{"title":"Reconditioned Transfer Cases","description":"\u003cp\u003eReconditioned 4x4 transfer cases, sold on an exchange basis.\u003c\/p\u003e","products":[{"product_id":"boite-de-transfert-toyota-land-cruiser-3-0-d-4d-reconditionne-361106d251","title":"Reconditioned Toyota Land Cruiser 3.0 D-4D Transfer Case – Transfer – Ref. 361106D251","description":"\u003ch2\u003eReconditioned Toyota Land Cruiser 3.0 D-4D Transfer Case – Reference 361106D251\u003c\/h2\u003e\u003cp\u003eYour reconditioned transfer case for the Toyota Land Cruiser 3.0 D-4D (2982 cm³, engine 1KD-FTV) is restored to full reliability through a complete rebuild carried out using your own unit, under reference 361106D251. On this model, the transfer case distributes torque between the front and rear axles, placing considerable demands on its internal gears during off-road use and frequent changes of drive mode. This service is aimed at Land Cruiser owners fitted with the 1KD-FTV engine whose transfer case reference 361106D251 is showing signs of mechanical wear.\u003c\/p\u003e\u003ch2\u003eSigns That Your Transfer Case Needs Replacing\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eDull noise or grinding when engaging 4x4 mode\u003c\/li\u003e\n\u003cli\u003eUnusual vibrations felt inside the cabin while driving\u003c\/li\u003e\n\u003cli\u003eDifficulty or failure to engage four-wheel drive mode\u003c\/li\u003e\n\u003cli\u003eFour-wheel drive warning light illuminated on the dashboard\u003c\/li\u003e\n\u003cli\u003eClunking or juddering when changing drive mode\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eRebuild of Your Own Unit, Ready to Refit\u003c\/h2\u003e\u003cp\u003eAs part of this service, you send us your own transfer case reference 361106D251. It is fully stripped down, then cleaned and inspected before all internal wear parts are replaced; it is then reassembled to manufacturer tolerances and tested on a bench. Once rebuilt, your unit is returned to you ready to be refitted to your Land Cruiser 3.0 D-4D. The service does not include the electronics of this transfer case: that component remains the original unit from your vehicle and must be reused as-is, as the electronic elements are neither reconditioned nor tested as part of this rebuild.\u003c\/p\u003e\u003ch2\u003eCompatibility\u003c\/h2\u003e\u003cp\u003eThis rebuild applies to the transfer case reference 361106D251 fitted to Toyota Land Cruiser 3.0 D-4D vehicles equipped with the 1KD-FTV engine, with an engine capacity of 2982 cm³.\u003c\/p\u003e\u003ch2\u003eWarranty and Payment\u003c\/h2\u003e\u003cp\u003eThis rebuilt unit comes with a 12-month parts warranty, subject to fitting by a qualified professional. Payment for this service can be spread over multiple instalments, in up to 10 instalments.\u003c\/p\u003e\u003cp\u003eEDEN BOITES supports you from quote through to the return of your rebuilt unit.\u003c\/p\u003e","brand":"Toyota","offers":[{"title":"Default Title","offer_id":42783477858389,"sku":"361106D251_TRANSFERT","price":2295.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0656\/9161\/5317\/files\/boite-de-transfert-echange-standard_2828cbdc-1634-4603-a597-35de3f16c6f9.png?v=1785222775"},{"product_id":"boite-de-transfert-bmw-serie-5-3-0d-reconditionne-atc350","title":"Reconditioned BMW Série 5 3.0d Transfer Case – Transfer – Ref. ATC350","description":"\u003ch2\u003eReconditioned BMW Série 5 3.0d Transfer Case – Reference ATC350\u003c\/h2\u003e\u003cp\u003eThis reconditioned transfer case for the BMW Série 5 3.0d, compatible with M57D30, 306D2, 306D3 and 306D5 engines of 2993 cm³, is available under reference ATC350. The reconditioning process involves a complete strip-down of the transfer case, thorough cleaning and inspection of every component, replacement of internal wear parts such as gears, bearings and seals, followed by reassembly to manufacturer tolerances and a bench test prior to dispatch.\u003c\/p\u003e\u003ch2\u003eSigns That Your Transfer Case Needs Replacing\u003c\/h2\u003e\u003cp\u003eOn a Série 5 3.0d fitted with all-wheel drive, several warning signs point to transfer case wear: grinding or clunking noises at low speed, vibrations felt in the cabin during torque distribution changes, the xDrive warning light illuminating on the dashboard, loss of traction on slippery surfaces, or visible oil leaks beneath the vehicle. These symptoms warrant prompt inspection before the ATC350 transfer case suffers irreversible damage.\u003c\/p\u003e\u003ch2\u003eExchange Basis – Transfer Case Rebuilt to 0 km\u003c\/h2\u003e\u003cp\u003eThis transfer case is part of our exchange range: it is rebuilt to 0 km and dispatched before the old unit is collected. The garage receives the reconditioned ATC350 transfer case first, so the vehicle is not left off the road; the old transfer case, with its casing intact, is only collected after delivery and fitting of the new unit. Return of the old unit is required, in accordance with our Terms and Conditions.\u003c\/p\u003e\u003cp\u003eThis transfer case is sold without the management electronics: this component is not supplied or included in the sale, it is neither reconditioned nor tested, and remains the vehicle's original unit, to be reused by the customer.\u003c\/p\u003e\u003ch2\u003eCompatibility\u003c\/h2\u003e\u003cp\u003eThe ATC350 reference fits BMW Série 5 3.0d models equipped with M57D30, 306D2, 306D3 or 306D5 engines of 2993 cm³. Please verify your engine code before ordering.\u003c\/p\u003e\u003ch2\u003eWarranty and Payment\u003c\/h2\u003e\u003cp\u003eThis transfer case comes with a 24-month parts warranty, valid subject to fitting by a qualified professional. Payment can be spread over multiple instalments, in up to 10 instalments.\u003c\/p\u003e\u003cp\u003eEDEN BOITES supports you from quote through to collection of the old unit.\u003c\/p\u003e","brand":"BMW","offers":[{"title":"Default Title","offer_id":42783477891157,"sku":"ATC350_TRANSFERT","price":1680.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0656\/9161\/5317\/files\/boite-de-transfert-echange-standard_2c248f27-6328-4c30-8012-eab2c7ce7a9c.png?v=1785134599"},{"product_id":"boite-de-transfert-bmw-serie-3-3-0d-reconditionne-atc35l","title":"Reconditioned BMW Série 3 3.0d Transfer Case – Transfer – Ref. ATC35L","description":"\u003ch2\u003eReconditioned BMW Série 3 3.0d Transfer Case ATC35L\u003c\/h2\u003e\u003cp\u003eThis reconditioned transfer case for the BMW Série 3 3.0d, with a 2993 cm³ engine, corresponds to reference ATC35L and restores torque distribution between your vehicle's axles. The reconditioning process involves a complete strip-down of the unit, thorough cleaning and rigorous inspection of every internal component, followed by replacement of all wear parts such as gears, bearings and seals. The transfer case is then reassembled to manufacturer tolerances and bench-tested before dispatch.\u003c\/p\u003e\u003ch2\u003eSigns That Your Transfer Case Needs Replacing\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003exDrive or 4x4 warning light illuminated on the dashboard\u003c\/li\u003e\n\u003cli\u003eGrinding or clunking noise from the rear unit when changing direction\u003c\/li\u003e\n\u003cli\u003eNoticeable vibrations at low speed or when cornering sharply\u003c\/li\u003e\n\u003cli\u003eLoss of traction or abnormal slipping in wet or snowy conditions\u003c\/li\u003e\n\u003cli\u003eVisible oil leak beneath the transfer case housing\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eExchange: The Solution That Keeps Your Vehicle on the Road\u003c\/h2\u003e\u003cp\u003eWith this reconditioned transfer case reference ATC35L, the old unit is not collected before delivery. The reconditioned unit is dispatched first, so the garage is never left without a part and the axle is never left immobilised. The old transfer case, with its housing intact, is only collected after delivery and installation of the new unit; return of the old unit is required in accordance with our Terms and Conditions. This transfer case is sold without the electronics: this module is neither supplied nor included in the sale, it is neither reconditioned nor tested, and remains the vehicle's original unit, to be reused by your installer.\u003c\/p\u003e\u003ch2\u003eCompatibility\u003c\/h2\u003e\u003cp\u003eThis reconditioned transfer case is compatible with vehicles fitted with the M57D30 (306D2) and M57N2 (306D3) engines.\u003c\/p\u003e\u003ch2\u003eWarranty and Payment\u003c\/h2\u003e\u003cp\u003eThis part carries a 24-month parts warranty, subject to fitting by a qualified professional. Payment can be spread over multiple instalments, in up to 10 instalments.\u003c\/p\u003e\u003cp\u003eEDEN BOITES supports you from quote through to collection of the old unit.\u003c\/p\u003e\u003ch2\u003eCompatible Vehicles (Ref. ATC35L)\u003c\/h2\u003e\u003cp\u003eThis reference also fits:\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\u003ca href=\"\/en\/products\/boite-de-transfert-bmw-serie-5-3-0d-reconditionne-atc35l\"\u003eReconditioned BMW Série 5 3.0d Transfer Case – Transfer – Ref. ATC35L\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/en\/products\/boite-de-transfert-bmw-serie-7-3-0i-reconditionne-atc35l\"\u003eReconditioned BMW Série 7 3.0i Transfer Case – Transfer – Ref. ATC35L\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/en\/products\/boite-de-transfert-bmw-serie-6-3-0d-reconditionne-atc35l\"\u003eReconditioned BMW Série 6 3.0d Transfer Case – Transfer – Ref. ATC35L\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/en\/products\/boite-de-transfert-bmw-serie-4-3-0i-reconditionne-atc35l\"\u003eReconditioned BMW Série 4 3.0i Transfer Case – Transfer – Ref. ATC35L\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"BMW","offers":[{"title":"Default Title","offer_id":42783478186069,"sku":"ATC35L_TRANSFERT","price":1680.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0656\/9161\/5317\/files\/boite-de-transfert-echange-standard_d6330252-614e-4ed5-8a47-10f16185ec98.png?v=1785228125"},{"product_id":"boite-de-transfert-bmw-serie-5-3-0d-reconditionne-atc35l","title":"Reconditioned BMW Série 5 3.0d Transfer Case – Transfer – Ref. ATC35L","description":"\u003ch2\u003eReconditioned BMW Série 5 3.0d Transfer Case – ATC35L\u003c\/h2\u003e\u003cp\u003eThis reconditioned transfer case for the BMW Série 5 3.0d, with a 2993 cm³ engine (engine codes M57D30, 306D2, 306D3, 306D5), carries the reference ATC35L and is designed to replace a failed original unit. The reconditioning process involves a full strip-down, thorough cleaning and inspection of every component, replacement of worn gears, bearings and seals, then reassembly to manufacturer tolerances followed by a bench test before dispatch. This process ensures performance equivalent to that of a brand-new original part.\u003c\/p\u003e\u003ch2\u003eSigns That Your Transfer Case Needs Replacing\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eMetallic noise or grinding when engaging four-wheel drive\u003c\/li\u003e\n\u003cli\u003eVibrations through the bodywork under acceleration or in tight corners\u003c\/li\u003e\n\u003cli\u003exDrive warning light illuminated on the dashboard\u003c\/li\u003e\n\u003cli\u003eJuddering or failure to engage four-wheel drive\u003c\/li\u003e\n\u003cli\u003eVisible oil leak beneath the transfer case housing\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eExchange Basis – No Waiting Around\u003c\/h2\u003e\u003cp\u003eThis reconditioned ATC35L transfer case is supplied on an exchange basis: it is dispatched to the garage straight away, without waiting for the old unit to be returned first. The old transfer case, with its housing intact, is only collected after the ATC35L has been delivered and fitted, so the vehicle's axle is not left immobilised during the process. Return of the old unit is required, in accordance with our Terms and Conditions.\u003c\/p\u003e\u003ch2\u003eExclusion: Electronics Not Included\u003c\/h2\u003e\u003cp\u003eThis transfer case is sold without the management electronics: this module is not supplied or included in the sale, it is neither reconditioned nor tested, and remains the vehicle's original unit, to be reused by the customer during fitting.