All about Audi SQ2 gearboxes

The S-Tronic gearbox is an automatic automatic gearbox designed to deliver smooth, rapid gear changes. Its dual-clutch transmission system enables uninterrupted without torque interruption..

Each of the two clutches controls a group of gears: even gears for the first clutch, and odd gears for the second. In this way, each shift is prepared in advance and takes place instantaneously, thus avoiding jerks or dead time and reducing the risk of stalling.

The S-Tronic automatic gearbox contributes to the Audi SQ2's excellent performance. The 7 gears ensure comfortable driving at a wide range of speeds, and excellent fuel economy at high speeds.

Last but not least, the shift lever on the S-Tronic automatic gearbox lets you manual gearbox mode by simply using the simply by using the paddles on the steering wheel.

How do you maintain your Audi SQ2 gearbox? 

To keep your Audi SQ2 gearbox in good working order, you should regularly check the transmission oil. It's important to keep it at the recommended at the level recommended by the manufacturer and free from dirt. If you need to add oil, make sure you use the right product.

In addition, the automatic gearbox must be regularly automatic transmission of your Audi SQ2. Depending on whether you're driving in the city or on the freeway, this will take place every 60,000 to 80,000 km.

Finally, there are a few best practices to keep in mind. For example, always remember to switch to manual mode when towing a heavy load like a caravan or trailer.

Audi SQ2 gearbox malfunction detection

Even with proper maintenance, the S-Tronic automatic gearbox in your Audi SQ2 is prone to problems. These appear either withwear and tearor after a shock to the vehicle. There are several signs that a malfunction may have occurred:

• squeaking automatic transmission;
• unusual noises