\u003c\/p\u003e\u003ch2\u003eCompatibility\u003c\/h2\u003e\u003cp\u003eThis ATC35L reference fits BMW Série 5 3.0d models equipped with the M57D30, 306D2, 306D3 and 306D5 engines, with an engine capacity of 2993 cm³.\u003c\/p\u003e\u003ch2\u003eWarranty and Payment\u003c\/h2\u003e\u003cp\u003eThe ATC35L transfer case is covered by a 24-month parts warranty, valid subject to fitting being carried out by a qualified professional. Payment can be spread over multiple instalments, in up to 10 instalments.\u003c\/p\u003e\u003cp\u003eEDEN BOITES supports you from quote through to collection of the old unit.\u003c\/p\u003e\u003ch2\u003eCompatible Vehicles (Ref. ATC35L)\u003c\/h2\u003e\u003cp\u003eThis reference also fits:\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\u003ca href=\"\/en\/products\/boite-de-transfert-bmw-serie-3-3-0d-reconditionne-atc35l\"\u003eReconditioned BMW Série 3 3.0d Transfer Case – Transfer – Ref. ATC35L\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/en\/products\/boite-de-transfert-bmw-serie-7-3-0i-reconditionne-atc35l\"\u003eReconditioned BMW Série 7 3.0i Transfer Case – Transfer – Ref. ATC35L\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/en\/products\/boite-de-transfert-bmw-serie-6-3-0d-reconditionne-atc35l\"\u003eReconditioned BMW Série 6 3.0d Transfer Case – Transfer – Ref. ATC35L\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/en\/products\/boite-de-transfert-bmw-serie-4-3-0i-reconditionne-atc35l\"\u003eReconditioned BMW Série 4 3.0i Transfer Case – Transfer – Ref. ATC35L\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"BMW","offers":[{"title":"Default Title","offer_id":42783478251605,"sku":"ATC35L_TRANSFERT","price":1680.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0656\/9161\/5317\/files\/boite-de-transfert-echange-standard_64e9d840-1e43-4e13-bb0e-4b326d7c4643.png?v=1785228125"},{"product_id":"boite-de-transfert-bmw-serie-7-3-0i-reconditionne-atc35l","title":"Reconditioned BMW Série 7 3.0i Transfer Case – Transfer – Ref. ATC35L","description":"\u003ch2\u003eReconditioned BMW Série 7 3.0i Transfer Case – Reference ATC35L\u003c\/h2\u003e\u003cp\u003eThis reconditioned transfer case is designed for the BMW Série 7 3.0i fitted with the M54B30 or N52B30 engine, with an engine capacity of 2996 cm³. It carries the reference ATC35L and is a direct replacement for the vehicle's original four-wheel-drive transmission unit.\u003c\/p\u003e\u003ch2\u003eSigns That Your Transfer Case Needs Replacing\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eRumbling or clunking noise from beneath the floor when changing direction\u003c\/li\u003e\n\u003cli\u003eVibrations felt through the bodywork at low speed or under acceleration\u003c\/li\u003e\n\u003cli\u003eFour-wheel-drive system warning light illuminated on the dashboard\u003c\/li\u003e\n\u003cli\u003eLoss of grip or unstable handling on wet or snowy surfaces\u003c\/li\u003e\n\u003cli\u003eVisible oil leak from the transfer case housing\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eWhat the Reconditioning Includes\u003c\/h2\u003e\u003cp\u003eReconditioning of this transfer case follows a thorough process: complete strip-down of the housing, cleaning and inspection of every component, replacement of internal wear parts such as bearings and seals, reassembly to manufacturer tolerances, and bench testing prior to dispatch. This transfer case is sold without the associated electronics: that module is neither supplied nor included in the sale, it is neither reconditioned nor tested, and it remains the vehicle's original unit, to be reused by the customer.\u003c\/p\u003e\u003ch2\u003eDelivery on a Deferred Exchange Basis\u003c\/h2\u003e\u003cp\u003eThis transfer case is offered on an exchange basis. The reconditioned unit is dispatched first, before the old unit is collected: the garage is therefore never left without a part and the vehicle is not off the road. The old transfer case, with its casing intact, is only collected after the reconditioned unit has been delivered and fitted. Return of the old unit is required, in accordance with our Terms and Conditions.\u003c\/p\u003e\u003ch2\u003eCompatibility\u003c\/h2\u003e\u003cp\u003eThis ATC35L reference is compatible with BMW Série 7 3.0i vehicles fitted with the M54B30 and N52B30 engines, with an engine capacity of 2996 cm³. Please verify the original reference number before placing your order.\u003c\/p\u003e\u003ch2\u003eWarranty and Payment\u003c\/h2\u003e\u003cp\u003eThis reconditioned transfer case comes with a 24-month parts warranty, subject to fitting by a qualified professional. Payment for your order can be spread over several instalments, in up to 10 instalments.\u003c\/p\u003e\u003cp\u003eEDEN BOITES supports you every step of the way, from quote to collection of the old unit.\u003c\/p\u003e\u003ch2\u003eCompatible Vehicles (Ref. ATC35L)\u003c\/h2\u003e\u003cp\u003eThis reference also fits:\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\u003ca href=\"\/en\/products\/boite-de-transfert-bmw-serie-3-3-0d-reconditionne-atc35l\"\u003eReconditioned BMW Série 3 3.0d Transfer Case – Transfer – Ref. ATC35L\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/en\/products\/boite-de-transfert-bmw-serie-5-3-0d-reconditionne-atc35l\"\u003eReconditioned BMW Série 5 3.0d Transfer Case – Transfer – Ref. ATC35L\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/en\/products\/boite-de-transfert-bmw-serie-6-3-0d-reconditionne-atc35l\"\u003eReconditioned BMW Série 6 3.0d Transfer Case – Transfer – Ref. ATC35L\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/en\/products\/boite-de-transfert-bmw-serie-4-3-0i-reconditionne-atc35l\"\u003eReconditioned BMW Série 4 3.0i Transfer Case – Transfer – Ref. ATC35L\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"BMW","offers":[{"title":"Default Title","offer_id":42783478284373,"sku":"ATC35L_TRANSFERT","price":1680.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0656\/9161\/5317\/files\/boite-de-transfert-echange-standard_f7c471f4-5fc7-41b8-a932-0713c1d41f76.png?v=1785228126"},{"product_id":"boite-de-transfert-bmw-x4-3-0d-reconditionne-atc450","title":"Reconditioned BMW X4 3.0d Transfer Case – Transfer – Ref. ATC450","description":"\u003ch2\u003eReconditioned BMW X4 3.0d Transfer Case – ATC450\u003c\/h2\u003e\u003cp\u003eThis reconditioned transfer case is designed for the BMW X4 3.0d fitted with N57D30 or B57D30 engines, with an engine capacity of 2993 cm³, and carries the reference ATC450. Reconditioning involves a full strip-down, thorough cleaning and inspection, replacement of all internal wear parts, reassembly to manufacturer tolerances, and a bench test – restoring reliable operation of the xDrive system.\u003c\/p\u003e\u003ch2\u003eSigns That Your Transfer Case Needs Replacing\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eDull thud or grinding noise at low speed when cornering\u003c\/li\u003e\n\u003cli\u003eVibrations felt in the cabin during torque transfer\u003c\/li\u003e\n\u003cli\u003exDrive or 4x4 warning light illuminated on the dashboard\u003c\/li\u003e\n\u003cli\u003eLoss of traction on slippery surfaces or under acceleration\u003c\/li\u003e\n\u003cli\u003eJuddering when switching between drive modes\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eExchange Basis – Available Immediately\u003c\/h2\u003e\u003cp\u003eThis ATC450 reference is offered as an exchange unit, rebuilt to 0 km. The reconditioned transfer case is dispatched first, so the garage is never left without a part and vehicle downtime is avoided. The old unit, with its casing intact, is only collected after delivery and fitting; its return is required in accordance with our Terms and Conditions. Please note that this transfer case is sold without the associated electronics: this component is neither supplied nor included in the sale, it is neither reconditioned nor tested, and it remains the vehicle's original unit, to be reused by the customer during fitting.\u003c\/p\u003e\u003ch2\u003eCompatibility\u003c\/h2\u003e\u003cp\u003eThis reconditioned transfer case under reference ATC450 is suitable for vehicles fitted with N57D30 and B57D30 engines, with an engine capacity of 2993 cm³. We recommend verifying the exact match with your original part number before ordering.\u003c\/p\u003e\u003ch2\u003eWarranty and Payment\u003c\/h2\u003e\u003cp\u003eThis part carries a 24-month parts warranty, valid subject to fitting by a qualified professional. Payment can be spread over several instalments, in up to 10 instalments.\u003c\/p\u003e\u003cp\u003eEDEN BOITES supports you from quote through to collection of the old unit.\u003c\/p\u003e\u003ch2\u003eCompatible Vehicles (Ref. ATC450)\u003c\/h2\u003e\u003cp\u003eThis reference also fits:\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\u003ca href=\"\/en\/products\/boite-de-transfert-bmw-x5-3-0d-reconditionne-atc450\"\u003eReconditioned BMW X5 3.0d Transfer Case – Transfer – Ref. ATC450\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/en\/products\/boite-de-transfert-bmw-x6-3-0d-reconditionne-atc450\"\u003eReconditioned BMW X6 3.0d Transfer Case – Transfer – Ref. ATC450\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"BMW","offers":[{"title":"Default Title","offer_id":42783478317141,"sku":"ATC450_TRANSFERT","price":1680.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0656\/9161\/5317\/files\/boite-de-transfert-echange-standard_2115543e-808e-4f22-8fd3-ab3f9e735983.png?v=1785228129"},{"product_id":"boite-de-transfert-bmw-x5-3-0d-reconditionne-atc450","title":"Reconditioned BMW X5 3.0d Transfer Case – Transfer – Ref. ATC450","description":"\u003ch2\u003eReconditioned BMW X5 3.0d Transfer Case – Reference ATC450\u003c\/h2\u003e\u003cp\u003eThis reconditioned transfer case for the BMW X5 3.0d, compatible with M57D30 (306D1\/306D2), M57N2 (306D3) and N57D30 engines with a 2 993 cm³ capacity, is supplied under reference ATC450. The reconditioning process involves a full strip-down of the unit, thorough cleaning and inspection of every component, replacement of internal wear parts such as gears, bearings and seals, followed by reassembly to manufacturer tolerances and a bench test prior to dispatch.\u003c\/p\u003e\u003ch2\u003eSigns That Your Transfer Case Needs Replacing\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eUnusual noise when torque is distributed between the axles\u003c\/li\u003e\n\u003cli\u003eVibrations or juddering felt during tight cornering or on slippery surfaces\u003c\/li\u003e\n\u003cli\u003exDrive warning light or all-wheel-drive system warning illuminated on the dashboard\u003c\/li\u003e\n\u003cli\u003eDifficulty engaging four-wheel-drive mode\u003c\/li\u003e\n\u003cli\u003eOil leak detected at the transfer case housing\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eExchange Basis: No Downtime for Your Garage\u003c\/h2\u003e\u003cp\u003eThis ATC450 transfer case is dispatched immediately on an exchange basis: the reconditioned unit is sent out before the old one is collected. The old housing, whether intact casing or complete unit, is only taken back after delivery and fitting, so the axle is never left off the road unnecessarily. Return of the old unit is required, in accordance with our Terms and Conditions.\u003c\/p\u003e\u003ch2\u003eExclusion: Electronics Not Included\u003c\/h2\u003e\u003cp\u003eThis ATC450 transfer case is sold without the associated electronics: the electronic control unit is not supplied or included in the sale, it is neither reconditioned nor tested, and it remains the vehicle's original unit, to be reused by the customer during fitting.\u003c\/p\u003e\u003ch2\u003eCompatibility\u003c\/h2\u003e\u003cp\u003eReference ATC450 is suitable for BMW X5 3.0d vehicles fitted with M57D30 (306D1\/306D2), M57N2 (306D3) and N57D30 engines, with a capacity of 2 993 cm³.\u003c\/p\u003e\u003ch2\u003eWarranty and Payment\u003c\/h2\u003e\u003cp\u003eThis transfer case comes with a 24-month parts warranty, subject to fitting by a qualified professional. Payment can be spread over up to 10 instalments.\u003c\/p\u003e\u003cp\u003eEDEN BOITES supports you from quote through to collection of the old unit.\u003c\/p\u003e\u003ch2\u003eCompatible Vehicles (Ref. ATC450)\u003c\/h2\u003e\u003cp\u003eThis reference also fits:\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\u003ca href=\"\/en\/products\/boite-de-transfert-bmw-x4-3-0d-reconditionne-atc450\"\u003eReconditioned BMW X4 3.0d Transfer Case – Transfer – Ref. ATC450\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/en\/products\/boite-de-transfert-bmw-x6-3-0d-reconditionne-atc450\"\u003eReconditioned BMW X6 3.0d Transfer Case – Transfer – Ref. ATC450\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"BMW","offers":[{"title":"Default Title","offer_id":42783478349909,"sku":"ATC450_TRANSFERT","price":1680.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0656\/9161\/5317\/files\/boite-de-transfert-echange-standard_bebd0fab-8bb1-4c31-a8ab-d0f63dc8e1e6.png?v=1785228130"},{"product_id":"boite-de-transfert-bmw-x6-3-0d-reconditionne-atc450","title":"Reconditioned BMW X6 3.0d Transfer Case – Transfer – Ref. ATC450","description":"\u003ch2\u003eReconditioned BMW X6 3.0d ATC450 Transfer Case\u003c\/h2\u003e\u003cp\u003eThe reconditioned transfer case for the BMW X6 3.0d (2993 cm³, engine codes M57D30 (306D3) and N57D30A), reference ATC450, distributes torque between the front and rear axles on this xDrive all-wheel-drive model. As part of the reconditioning process, the transfer case is fully stripped, cleaned and inspected; worn internal components — including gears, bearings and seals — are replaced, and the unit is then reassembled to manufacturer tolerances and bench-tested before dispatch.\u003c\/p\u003e\u003ch2\u003eSigns that your X6 transfer case needs replacing\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eGrinding or clunking noise when engaging 4x4 mode or negotiating tight corners\u003c\/li\u003e\n\u003cli\u003eNoticeable vibrations through the floor at low speed\u003c\/li\u003e\n\u003cli\u003exDrive or 4x4 warning light illuminated on the dashboard\u003c\/li\u003e\n\u003cli\u003eAbnormal torque distribution or a sensation of axle slip\u003c\/li\u003e\n\u003cli\u003eVisible oil leak from the transfer case housing\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eExchange basis: your X6 stays on the road\u003c\/h2\u003e\u003cp\u003eThis ATC450 transfer case is offered on an exchange basis, rebuilt to 0 km. The reconditioned unit is delivered and fitted first, so your vehicle is never off the road waiting for a replacement. The old transfer case — with its housing intact — is only collected after the new unit has been delivered and installed; return of the old unit is required, in accordance with our Terms and Conditions.\u003c\/p\u003e\u003cp\u003eThis transfer case is sold without the electronics: this component is neither reconditioned nor tested — it remains the original unit from your vehicle and must be reused by you during reassembly.\u003c\/p\u003e\u003ch2\u003eCompatibility\u003c\/h2\u003e\u003cp\u003eReference ATC450 is suitable for BMW X6 3.0d models fitted with engine codes M57D30 (306D3) and N57D30A.\u003c\/p\u003e\u003ch2\u003eWarranty and payment\u003c\/h2\u003e\u003cp\u003eThis reconditioned transfer case, reference ATC450, comes with a 24-month parts warranty, subject to fitting by a qualified professional. Payment can be spread over multiple instalments — pay in up to 10 instalments.\u003c\/p\u003e\u003cp\u003eEDEN BOITES supports you every step of the way, from your initial quote through to collection of the old unit.\u003c\/p\u003e\u003ch2\u003eCompatible vehicles (ref. ATC450)\u003c\/h2\u003e\u003cp\u003eThis reference also fits:\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\u003ca href=\"\/en\/products\/boite-de-transfert-bmw-x4-3-0d-reconditionne-atc450\"\u003eReconditioned BMW X4 3.0d Transfer Case – Transfer – Ref. ATC450\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/en\/products\/boite-de-transfert-bmw-x5-3-0d-reconditionne-atc450\"\u003eReconditioned BMW X5 3.0d Transfer Case – Transfer – Ref. ATC450\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"BMW","offers":[{"title":"Default Title","offer_id":42783478382677,"sku":"ATC450_TRANSFERT","price":1680.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0656\/9161\/5317\/files\/boite-de-transfert-echange-standard_a7d6d785-dfaf-42f1-a616-dc3c74913eee.png?v=1785228130"},{"product_id":"boite-de-transfert-bmw-x4-3-0d-reconditionne-atc45l","title":"Reconditioned BMW X4 3.0d Transfer Case – Transfer – Ref. ATC45L","description":"\u003ch2\u003eReconditioned BMW X4 3.0d Transfer Case – Reference ATC45L\u003c\/h2\u003e\u003cp\u003eThis reconditioned transfer case for the BMW X4 3.0d, compatible with N57D30 and B57D30 engines, carries the reference ATC45L and suits an engine capacity of 2993 cm³. Reconditioning involves a complete strip-down of the transfer case, thorough cleaning and inspection of every component, followed by replacement of all internal wear parts such as gears, bearings and seals. The unit is then reassembled to manufacturer tolerances and bench-tested before dispatch to ensure performance equivalent to a new transfer case. This final inspection also verifies correct engagement of four-wheel-drive mode before the unit is offered for sale under reference ATC45L.\u003c\/p\u003e\u003ch2\u003eSigns that your transfer case needs replacing\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eDull rumbling or grinding noise from the transfer case housing under acceleration\u003c\/li\u003e\n\u003cli\u003eUnusual vibrations felt inside the cabin while driving\u003c\/li\u003e\n\u003cli\u003eFour-wheel-drive system warning light illuminated on the dashboard\u003c\/li\u003e\n\u003cli\u003eDifficulty or failure to engage four-wheel-drive mode\u003c\/li\u003e\n\u003cli\u003eJuddering or jerking when exiting tight corners\u003c\/li\u003e\n\u003cli\u003eVisible oil leak from the transfer case housing\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eExchange basis: the old unit is not collected before delivery\u003c\/h2\u003e\u003cp\u003eThe reconditioned ATC45L transfer case is dispatched first, before your old unit is collected. Your garage is therefore never left without a part and the axle is not off the road while you wait. The old transfer case, with its casing intact, is only collected after the reconditioned unit has been delivered and fitted; return of the old unit is required in accordance with our Terms and Conditions.\u003c\/p\u003e\u003cp\u003eThis transfer case is sold without the electronics: the electronic module is not supplied or included in the sale, it is neither reconditioned nor tested, and it remains the vehicle's original module, to be reused by the customer during fitting.\u003c\/p\u003e\u003ch2\u003eCompatibility\u003c\/h2\u003e\u003cp\u003eThis reconditioned transfer case, reference ATC45L, is suitable for BMW X4 3.0d models fitted with N57D30 and B57D30 engines. Before placing an order, we recommend checking the engine code on your vehicle registration document to confirm exact compatibility with your vehicle.\u003c\/p\u003e\u003ch2\u003eWarranty and payment\u003c\/h2\u003e\u003cp\u003eThis transfer case comes with a 24-month parts warranty, valid subject to fitting by a qualified professional. You can spread the cost of your order and pay in up to 10 instalments.\u003c\/p\u003e\u003cp\u003eEDEN BOITES supports you every step of the way, from quote through to collection of the old unit.\u003c\/p\u003e\u003ch2\u003eCompatible vehicles (ref. ATC45L)\u003c\/h2\u003e\u003cp\u003eThis reference also fits:\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\u003ca href=\"\/en\/products\/boite-de-transfert-bmw-x5-3-0d-reconditionne-atc45l\"\u003eReconditioned BMW X5 3.0d Transfer Case – Transfer – Ref. ATC45L\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/en\/products\/boite-de-transfert-bmw-x6-3-0d-reconditionne-atc45l\"\u003eReconditioned BMW X6 3.0d Transfer Case – Transfer – Ref. ATC45L\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"BMW","offers":[{"title":"Default Title","offer_id":42783478415445,"sku":"ATC45L_TRANSFERT","price":1680.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0656\/9161\/5317\/files\/boite-de-transfert-echange-standard_5ddc025b-dfeb-4fc2-acbd-93db4ca82190.png?v=1785228678"},{"product_id":"boite-de-transfert-bmw-x5-3-0d-reconditionne-atc45l","title":"Reconditioned BMW X5 3.0d Transfer Case – Transfer – Ref. ATC45L","description":"\u003ch2\u003eReconditioned BMW X5 3.0d Transfer Case – Ref. ATC45L\u003c\/h2\u003e\u003cp\u003eThis reconditioned transfer case is designed for the BMW X5 3.0d, a 2993 cm³ diesel engine, compatible with M57D30 (306D1\/306D2), M57N2 (306D3) and N57D30 engine blocks, and carries the reference ATC45L. The reconditioning process involves a full strip-down of the unit, thorough cleaning and inspection of every component, followed by replacement of all internal wear parts such as gears, synchros, bearings and seals. The unit is then reassembled to manufacturer tolerances and bench-tested before dispatch.\u003c\/p\u003e\u003ch2\u003eSigns That Your Transfer Case Needs Replacing\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eRumbling or grinding noise at low speed, particularly on tight bends\u003c\/li\u003e\n\u003cli\u003eVibrations felt through the floor when changing direction\u003c\/li\u003e\n\u003cli\u003e4x4 system warning light illuminated on the dashboard\u003c\/li\u003e\n\u003cli\u003eDifficulty distributing torque between the front and rear axles\u003c\/li\u003e\n\u003cli\u003eJuddering or jerking during acceleration on slippery surfaces\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eExchange Basis – Available Immediately\u003c\/h2\u003e\u003cp\u003eThis transfer case is rebuilt to 0 km and operates on a deferred exchange basis: the reconditioned unit is dispatched first, avoiding any need to take the vehicle or workshop ramp out of service. Once the ATC45L has been fitted, the old transfer case is collected after delivery and installation. Return of the old unit is required in accordance with our Terms and Conditions.\u003c\/p\u003e\u003cp\u003eThis transfer case is sold without the electronics: this component is neither supplied nor included in the sale, it is neither reconditioned nor tested, and remains the vehicle's original unit, to be reused by the customer.\u003c\/p\u003e\u003ch2\u003eCompatibility\u003c\/h2\u003e\u003cp\u003eThe ATC45L reference is suitable for vehicles fitted with engine codes M57D30 (306D1\/306D2), M57N2 (306D3) and N57D30, all mounted in the BMW X5 3.0d diesel.\u003c\/p\u003e\u003ch2\u003eWarranty and Payment\u003c\/h2\u003e\u003cp\u003eThis reconditioned transfer case is covered by a 24-month parts warranty, valid subject to fitting by a qualified professional. Payment can be spread over multiple instalments, in up to 10 instalments.\u003c\/p\u003e\u003cp\u003eEDEN BOITES supports you from quote through to collection of the old unit.\u003c\/p\u003e\u003ch2\u003eCompatible Vehicles (Ref. ATC45L)\u003c\/h2\u003e\u003cp\u003eThis reference also fits:\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\u003ca href=\"\/en\/products\/boite-de-transfert-bmw-x4-3-0d-reconditionne-atc45l\"\u003eReconditioned BMW X4 3.0d Transfer Case – Transfer – Ref. ATC45L\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/en\/products\/boite-de-transfert-bmw-x6-3-0d-reconditionne-atc45l\"\u003eReconditioned BMW X6 3.0d Transfer Case – Transfer – Ref. ATC45L\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"BMW","offers":[{"title":"Default Title","offer_id":42783478448213,"sku":"ATC45L_TRANSFERT","price":1680.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0656\/9161\/5317\/files\/boite-de-transfert-echange-standard_c0e4fcd9-9f59-4106-ac0a-b72f5ba78937.png?v=1785228678"},{"product_id":"boite-de-transfert-bmw-x6-3-0d-reconditionne-atc45l","title":"Reconditioned BMW X6 3.0d Transfer Case – Transfer – Ref. ATC45L","description":"\u003ch2\u003eReconditioned BMW X6 3.0d Transfer Case – Reference ATC45L\u003c\/h2\u003e\u003cp\u003eThis reconditioned transfer case for the BMW X6 3.0d (2993 cm³), reference ATC45L, is designed for vehicles fitted with the M57D30 (306D3) and N57D30A engines. On an X6 3.0d, the transfer case distributes torque between the front and rear axles; when it wears, you will quickly notice traction problems, particularly on slippery surfaces or on hills.\u003c\/p\u003e\u003ch2\u003eSigns That Your Transfer Case Needs Replacing\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eGrinding or clunking noise under acceleration, especially on tight corners\u003c\/li\u003e\n\u003cli\u003exDrive or 4x4 warning light illuminated on the dashboard\u003c\/li\u003e\n\u003cli\u003eVibrations felt through the bodywork at a steady speed\u003c\/li\u003e\n\u003cli\u003eIntermittent loss of traction on wet or snow-covered roads\u003c\/li\u003e\n\u003cli\u003eJuddering or jerking when torque is transferred between the axles\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eExchange Basis: Immediate Dispatch, Return Later\u003c\/h2\u003e\u003cp\u003eThis ATC45L transfer case is fully reconditioned: it is completely stripped down, cleaned and inspected, all internal wear parts (gears, bearings, seals) are replaced, and it is then reassembled to manufacturer tolerances and bench-tested. Under the exchange scheme, the reconditioned unit is dispatched first so your vehicle is never off the road for long. The old transfer case, with its casing intact, is only collected after the new unit has been delivered and fitted; return of the old unit is required, in accordance with our Terms and Conditions.\u003c\/p\u003e\u003cp\u003eThis transfer case is sold without the electronics: the electronic component is not supplied or included in the sale, it is neither reconditioned nor tested, and remains the vehicle's original unit, to be reused by the customer.\u003c\/p\u003e\u003ch2\u003eCompatibility\u003c\/h2\u003e\u003cp\u003eReference ATC45L fits BMW X6 3.0d models equipped with the M57D30 (306D3) and N57D30A engines.\u003c\/p\u003e\u003ch2\u003eWarranty and Payment\u003c\/h2\u003e\u003cp\u003eThis transfer case comes with a 24-month parts warranty, valid provided fitting is carried out by a qualified professional. Payment can be spread over multiple instalments, in up to 10 instalments.\u003c\/p\u003e\u003cp\u003eEDEN BOITES supports you every step of the way, from your initial quote through to collection of the old unit.\u003c\/p\u003e\u003ch2\u003eCompatible Vehicles (Ref. ATC45L)\u003c\/h2\u003e\u003cp\u003eThis reference also fits:\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\u003ca href=\"\/en\/products\/boite-de-transfert-bmw-x4-3-0d-reconditionne-atc45l\"\u003eReconditioned BMW X4 3.0d Transfer Case – Transfer – Ref. ATC45L\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/en\/products\/boite-de-transfert-bmw-x5-3-0d-reconditionne-atc45l\"\u003eReconditioned BMW X5 3.0d Transfer Case – Transfer – Ref. ATC45L\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"BMW","offers":[{"title":"Default Title","offer_id":42783478480981,"sku":"ATC45L_TRANSFERT","price":1680.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0656\/9161\/5317\/files\/boite-de-transfert-echange-standard_706cab7b-f55c-4347-bd89-4760316795fe.png?v=1785228679"},{"product_id":"boite-de-transfert-bmw-serie-3-2-0d-reconditionne-atc300","title":"Reconditioned BMW Série 3 2.0d Transfer Case – Transfer – Ref. ATC300","description":"\u003ch2\u003eReconditioned BMW Série 3 2.0d Transfer Case – Ref. ATC300\u003c\/h2\u003e\u003cp\u003eThis reconditioned transfer case is designed for the BMW Série 3 2.0d fitted with a 1995 cm³ diesel engine, under reference ATC300. Reconditioning follows a rigorous process: full strip-down, cleaning and inspection of every component, replacement of internal wear parts such as bearings, seals and transfer chain, then reassembly to manufacturer tolerances and bench-testing prior to dispatch. Reference ATC300 ensures reliable compatibility with the relevant engine variants.\u003c\/p\u003e\u003ch2\u003eSigns That Your Transfer Case Needs Replacing\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eMetallic noises or grinding on tight corners\u003c\/li\u003e\n\u003cli\u003eUnusual vibrations when accelerating on slippery surfaces\u003c\/li\u003e\n\u003cli\u003eFour-wheel-drive warning light illuminated on the dashboard\u003c\/li\u003e\n\u003cli\u003eJolting or juddering when switching between two- and four-wheel drive\u003c\/li\u003e\n\u003cli\u003eAbnormal and uneven tyre wear caused by poor torque distribution\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eExchange Basis: Immediate Dispatch, Return of Old Unit Deferred\u003c\/h2\u003e\u003cp\u003eThis transfer case is sold on an exchange basis: it is rebuilt to 0 km and dispatched immediately, without waiting for the old unit to be received. The garage can therefore carry out the fitting without keeping the vehicle off the road. The original transfer case, with its casing intact, is only collected after delivery and installation; return of the old unit is required, in accordance with our Terms and Conditions.\u003c\/p\u003e\u003ch2\u003eWhat Is Not Included With This Transfer Case\u003c\/h2\u003e\u003cp\u003eThis transfer case is sold without the electronics. This module is neither supplied nor included in the sale; it is neither reconditioned nor tested, and remains the vehicle's original unit, to be reused by the customer.\u003c\/p\u003e\u003ch2\u003eCompatibility\u003c\/h2\u003e\u003cp\u003eThis transfer case, reference ATC300, is compatible with the M47D20, N47D20 and B47D20 engines fitted to the BMW Série 3 2.0d.\u003c\/p\u003e\u003ch2\u003eWarranty and Payment\u003c\/h2\u003e\u003cp\u003eThis transfer case comes with a 24-month parts warranty, subject to fitting being carried out by a qualified professional. Payment can be spread over multiple instalments, in up to 10 instalments.\u003c\/p\u003e\u003cp\u003eEDEN BOITES supports you from quote through to collection of the old unit.\u003c\/p\u003e\u003ch2\u003eCompatible Vehicles (Ref. ATC300)\u003c\/h2\u003e\u003cp\u003eThis reference also fits:\u003c\/p\u003e\u003cul\u003e\u003cli\u003e\u003ca href=\"\/en\/products\/boite-de-transfert-bmw-serie-5-3-0d-reconditionne-atc300\"\u003eReconditioned BMW Série 5 3.0d Transfer Case – Transfer – Ref. ATC300\u003c\/a\u003e\u003c\/li\u003e\u003c\/ul\u003e","brand":"BMW","offers":[{"title":"Default Title","offer_id":42783478513749,"sku":"ATC300_TRANSFERT","price":1680.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0656\/9161\/5317\/files\/boite-de-transfert-echange-standard_7cd51668-f745-4c1f-85d1-f7afe6cb8327.png?v=1785228711"},{"product_id":"boite-de-transfert-bmw-x5-3-0d-reconditionne-atc500","title":"Reconditioned BMW X5 3.0d Transfer Case – Transfer – Ref. ATC500","description":"\u003ch2\u003eReconditioned BMW X5 3.0d Transfer Case – Ref. ATC500\u003c\/h2\u003e\u003cp\u003eThe reconditioned transfer case for the BMW X5 3.0d, reference ATC500, restores full four-wheel-drive reliability to its original standard, covering 2993 cm³ engines fitted with the M57D30 (306D1\/306D2), M57N2 (306D3) or N57D30 blocks. This reconditioned unit has been completely stripped, cleaned and inspected before all worn internal components are replaced; it is then reassembled to manufacturer tolerances and bench-tested prior to dispatch under reference ATC500.\u003c\/p\u003e\u003ch2\u003eSigns That Your Transfer Case Needs Replacing\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eFour-wheel-drive warning light illuminated on the dashboard\u003c\/li\u003e\n\u003cli\u003eGrinding or clunking noise when turning on tight corners\u003c\/li\u003e\n\u003cli\u003eVibrations felt under acceleration, particularly on slippery surfaces\u003c\/li\u003e\n\u003cli\u003eDifficulty engaging or refusal to engage four-wheel-drive mode\u003c\/li\u003e\n\u003cli\u003eVisible oil leak from the transfer case housing\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eExchange Basis – Immediate Dispatch, Return Later\u003c\/h2\u003e\u003cp\u003eThis transfer case is sold on an exchange basis: the reconditioned unit is dispatched first, so your vehicle or workshop ramp is never left standing idle. The old transfer case, with its housing intact, is only collected once the new unit has been delivered and fitted; return of the old unit is required in accordance with our Terms and Conditions.\u003c\/p\u003e\u003cp\u003eThis transfer case is sold without the associated electronics: this component is neither reconditioned nor tested – it remains the vehicle's original unit and must be reused by the customer when fitting reference ATC500.\u003c\/p\u003e\u003ch2\u003eCompatibility\u003c\/h2\u003e\u003cp\u003eThis transfer case is compatible with BMW X5 3.0d models fitted with engine codes M57D30 (306D1\/306D2), M57N2 (306D3) and N57D30.\u003c\/p\u003e\u003ch2\u003eWarranty and Payment\u003c\/h2\u003e\u003cp\u003eThe reconditioned transfer case is covered by a 24-month parts warranty, subject to fitting by a qualified professional. Payment can be spread across up to 10 instalments.\u003c\/p\u003e\u003cp\u003eEDEN BOITES supports you every step of the way, from quote through to collection of the old unit.\u003c\/p\u003e","brand":"BMW","offers":[{"title":"Default Title","offer_id":42783478546517,"sku":"ATC500_TRANSFERT","price":1680.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0656\/9161\/5317\/files\/boite-de-transfert-echange-standard_ae7d364b-2beb-40c8-8b3d-454d0cc5a47f.png?v=1785228720"},{"product_id":"boite-de-transfert-bmw-serie-5-3-0d-reconditionne-atc300","title":"Reconditioned BMW Série 5 3.0d Transfer Case – Transfer – Ref. ATC300","description":"\u003ch2\u003eReconditioned BMW Série 5 3.0d Transfer Case – Reference ATC300\u003c\/h2\u003e\u003cp\u003eThis reconditioned transfer case is designed for BMW Série 5 3.0d models fitted with the M57D30, 306D2, 306D3 and 306D5 engines, with an engine capacity of 2993 cm³, under reference ATC300. The reconditioning process involves a complete strip-down, thorough cleaning and in-depth inspection of every component; any gears, bearings or seals showing signs of wear are replaced, and the unit is then reassembled to manufacturer tolerances before undergoing a bench test to confirm correct operation.\u003c\/p\u003e\u003ch2\u003eSigns That Your Transfer Case Needs Replacing\u003c\/h2\u003e\u003cp\u003eOn a BMW Série 5 3.0d, a failing transfer case often makes itself known through dull or metallic noises during torque transitions, vibrations felt through the floor, an all-wheel-drive warning light on the dashboard, juddering on corner exit, or uneven power distribution on wet roads. An oil leak at the casing or a noise that worsens under acceleration are also warning signs to watch out for.\u003c\/p\u003e\u003ch2\u003eExchange Basis: Immediate Dispatch, Deferred Return of the Old Unit\u003c\/h2\u003e\u003cp\u003eWith this ATC300 transfer case sold on an exchange basis, the reconditioned unit is dispatched first, without waiting for your old unit to be collected, so the vehicle is never off the road any longer than necessary. The old transfer case, in its intact condition, is only collected after the reconditioned unit has been delivered and fitted; however, its return is required in accordance with our Terms and Conditions.\u003c\/p\u003e\u003cp\u003eThis transfer case is sold without the electronics: this component is neither reconditioned nor tested — it remains the vehicle's original unit and must be reused by the customer.\u003c\/p\u003e\u003ch2\u003eCompatibility\u003c\/h2\u003e\u003cp\u003eReference ATC300 is intended for BMW Série 5 3.0d models powered by the M57D30, 306D2, 306D3 or 306D5 engine, with an engine capacity of 2993 cm³. Please check the match with your engine code before ordering to ensure the reconditioned transfer case is the correct fit.\u003c\/p\u003e\u003ch2\u003eWarranty and Payment\u003c\/h2\u003e\u003cp\u003eThis transfer case comes with a 24-month parts warranty, valid subject to fitting being carried out by a professional. Payment for your order can be spread over several instalments, in up to 10 instalments.\u003c\/p\u003e\u003cp\u003eEDEN BOITES supports you from quote through to collection of the old unit.\u003c\/p\u003e\u003ch2\u003eCompatible Vehicles (Ref. ATC300)\u003c\/h2\u003e\u003cp\u003eThis reference also fits:\u003c\/p\u003e\u003cul\u003e\u003cli\u003e\u003ca href=\"\/en\/products\/boite-de-transfert-bmw-serie-3-2-0d-reconditionne-atc300\"\u003eReconditioned BMW Série 3 2.0d Transfer Case – Transfer – Ref. ATC300\u003c\/a\u003e\u003c\/li\u003e\u003c\/ul\u003e","brand":"BMW","offers":[{"title":"Default Title","offer_id":42783478579285,"sku":"ATC300_TRANSFERT","price":1680.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0656\/9161\/5317\/files\/boite-de-transfert-echange-standard_a729cb41-16b5-428a-8a28-4c7cd11213cb.png?v=1785228711"},{"product_id":"boite-de-transfert-bmw-x5-3-0d-reconditionne-atc700","title":"Reconditioned BMW X5 3.0d Transfer Case – Transfer – Ref. ATC700","description":"\u003ch2\u003eReconditioned BMW X5 3.0d Transfer Case – Reference ATC700\u003c\/h2\u003e\u003cp\u003eThis reconditioned transfer case for the BMW X5 3.0d (2 993 cm³) is listed under reference ATC700, compatible with the M57D30 (306D1\/306D2), M57N2 (306D3) and N57D30 engine blocks. It is aimed at X5 owners experiencing failed torque distribution between the axles.\u003c\/p\u003e\u003ch2\u003eSigns that your transfer case needs replacing\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eMetallic noise from beneath the centre floor when changing direction\u003c\/li\u003e\n\u003cli\u003ePerceptible vibrations when cornering at low speed\u003c\/li\u003e\n\u003cli\u003e4x4 management warning light illuminated on the dashboard\u003c\/li\u003e\n\u003cli\u003eJolts or juddering during torque distribution between the axles\u003c\/li\u003e\n\u003cli\u003eLoss of traction on wet or snow-covered roads\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eFull reconditioning\u003c\/h2\u003e\u003cp\u003eEvery reconditioned transfer case is completely stripped down, cleaned and inspected part by part. Worn internal components – including gears, bearings and seals – are replaced according to their condition. The unit is then reassembled to manufacturer tolerances and bench-tested before dispatch.\u003c\/p\u003e\u003cp\u003eThis transfer case is sold without the associated electronics: this module is neither supplied nor included in the sale, it is neither reconditioned nor tested, and it remains the vehicle's original unit, to be reused by the customer.\u003c\/p\u003e\u003ch2\u003eExchange basis – no downtime\u003c\/h2\u003e\u003cp\u003eUnder the exchange scheme, the reconditioned transfer case reference ATC700 is dispatched before the old unit is collected. The garage is therefore never left without a part and the lift is not tied up waiting. The old unit, with its casing intact, is only collected after the reconditioned transfer case has been delivered and fitted; its return is required, in accordance with the Terms and Conditions.\u003c\/p\u003e\u003ch2\u003eCompatibility\u003c\/h2\u003e\u003cp\u003eThis ATC700 transfer case is suitable for BMW X5 3.0d models fitted with the M57D30 (306D1\/306D2), M57N2 (306D3) or N57D30 engine blocks, with an engine capacity of 2 993 cm³.\u003c\/p\u003e\u003ch2\u003eWarranty and payment\u003c\/h2\u003e\u003cp\u003eThis reconditioned transfer case reference ATC700 is covered by a 24-month parts warranty, subject to fitting by a qualified professional. Payment can be spread over several instalments, in up to 10 instalments.\u003c\/p\u003e\u003cp\u003eEDEN BOITES supports you from quote through to collection of the old unit.\u003c\/p\u003e","brand":"BMW","offers":[{"title":"Default Title","offer_id":42783478775893,"sku":"ATC700_TRANSFERT","price":1685.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0656\/9161\/5317\/files\/boite-de-transfert-echange-standard_0320982a-7121-40d6-8a2f-181debe476e4.png?v=1785228727"},{"product_id":"boite-de-transfert-land-rover-range-rover-evoque-2-2-td4-reconditionne-lr040657","title":"Reconditioned Land Rover Range Rover Evoque 2.2 TD4 Transfer Case – Transfer – Ref. LR040657","description":"\u003ch2\u003eReconditioned Land Rover Range Rover Evoque 2.2 TD4 Transfer Case – Reference LR040657\u003c\/h2\u003e\u003cp\u003eThis reconditioned transfer case for the Land Rover Range Rover Evoque 2.2 TD4 corresponds to reference LR040657 and is compatible with the 224DT engine of 2179 cm³. It is aimed at owners whose four-wheel-drive system is showing signs of weakness and who would rather have their own unit rebuilt than buy a new one – often more expensive and not always readily available. A prior diagnostic check will generally confirm the source of the fault before the unit is sent in.\u003c\/p\u003e\u003ch2\u003eSigns that your transfer case needs replacing\u003c\/h2\u003e\u003cp\u003eSeveral warning signs should prompt action: a dull thud or grinding noise when engaging off-road mode, juddering when torque is distributed between the axles, a four-wheel-drive warning light on the dashboard, or a loss of traction on slippery surfaces when the system should be compensating automatically. An unusual vibration felt through the floor – particularly when cornering tightly or manoeuvring at low speed – is also a tell-tale sign of advanced internal wear that warrants prompt attention.\u003c\/p\u003e\u003ch2\u003eYour unit rebuilt and ready to fit\u003c\/h2\u003e\u003cp\u003eWith this service, you send us your own transfer case rather than receiving an immediate replacement unit. It is fully stripped, cleaned and inspected; worn gears, bearings and internal seals are replaced; it is then reassembled to manufacturer tolerances and bench-tested before being returned to you, ready to fit to your vehicle. The service does not include the electronics: this component is neither reconditioned nor tested – it remains your vehicle's original unit and must be reused as-is during reassembly.\u003c\/p\u003e\u003ch2\u003eCompatibility\u003c\/h2\u003e\u003cp\u003eReference LR040657 applies to Land Rover Range Rover Evoque models fitted with the 2.2 TD4 engine, engine code 224DT, engine capacity 2179 cm³. Please verify that the reference matches the original transfer case on your vehicle before sending us your unit for rebuilding.\u003c\/p\u003e\u003ch2\u003eWarranty and payment\u003c\/h2\u003e\u003cp\u003eThe rebuild of this transfer case is covered by a 12-month parts warranty, valid subject to fitting being carried out by a qualified professional. Payment for the service can be spread over several instalments, in up to 10 instalments.\u003c\/p\u003e\u003cp\u003eEDEN BOITES supports you every step of the way, from the initial quote through to the return of your rebuilt unit.\u003c\/p\u003e\u003ch2\u003eCompatible vehicles (ref. LR040657)\u003c\/h2\u003e\u003cp\u003eThis reference also fits:\u003c\/p\u003e\u003cul\u003e\u003cli\u003e\u003ca href=\"\/en\/products\/boite-de-transfert-land-rover-freelander-2-2-td4-reconditionne-lr040657\"\u003eReconditioned Land Rover Freelander 2.2 TD4 Transfer Case – Transfer – Ref. LR040657\u003c\/a\u003e\u003c\/li\u003e\u003c\/ul\u003e","brand":"Land Rover","offers":[{"title":"Default Title","offer_id":42783478841429,"sku":"LR040657_TRANSFERT","price":2340.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0656\/9161\/5317\/files\/boite-de-transfert-echange-standard_ceedc084-9161-4402-b38b-6d59633255bc.png?v=1785229029"},{"product_id":"boite-de-transfert-mitsubishi-pajero-1-8-reconditionne-mr953713","title":"Reconditioned Mitsubishi Pajero 1.8 Transfer Case – Transfer – Ref. MR953713","description":"\u003ch2\u003eReconditioned Mitsubishi Pajero 1.8 Petrol Transfer Case – Reference MR953713\u003c\/h2\u003e\u003cp\u003eThis reconditioned transfer case for the Mitsubishi Pajero 1.8 Petrol, with the 4G93 engine (1834 cm³), corresponds to reference MR953713. It is offered as a rebuild of your own unit: you send us your original transfer case, which is fully rebuilt and then returned to you.\u003c\/p\u003e\u003ch2\u003eSigns that your transfer case needs replacing\u003c\/h2\u003e\u003cp\u003eSeveral warning signs should alert the owner of a Pajero fitted with this transfer case: difficulty engaging 4x4 mode or low range, a metallic noise or rumbling in 4L, juddering when switching between drive modes, vibrations felt through the vehicle while driving, or the four-wheel drive warning light illuminating on the dashboard. These symptoms generally indicate internal wear of the gears or bearings within the transfer case.\u003c\/p\u003e\u003ch2\u003eYour unit rebuilt and ready to fit\u003c\/h2\u003e\u003cp\u003eWith this service, you send us your own transfer case, reference MR953713. It is fully stripped, cleaned and inspected; worn internal components – including gears, bearings and seals – are replaced according to their condition; the unit is then reassembled to manufacturer tolerances and bench-tested before being returned to you. The electronics of this transfer case are not included in the service: they are neither reconditioned nor tested, and remain the vehicle's original electronics for the customer to reuse.\u003c\/p\u003e\u003ch2\u003eCompatibility\u003c\/h2\u003e\u003cp\u003eThis rebuilt transfer case is suitable for the Mitsubishi Pajero fitted with the 4G93 engine (1834 cm³), for reference MR953713.\u003c\/p\u003e\u003ch2\u003eWarranty and payment\u003c\/h2\u003e\u003cp\u003eThe transfer case rebuilt under this service comes with a 12-month parts warranty, subject to fitting by a qualified professional. Payment can be spread over several instalments, in up to 10 instalments.\u003c\/p\u003e\u003cp\u003eEDEN BOITES supports you from quote through to the return of your rebuilt unit.\u003c\/p\u003e","brand":"Mitsubishi","offers":[{"title":"Default Title","offer_id":42783478874197,"sku":"MR953713_TRANSFERT","price":1620.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0656\/9161\/5317\/files\/boite-de-transfert-echange-standard_e85512d9-d667-4ad8-a2a3-c4e45eefc179.png?v=1785229154"},{"product_id":"boite-de-transfert-kia-sorento-2-2-crdi-reconditionne-473003b210","title":"Reconditioned Kia Sorento 2.2 CRDi Transfer Case – Transfer – Ref. 473003B210","description":"\u003ch2\u003eReconditioned Kia Sorento 2.2 CRDi Transfer Case – Reference 473003B210\u003c\/h2\u003e\u003cp\u003eThis reconditioned transfer case for the Kia Sorento 2.2 CRDi (engine D4HB, engine capacity 2199 cm³) is supplied under reference 473003B210. Its role is to distribute torque to the rear axle when 4x4 mode is engaged on this diesel model. On the Sorento, the transfer case operates under constant heavy load – particularly during off-road use or in snowy conditions – which causes progressive wear to its gears and internal bearings. The reconditioning process involves a full strip-down of the transfer case, thorough cleaning and inspection of every component, replacement of all internal wear parts such as gears, bearings and seals, followed by reassembly to manufacturer tolerances and a bench test.\u003c\/p\u003e\u003ch2\u003eSigns That Your Transfer Case Needs Replacing\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eUnusual noise or grinding when engaging 4x4 mode\u003c\/li\u003e\n\u003cli\u003eVibrations felt through the floor on tight corners\u003c\/li\u003e\n\u003cli\u003eFour-wheel-drive warning light illuminated on the dashboard\u003c\/li\u003e\n\u003cli\u003eDifficulty or resistance when engaging the transfer\u003c\/li\u003e\n\u003cli\u003eVisible oil leak from the transfer case housing\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eRebuild of Your Own Unit – Ready to Fit\u003c\/h2\u003e\u003cp\u003eWith this service, you send us your own transfer case, reference 473003B210; it is fully rebuilt and bench-tested before being returned to you, ready to fit to your Kia Sorento 2.2 CRDi. It is your original unit, restored to working order, that comes back to you – this is not an exchange with a different transfer case. This service is aimed at both trade and private customers who wish to keep their own transfer case rather than opt for a different unit, particularly where the original configuration must be preserved. The service does not include the electronics associated with this transfer case; this component is neither reconditioned nor tested and remains the vehicle's original unit, to be refitted by you during reassembly.\u003c\/p\u003e\u003ch2\u003eCompatibility\u003c\/h2\u003e\u003cp\u003eReference 473003B210 applies to Kia Sorento models fitted with the D4HB engine in 2.2 CRDi specification, with an engine capacity of 2199 cm³.\u003c\/p\u003e\u003ch2\u003eWarranty and Payment\u003c\/h2\u003e\u003cp\u003eThis rebuilt transfer case is covered by a 12-month parts warranty, valid subject to fitting being carried out by a qualified professional. Payment for this service can be spread over several instalments, in up to 10 instalments.\u003c\/p\u003e\u003cp\u003eEDEN BOITES supports you from the initial quote through to the return of your rebuilt unit.\u003c\/p\u003e","brand":"Kia","offers":[{"title":"Default Title","offer_id":42783478906965,"sku":"473003B210_TRANSFERT","price":1740.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0656\/9161\/5317\/files\/boite-de-transfert-echange-standard_4b8142b3-3f5c-48e6-bc19-4656683000a4.png?v=1785229384"},{"product_id":"boite-de-transfert-ford-kuga-2-0-tdci-reconditionne-cv61-7l486-hh","title":"Reconditioned Ford Kuga 2.0 TDCi Transfer Case – Transfer – Ref. CV61-7L486-HH","description":"\u003ch2\u003eReconditioned Ford Kuga 2.0 TDCi Transfer Case\u003c\/h2\u003e\u003cp\u003eThis reconditioned transfer case for the Ford Kuga 2.0 TDCi (1997 cm³), reference CV61-7L486-HH, is compatible with vehicles fitted with the G6DG, UFDA, TXDA, UFWA, T7MA or T7MB engines. It distributes engine torque between the front and rear axles – a critical function on four-wheel-drive versions of the Kuga 2.0 TDCi. The reconditioning process involves complete disassembly, thorough cleaning and inspection of every component, replacement of internal wear parts such as bearings, gears and seals, followed by reassembly to manufacturer tolerances and bench testing.\u003c\/p\u003e\u003ch2\u003eSigns That Your Transfer Case Needs Replacing\u003c\/h2\u003e\u003cp\u003eOn a Kuga 2.0 TDCi, a worn transfer case typically makes itself known through a dull thud or grinding noise when engaging four-wheel-drive mode, juddering or vibrations through the drivetrain, the all-wheel-drive warning light illuminating on the dashboard, or a visible oil leak at the casing. Some drivers also report unusual resistance when turning on full lock, or a clunking noise at low speed – both indicative of excessive internal play. Uneven torque distribution between the axles, particularly noticeable on slippery surfaces, is another sign of advanced wear.\u003c\/p\u003e\u003ch2\u003eRebuilding Your Own Unit, Ready to Fit\u003c\/h2\u003e\u003cp\u003eWith this service, you send in your own CV61-7L486-HH transfer case; it is reconditioned to the process described above and returned to you ready to fit to your vehicle. This approach restores your original transfer case to its initial performance, retaining the unit specific to your Kuga. Please note that electronics are not included in this service: the electronic component is neither reconditioned nor tested – it remains the vehicle's original unit and must be refitted as-is by you during reassembly.\u003c\/p\u003e\u003ch2\u003eCompatibility\u003c\/h2\u003e\u003cp\u003eThis reconditioned transfer case is compatible with the G6DG, UFDA, TXDA, UFWA, T7MA and T7MB engines fitted to the Ford Kuga 2.0 TDCi. Please check that the reference CV61-7L486-HH appears on your original unit before sending it in, to confirm an exact match with your vehicle – several transfer case references may have been fitted depending on the trim level.\u003c\/p\u003e\u003ch2\u003eWarranty and Payment\u003c\/h2\u003e\u003cp\u003eThis reconditioned transfer case comes with a 12-month parts warranty, subject to fitting by a qualified professional. The warranty covers functional defects relating to the internal mechanical components replaced during reconditioning. Payment can be spread over multiple instalments, in up to 10 instalments.\u003c\/p\u003e\u003cp\u003eEDEN BOITES is with you every step of the way, from quote through to the return of your reconditioned unit.\u003c\/p\u003e","brand":"Ford","offers":[{"title":"Default Title","offer_id":42783478939733,"sku":"CV617L486HH_TRANSFERT","price":1795.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0656\/9161\/5317\/files\/boite-de-transfert-echange-standard_513abd0a-ef33-4001-9821-c098b0d839eb.png?v=1785229418"},{"product_id":"boite-de-transfert-audi-s3-2-0-tfsi-reconditionne-0av409053ae","title":"Reconditioned Audi S3 2.0 TFSI Transfer Case – Transfer – Ref. 0AV409053AE","description":"\u003ch2\u003eReconditioned Audi S3 2.0 TFSI Transfer Case – Reference 0AV409053AE\u003c\/h2\u003e\u003cp\u003eThis reconditioned transfer case for the Audi S3 2.0 TFSI (1984 cm³) is supplied under reference 0AV409053AE, compatible with engine codes CDLA, CDLB and CJXC. Reconditioning follows a rigorous process: complete disassembly of the casing, cleaning and inspection of every component, replacement of internal wear parts such as gears, bearings and seals, then reassembly to manufacturer tolerances and bench-testing prior to dispatch.\u003c\/p\u003e\u003ch2\u003eSigns That Your Transfer Case Needs Replacing\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eNoises or grinding under acceleration, particularly on tight corners\u003c\/li\u003e\n\u003cli\u003eVibrations felt inside the cabin during torque distribution changes\u003c\/li\u003e\n\u003cli\u003eFour-wheel-drive (quattro) warning light illuminated on the dashboard\u003c\/li\u003e\n\u003cli\u003eLoss of traction or unstable handling on slippery surfaces\u003c\/li\u003e\n\u003cli\u003eVisible oil leak at the transfer case housing\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eExchange Basis: Immediate Dispatch, Deferred Return\u003c\/h2\u003e\u003cp\u003eThis reconditioned transfer case is dispatched immediately, without waiting for the return of your old unit. Your vehicle is therefore never off the road and the axle remains available throughout. The old transfer case, with its casing intact, is only collected once the reconditioned unit has been delivered and fitted. Its return is nonetheless required, in accordance with our Terms and Conditions.\u003c\/p\u003e\u003cp\u003eThis transfer case is sold without the electronics: this component is neither supplied nor included in the sale, it is neither reconditioned nor tested, and remains the vehicle's original unit, to be reused by the customer.\u003c\/p\u003e\u003ch2\u003eCompatibility\u003c\/h2\u003e\u003cp\u003eReference 0AV409053AE is suitable for Audi S3 2.0 TFSI vehicles fitted with engine codes CDLA, CDLB or CJXC, with an engine capacity of 1984 cm³.\u003c\/p\u003e\u003ch2\u003eWarranty and Payment\u003c\/h2\u003e\u003cp\u003eThis reconditioned transfer case comes with a 12-month parts warranty, subject to fitting by a qualified professional. Payment can be spread over multiple instalments, in up to 10 instalments.\u003c\/p\u003e\u003cp\u003eEDEN BOITES supports you every step of the way, from your initial quote through to collection of the old unit.\u003c\/p\u003e","brand":"Audi","offers":[{"title":"Default Title","offer_id":42783478972501,"sku":"0AV409053AE_TRANSFERT","price":1695.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0656\/9161\/5317\/files\/boite-de-transfert-echange-standard_5912bf62-4da3-4076-8b98-d1af72d16c71.png?v=1785224954"},{"product_id":"boite-de-transfert-nissan-patrol-3-0-dci-reconditionne-33100vb000","title":"Reconditioned Nissan Patrol 3.0 dCi Transfer Case – Transfer – Ref. 33100VB000","description":"\u003ch2\u003eReconditioned Nissan Patrol 3.0 dCi Transfer Case – Reference 33100VB000\u003c\/h2\u003e\u003cp\u003eThis reconditioned transfer case for the Nissan Patrol 3.0 dCi is supplied under reference 33100VB000 and is compatible with vehicles fitted with the ZD30DDTi engine, with an engine capacity of 2953 cm³. The reconditioning process involves a full strip-down of the transfer case, thorough cleaning and inspection of every component, replacement of internal wear parts such as gears, bearings and seals, followed by reassembly to manufacturer tolerances and a bench test prior to dispatch.\u003c\/p\u003e\u003ch2\u003eSigns That Your Transfer Case Needs Replacing\u003c\/h2\u003e\u003cp\u003eOn a Nissan Patrol 3.0 dCi, several warning signs should alert the driver: a dull thud or grinding noise when switching between two-wheel and four-wheel drive modes, unusual vibrations felt inside the cabin while driving, the 4x4 warning light illuminating on the dashboard for no apparent reason, difficulty engaging or disengaging off-road mode, or a visible oil leak at the transfer case housing. These symptoms are often indicative of advanced internal wear within the transfer case.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eNoise or grinding when switching between 2WD\/4WD\u003c\/li\u003e\n\u003cli\u003eAbnormal vibrations while driving\u003c\/li\u003e\n\u003cli\u003e4x4 warning light on the dashboard\u003c\/li\u003e\n\u003cli\u003eDifficulty engaging off-road mode\u003c\/li\u003e\n\u003cli\u003eOil leak at the transfer case housing\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eExchange Basis – Old Unit Collected After Delivery\u003c\/h2\u003e\u003cp\u003eThis transfer case, reference 33100VB000, is sold on an exchange basis, rebuilt to 0 km. The reconditioned unit is dispatched first so that the garage is never left without a part and the vehicle is off the road for as short a time as possible. The old transfer case, with its housing intact, is only collected after delivery and fitting of the reconditioned unit; return of the old unit is required, in accordance with our Terms and Conditions.\u003c\/p\u003e\u003ch2\u003eWhat Is Not Included\u003c\/h2\u003e\u003cp\u003eThis transfer case is sold without the electronics: this component is neither reconditioned nor tested – it remains the vehicle's original unit and must be reused by the customer during fitting.\u003c\/p\u003e\u003ch2\u003eCompatibility\u003c\/h2\u003e\u003cp\u003eThis reconditioned transfer case, reference 33100VB000, is compatible with Nissan Patrol vehicles fitted with the ZD30DDTi engine (3.0 dCi, 2953 cm³).\u003c\/p\u003e\u003ch2\u003eWarranty and Payment\u003c\/h2\u003e\u003cp\u003eThis transfer case is covered by a 12-month parts warranty, subject to fitting being carried out by a qualified professional. Payment can be spread over several instalments, in up to 10 instalments.\u003c\/p\u003e\u003cp\u003eEDEN BOITES supports you from quote through to collection of the old unit.\u003c\/p\u003e","brand":"Nissan","offers":[{"title":"Default Title","offer_id":42783479005269,"sku":"33100VB000_TRANSFERT","price":1695.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0656\/9161\/5317\/files\/boite-de-transfert-echange-standard_f8a7e912-e02f-4114-82ad-e44c90136152.png?v=1785229456"},{"product_id":"boite-de-transfert-jeep-cherokee-2-2-crd-reconditionne-68307402aa","title":"Reconditioned Jeep Cherokee 2.2 CRD Transfer Case – Transfer – Ref. 68307402AA","description":"\u003ch2\u003eReconditioned Jeep Cherokee 2.2 CRD Transfer Case – Reference 68307402AA\u003c\/h2\u003e\u003cp\u003eThis reconditioned transfer case for the Jeep Cherokee 2.2 CRD (engine EBV, 2184 cm³) is supplied under reference 68307402AA, an essential component for the correct operation of this vehicle's four-wheel-drive system. The reconditioning process begins with a full strip-down, followed by thorough cleaning and a meticulous inspection of every internal component. Wear parts such as gears, synchros, bearings and seals are then replaced as required. The unit is reassembled to manufacturer tolerances and bench-tested before final sign-off, ensuring performance that meets original factory standards.\u003c\/p\u003e\u003ch2\u003eSigns That Your Transfer Case Needs Replacing\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eUnusual noise or rumbling when engaging 4x4 mode\u003c\/li\u003e\n\u003cli\u003eJuddering or jerking when engaging four-wheel drive\u003c\/li\u003e\n\u003cli\u003e4WD warning light permanently illuminated on the dashboard\u003c\/li\u003e\n\u003cli\u003eDifficulty or inability to engage four-wheel-drive mode\u003c\/li\u003e\n\u003cli\u003eVibrations felt through the floor whilst driving\u003c\/li\u003e\n\u003cli\u003eVisible oil leak from the transfer case housing\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eRebuild of Your Own Unit – Ready to Fit\u003c\/h2\u003e\u003cp\u003eWith this service, you send in your own transfer case: it is fully rebuilt, bench-tested and reassembled to manufacturer tolerances before being returned to you, ready to be refitted to your Jeep Cherokee. This transfer case, reference 68307402AA, is restored to performance that meets original factory standards, without using a replacement unit sourced from another vehicle.\u003c\/p\u003e\u003ch2\u003eExclusion\u003c\/h2\u003e\u003cp\u003eThe electronics are not included in this service: they are neither reconditioned nor tested as part of this work, and your vehicle's original electronics should be reused as-is during refitting.\u003c\/p\u003e\u003ch2\u003eCompatibility\u003c\/h2\u003e\u003cp\u003eThis reconditioned transfer case is suitable for Jeep Cherokee models fitted with the EBV engine in 2.2 CRD diesel specification, with an engine capacity of 2184 cm³.\u003c\/p\u003e\u003ch2\u003eWarranty and Payment\u003c\/h2\u003e\u003cp\u003eThis transfer case comes with a 12-month parts warranty, subject to fitting by a qualified professional. Payment for this service can be spread over multiple instalments, in up to 10 instalments, to help manage your budget.\u003c\/p\u003e\u003cp\u003eEDEN BOITES supports you from quote through to the return of your rebuilt unit.\u003c\/p\u003e","brand":"Jeep","offers":[{"title":"Default Title","offer_id":42783479038037,"sku":"68307402AA_TRANSFERT","price":2040.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0656\/9161\/5317\/files\/boite-de-transfert-echange-standard_a97635df-b627-45ff-8daa-66fa2df24449.png?v=1785230165"},{"product_id":"boite-de-transfert-bmw-serie-6-3-0d-reconditionne-atc35l","title":"Reconditioned BMW Série 6 3.0d Transfer Case – Transfer – Ref. ATC35L","description":"\u003ch2\u003eReconditioned BMW Série 6 3.0d Transfer Case – Ref. ATC35L\u003c\/h2\u003e\u003cp\u003eThis reconditioned transfer case for the BMW Série 6 3.0d, compatible with N57D30A and N57D30B engines of 2993 cm³, is supplied under reference ATC35L. It is fully stripped, cleaned and inspected; internal wear components such as bearings and seals are replaced as required, before the unit is reassembled to manufacturer tolerances and bench-tested prior to dispatch. This process restores reliable torque transfer between the axles without any intervention on the associated electronic components.\u003c\/p\u003e\u003ch2\u003eSigns that your transfer case needs replacing\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eUnusual noise or grinding when engaging four-wheel drive mode\u003c\/li\u003e\n\u003cli\u003eVibrations felt through the floor or from the rear transmission\u003c\/li\u003e\n\u003cli\u003e4x4 system warning light illuminated on the dashboard\u003c\/li\u003e\n\u003cli\u003eLoss of traction or locking of torque transfer between the axles\u003c\/li\u003e\n\u003cli\u003eOil leak from the transfer case housing\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eExchange basis – delivered before return of the old unit\u003c\/h2\u003e\u003cp\u003eThis ATC35L transfer case is sold on an exchange basis: the reconditioned unit is dispatched to you first, before any return of the old unit is required. The original housing, provided it is intact, is only collected after delivery and fitting of the new transfer case by your garage, so the vehicle is never left off the road and the axle is never left immobilised. Return of the old transfer case is required in accordance with our Terms and Conditions.\u003c\/p\u003e\u003cp\u003eThis transfer case is sold without the associated electronics: this component is neither supplied nor included in the sale, it is neither reconditioned nor tested, and remains the vehicle's original unit, to be reused by the customer during fitting.\u003c\/p\u003e\u003ch2\u003eCompatibility\u003c\/h2\u003e\u003cp\u003eReference ATC35L is suitable for BMW Série 6 3.0d vehicles fitted with N57D30A and N57D30B engines, with an engine capacity of 2993 cm³. Please verify the ATC35L reference for your vehicle before ordering to ensure compatibility.\u003c\/p\u003e\u003ch2\u003eWarranty and payment\u003c\/h2\u003e\u003cp\u003eThis reconditioned transfer case comes with a 24-month parts warranty, valid subject to fitting by a qualified professional. Payment can be spread over multiple instalments, in up to 10 instalments.\u003c\/p\u003e\u003cp\u003eEDEN BOITES supports you from quote through to collection of the old unit.\u003c\/p\u003e\u003ch2\u003eCompatible vehicles (ref. ATC35L)\u003c\/h2\u003e\u003cp\u003eThis reference also fits:\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\u003ca href=\"\/en\/products\/boite-de-transfert-bmw-serie-3-3-0d-reconditionne-atc35l\"\u003eReconditioned BMW Série 3 3.0d Transfer Case – Transfer – Ref. ATC35L\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/en\/products\/boite-de-transfert-bmw-serie-5-3-0d-reconditionne-atc35l\"\u003eReconditioned BMW Série 5 3.0d Transfer Case – Transfer – Ref. ATC35L\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/en\/products\/boite-de-transfert-bmw-serie-7-3-0i-reconditionne-atc35l\"\u003eReconditioned BMW Série 7 3.0i Transfer Case – Transfer – Ref. ATC35L\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/en\/products\/boite-de-transfert-bmw-serie-4-3-0i-reconditionne-atc35l\"\u003eReconditioned BMW Série 4 3.0i Transfer Case – Transfer – Ref. ATC35L\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"BMW","offers":[{"title":"Default Title","offer_id":42783479070805,"sku":"ATC35L_TRANSFERT","price":1680.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0656\/9161\/5317\/files\/boite-de-transfert-echange-standard_de0f43fc-6c9b-4776-9d11-a4e1696ff182.png?v=1785228126"},{"product_id":"boite-de-transfert-mercedes-ml300-3-0-cdi-reconditionne-a2512801200","title":"Reconditioned Mercedes ML300 3.0 CDI Transfer Case – Transfer – Ref. A2512801200","description":"\u003ch2\u003eReconditioned Mercedes ML300 3.0 CDI Transfer Case – Reference A2512801200\u003c\/h2\u003e\u003cp\u003eThe reconditioned transfer case for the Mercedes ML300 3.0 CDI, reference A2512801200, restores the vehicle's four-wheel-drive system to its original behaviour. Compatible with OM642.940 engines of 2987 cm³, this fully rebuilt transfer case is returned to its original specifications following a thorough inspection.\u003c\/p\u003e\u003cp\u003eThe reconditioning process follows a precise procedure: the unit is completely stripped, cleaned and inspected part by part; gears, bearings and seals are replaced; the assembly is then rebuilt to manufacturer tolerances and bench-tested before dispatch.\u003c\/p\u003e\u003ch2\u003eSigns That Your Transfer Case Needs Replacing\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eGrinding or scraping noise from the floor area during manoeuvres\u003c\/li\u003e\n\u003cli\u003eFour-wheel-drive warning light illuminated on the dashboard\u003c\/li\u003e\n\u003cli\u003eJuddering or jerking when switching between drive modes\u003c\/li\u003e\n\u003cli\u003eUnusual vibrations from beneath the vehicle under acceleration\u003c\/li\u003e\n\u003cli\u003eVisible oil leak from the transfer case housing\u003c\/li\u003e\n\u003cli\u003eRefusal or seizure when engaging off-road mode\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eCompatibility\u003c\/h2\u003e\u003cp\u003eThis reconditioned transfer case, reference A2512801200, is compatible with Mercedes ML300 3.0 CDI vehicles fitted with the OM642.940 engine, with an engine capacity of 2987 cm³.\u003c\/p\u003e\u003ch2\u003eExchange Basis – Delivered Before Return of the Old Unit\u003c\/h2\u003e\u003cp\u003eUnder this exchange arrangement, the reconditioned transfer case reference A2512801200 is dispatched first, before the old unit is collected. The original housing, intact, is only recovered after delivery and installation of the new transfer case, so the garage is never left without a part to work with. Return of the old unit is required, in accordance with our Terms and Conditions.\u003c\/p\u003e\u003cp\u003eThis transfer case is sold without the electronics: this module is not supplied or included in the sale, it is neither reconditioned nor tested, and it remains the vehicle's original unit, to be reused by the customer.\u003c\/p\u003e\u003ch2\u003eWarranty and Payment\u003c\/h2\u003e\u003cp\u003eThis reconditioned transfer case is covered by a 24-month parts warranty, subject to fitting by a qualified professional. Payment can be spread over multiple instalments, in up to 10 instalments.\u003c\/p\u003e\u003cp\u003eEDEN BOITES supports you from quote through to collection of the old unit.\u003c\/p\u003e","brand":"Mercedes","offers":[{"title":"Default Title","offer_id":42783479103573,"sku":"A2512801200_TRANSFERT","price":1795.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0656\/9161\/5317\/files\/boite-de-transfert-echange-standard_1807814f-f04a-4289-86d1-af77bfbeb5af.png?v=1785230221"},{"product_id":"boite-de-transfert-isuzu-d-max-3-0-ddi-reconditionne-8980287650","title":"Reconditioned Isuzu D-Max 3.0 DDi Transfer Case – Transfer – Ref. 8980287650","description":"\u003ch2\u003eReconditioned Isuzu D-Max 3.0 DDi Transfer Case – Reference 8980287650\u003c\/h2\u003e\u003cp\u003eThis service covers the full rebuild of your own Isuzu D-Max 3.0 DDi transfer case – a 2999 cm³ diesel unit compatible with the 4JJ1 and 4JJ3 engines – under reference 8980287650. Rather than being replaced with an off-the-shelf unit, your original transfer case is sent to us and completely restored.\u003c\/p\u003e\u003ch2\u003eSigns That Your Transfer Case Needs Reconditioning\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eRumbling or grinding noise when switching between two-wheel drive and four-wheel drive\u003c\/li\u003e\n\u003cli\u003eFailure to engage 4x4 mode or low range\u003c\/li\u003e\n\u003cli\u003eVibrations felt through the drivetrain during off-road driving\u003c\/li\u003e\n\u003cli\u003e4x4 warning light permanently illuminated on the dashboard\u003c\/li\u003e\n\u003cli\u003eVisible oil leak from the transfer case housing\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eYour Unit Rebuilt and Ready to Fit\u003c\/h2\u003e\u003cp\u003eAs part of this service, your Isuzu D-Max 3.0 DDi transfer case, reference 8980287650, is fully stripped, cleaned and inspected. Gears, bearings and seals are replaced as required, and the unit is then completely rebuilt to manufacturer tolerances and bench-tested before being returned to you. The service does not include the electronics: these remain your vehicle's original components, to be reused as they are, as they are neither reconditioned nor tested.\u003c\/p\u003e\u003ch2\u003eCompatibility\u003c\/h2\u003e\u003cp\u003eThis rebuild service applies to Isuzu D-Max transfer cases fitted with the 4JJ1 and 4JJ3 engines, 3.0 DDi 2999 cm³ diesel, under reference 8980287650.\u003c\/p\u003e\u003ch2\u003eWarranty and Payment\u003c\/h2\u003e\u003cp\u003eOnce rebuilt, your transfer case benefits from a 12-month parts warranty, valid subject to fitting by a qualified professional. Payment for this service can be spread over several instalments, up to ten.\u003c\/p\u003e\u003cp\u003eEDEN BOITES supports you from the initial quote through to the return of your rebuilt unit.\u003c\/p\u003e","brand":"Isuzu","offers":[{"title":"Default Title","offer_id":42783479136341,"sku":"8980287650_TRANSFERT","price":2195.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0656\/9161\/5317\/files\/boite-de-transfert-echange-standard_9dc3c43f-e059-4760-9a0f-716fbacfa7b7.png?v=1785230252"},{"product_id":"boite-de-transfert-land-rover-freelander-2-2-td4-reconditionne-lr040657","title":"Reconditioned Land Rover Freelander 2.2 TD4 Transfer Case – Transfer – Ref. LR040657","description":"\u003ch2\u003eReconditioned Land Rover Freelander 2.2 TD4 Transfer Case – Reference LR040657\u003c\/h2\u003e\u003cp\u003eThis reconditioned transfer case is available for Land Rover Freelander models fitted with the 2.2 TD4 engine, a 2179 cm³ diesel unit, and corresponds to reference LR040657. The reconditioning process involves a full strip-down, thorough cleaning and inspection of every component, replacement of internal wear parts such as gears, bearings and seals, followed by reassembly to manufacturer tolerances and a bench test prior to dispatch.\u003c\/p\u003e\u003ch2\u003eSigns that your transfer case needs replacing\u003c\/h2\u003e\u003cp\u003eOn a Freelander 2.2 TD4, several symptoms point to a worn transfer case: an audible grinding noise on tight corners, vibrations when four-wheel drive is engaged, resistance or a jolt when switching between drive modes, a visible oil leak at the casing, or the all-wheel-drive warning light illuminating on the dashboard.\u003c\/p\u003e\u003ch2\u003eRebuild of your own unit, ready to fit\u003c\/h2\u003e\u003cp\u003eWith this service, you send in your own transfer case bearing reference LR040657: it is fully rebuilt, bench-tested, reassembled to manufacturer tolerances, and then returned to you. The service does not include the electronics associated with this transfer case: this element is neither reconditioned nor tested — it remains the vehicle's original unit and is to be reused by you.\u003c\/p\u003e\u003ch2\u003eCompatibility\u003c\/h2\u003e\u003cp\u003eThis reconditioned transfer case, reference LR040657, is compatible with engines identified by codes 224DT and DW12BTED4, with an engine capacity of 2179 cm³.\u003c\/p\u003e\u003ch2\u003eWarranty and payment\u003c\/h2\u003e\u003cp\u003eA 12-month parts warranty applies, subject to fitting being carried out by a qualified professional. Payment can be spread over several instalments, in up to 10 instalments.\u003c\/p\u003e\u003cp\u003eEDEN BOITES supports you from quote through to the return of your rebuilt unit.\u003c\/p\u003e\u003ch2\u003eCompatible vehicles (ref. LR040657)\u003c\/h2\u003e\u003cp\u003eThis reference also fits:\u003c\/p\u003e\u003cul\u003e\u003cli\u003e\u003ca href=\"\/en\/products\/boite-de-transfert-land-rover-range-rover-evoque-2-2-td4-reconditionne-lr040657\"\u003eReconditioned Land Rover Range Rover Evoque 2.2 TD4 Transfer Case – Transfer – Ref. LR040657\u003c\/a\u003e\u003c\/li\u003e\u003c\/ul\u003e","brand":"Land Rover","offers":[{"title":"Default Title","offer_id":42783479169109,"sku":"LR040657_TRANSFERT","price":2340.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0656\/9161\/5317\/files\/boite-de-transfert-echange-standard_f85a9e1d-9884-40ef-9ffb-5616516f3d70.png?v=1785229028"},{"product_id":"boite-de-transfert-bmw-serie-4-3-0i-reconditionne-atc35l","title":"Reconditioned BMW Série 4 3.0i Transfer Case – Transfer – Ref. ATC35L","description":"\u003ch2\u003eReconditioned BMW Série 4 3.0i Transfer Case – Ref. ATC35L\u003c\/h2\u003e\u003cp\u003eThis reconditioned transfer case is designed for BMW Série 4 models fitted with the 3.0i petrol engine (2998 cm³), compatible with engine codes N55B30A and B58B30A, under reference ATC35L. It restores reliable torque distribution between the axles without starting from a faulty original unit.\u003c\/p\u003e\u003ch2\u003eSigns that your transfer case needs replacing\u003c\/h2\u003e\u003cp\u003eSeveral symptoms indicate wear on the transfer case of a BMW Série 4 3.0i:\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eMetallic noises or grinding from beneath the floor when switching drive modes;\u003c\/li\u003e\n\u003cli\u003eVibrations felt in the cabin at a steady speed;\u003c\/li\u003e\n\u003cli\u003eAll-wheel-drive system warning light illuminating on the dashboard;\u003c\/li\u003e\n\u003cli\u003eJolts or juddering when torque is distributed between the axles;\u003c\/li\u003e\n\u003cli\u003eVisible oil leak beneath the transfer case housing.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eExchange basis: a transfer case dispatched straight away\u003c\/h2\u003e\u003cp\u003eThis transfer case is sold on an exchange basis: the reconditioned unit is dispatched before the old unit is returned. The garage is therefore never left without a part, and the vehicle is not kept off the road while waiting. The old transfer case, provided the casing is intact, is only collected after the replacement unit has been delivered and fitted. Return of the old unit is required, in accordance with our Terms and Conditions.\u003c\/p\u003e\u003cp\u003eReconditioning involves a full strip-down of the transfer case, followed by cleaning and inspection of every component. Internal wear parts – including gears, bearings and seals – are replaced. The transfer case is then reassembled to manufacturer tolerances and bench-tested before dispatch.\u003c\/p\u003e\u003cp\u003eThis transfer case is sold without the associated electronics: that module remains the vehicle's original unit, is neither reconditioned nor tested as part of this sale, and must be reused by the customer on the unit received.\u003c\/p\u003e\u003ch2\u003eCompatibility\u003c\/h2\u003e\u003cp\u003eThis transfer case, referenced ATC35L, is compatible with BMW Série 4 models fitted with the 3.0i petrol engine, associated with engine codes N55B30A and B58B30A.\u003c\/p\u003e\u003ch2\u003eWarranty and payment\u003c\/h2\u003e\u003cp\u003eThis transfer case is covered by a 24-month parts warranty, subject to fitting by a qualified professional. Payment for this transfer case, referenced ATC35L, can be spread over several instalments – pay in up to 10 instalments.\u003c\/p\u003e\u003cp\u003eEDEN BOITES supports you from quote through to collection of the old unit.\u003c\/p\u003e\u003ch2\u003eCompatible vehicles (ref. ATC35L)\u003c\/h2\u003e\u003cp\u003eThis reference also fits:\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\u003ca href=\"\/en\/products\/boite-de-transfert-bmw-serie-3-3-0d-reconditionne-atc35l\"\u003eReconditioned BMW Série 3 3.0d Transfer Case – Transfer – Ref. ATC35L\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/en\/products\/boite-de-transfert-bmw-serie-5-3-0d-reconditionne-atc35l\"\u003eReconditioned BMW Série 5 3.0d Transfer Case – Transfer – Ref. ATC35L\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/en\/products\/boite-de-transfert-bmw-serie-7-3-0i-reconditionne-atc35l\"\u003eReconditioned BMW Série 7 3.0i Transfer Case – Transfer – Ref. ATC35L\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/en\/products\/boite-de-transfert-bmw-serie-6-3-0d-reconditionne-atc35l\"\u003eReconditioned BMW Série 6 3.0d Transfer Case – Transfer – Ref. ATC35L\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"BMW","offers":[{"title":"Default Title","offer_id":42783479201877,"sku":"ATC35L_TRANSFERT","price":1680.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0656\/9161\/5317\/files\/boite-de-transfert-echange-standard_de00c685-cd50-454a-9ee7-66be8aae67af.png?v=1785228129"},{"product_id":"boite-de-transfert-hyundai-terracan-2-9-crdi-reconditionne-47000h1060","title":"Reconditioned Hyundai Terracan 2.9 CRDi Transfer Case – Transfer Case – Ref. 47000H1060","description":"\u003ch2\u003eReconditioned Hyundai Terracan 2.9 CRDi Transfer Case – Ref. 47000H1060\u003c\/h2\u003e\u003cp\u003eThe reconditioned transfer case for the Hyundai Terracan 2.9 CRDi restores your own unit, reference 47000H1060, to its original specification. This transfer case fits vehicles equipped with the J3 (J3 CRDi) engine, with an engine capacity of 2902 cm³. The reconditioning process involves fully stripping the transfer case, cleaning and inspecting every component, replacing internal wear parts such as gears, bearings and seals, and then reassembling the unit to manufacturer tolerances before a bench test.\u003c\/p\u003e\u003ch2\u003eSigns that your transfer case needs replacing\u003c\/h2\u003e\u003cp\u003eSeveral warning signs indicate wear on your Terracan's transfer case: a grinding or clunking noise when engaging four-wheel drive, noticeable vibrations through the drivetrain at low speed, difficulty or seizure when engaging 4x4, the all-wheel-drive warning light illuminated on the dashboard, or a visible oil leak from the transfer case housing.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eGrinding or clunking noise in four-wheel-drive mode\u003c\/li\u003e\n\u003cli\u003eVibrations through the drivetrain at low speed\u003c\/li\u003e\n\u003cli\u003eSeizure or difficulty when engaging 4x4\u003c\/li\u003e\n\u003cli\u003eAll-wheel-drive warning light illuminated\u003c\/li\u003e\n\u003cli\u003eOil leak from the transfer case housing\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eYour own unit rebuilt and ready to fit\u003c\/h2\u003e\u003cp\u003eWith this service, you send us your own transfer case, reference 47000H1060, which is fully rebuilt, bench-tested and reassembled to manufacturer tolerances before being returned to you. This is not a replacement with another unit: it is your original transfer case that comes back to you, fully restored. The service does not include the electronics, which are neither reconditioned nor tested and remain the original electronics from your vehicle, to be refitted by you during reassembly.\u003c\/p\u003e\u003ch2\u003eCompatibility\u003c\/h2\u003e\u003cp\u003eThis transfer case, reference 47000H1060, is compatible with the Hyundai Terracan 2.9 CRDi fitted with the J3 (J3 CRDi) engine, with an engine capacity of 2902 cm³.\u003c\/p\u003e\u003ch2\u003eWarranty and payment\u003c\/h2\u003e\u003cp\u003eThe rebuild of your Terracan transfer case is covered by a 12-month parts warranty, subject to fitting being carried out by a qualified professional. Payment for this service can be spread over several instalments, up to 10 instalments.\u003c\/p\u003e\u003cp\u003eEDEN BOITES supports you from quote through to the return of your rebuilt unit.\u003c\/p\u003e","brand":"Hyundai","offers":[{"title":"Default Title","offer_id":42783479234645,"sku":"47000H1060_TRANSFERT","price":2340.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0656\/9161\/5317\/files\/boite-de-transfert-echange-standard_f0738cb6-e01f-4a72-a06c-48b40dba8fde.png?v=1785230351"},{"product_id":"boite-de-transfert-hyundai-santa-fe-2-0-crdi-reconstruit-4730039000","title":"Reconditioned Hyundai Santa Fe 2.0 CRDi Transfer Case – Transfer – Ref. 4730039000","description":"\u003ch2\u003eReconditioned Hyundai Santa Fe 2.0 CRDi Transfer Case – Reference 4730039000\u003c\/h2\u003e\u003cp\u003eThis reconditioned transfer case for the Hyundai Santa Fe 2.0 CRDi, fitted with the D4EA engine of 1991 cm³, is offered under reference 4730039000 as a rebuild service for your own unit. This component distributes engine torque between the front and rear axles on four-wheel-drive variants, playing a critical role in traction and vehicle stability. The reconditioning process involves a full strip-down of the transfer case, thorough cleaning and inspection of every part, replacement of internal wear items such as gears, bearings and seals, followed by reassembly to manufacturer tolerances and bench testing.\u003c\/p\u003e\u003ch2\u003eSigns That Your Transfer Case Needs Replacing\u003c\/h2\u003e\u003cp\u003eOn a Santa Fe fitted with the 2.0 CRDi, certain warning signs should not be ignored: a dull noise or grinding from the torque splitter, vibrations felt when engaging four-wheel-drive mode, the 4WD warning light illuminated on the dashboard, difficulty engaging or disengaging four-wheel drive, uneven tyre wear caused by poor torque distribution, or a visible oil leak beneath the casing. These symptoms generally indicate advanced internal wear requiring attention to reference 4730039000.\u003c\/p\u003e\u003ch2\u003eYour Unit Rebuilt and Ready to Fit\u003c\/h2\u003e\u003cp\u003eWith this service, you send in your own transfer case: it is fully reconditioned following the process described above, then returned to you ready to be refitted to your vehicle. This solution restores your original unit to near-new performance whilst retaining full traceability of your original transfer case. The service does not include the transfer case electronics: this component is neither reconditioned nor tested and remains your vehicle's original unit, to be reused by your installer.\u003c\/p\u003e\u003ch2\u003eCompatibility\u003c\/h2\u003e\u003cp\u003eThis service applies to the transfer case fitted to Hyundai Santa Fe models equipped with the D4EA engine in 2.0 CRDi form, with an engine capacity of 1991 cm³.\u003c\/p\u003e\u003ch2\u003eWarranty and Payment\u003c\/h2\u003e\u003cp\u003eThis rebuilt transfer case comes with a 12-month parts warranty, valid subject to fitting by a qualified professional. Payment can be spread over several instalments, in up to 10 instalments.\u003c\/p\u003e\u003cp\u003eEDEN BOITES supports you from the initial quote through to the return of your rebuilt unit.\u003c\/p\u003e","brand":"Hyundai","offers":[{"title":"Default Title","offer_id":42860719341653,"sku":"4730039000_TRANSFERT","price":2340.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0656\/9161\/5317\/files\/boite-de-transfert-echange-standard_2c09dabc-89c7-497d-974e-f64598d94e84.png?v=1786483196"}],"url":"https:\/\/eden-boites.com\/en\/collections\/reconditioned-transfer-cases.oembed","provider":"EDEN BOITES","version":"1.0","type":"link"}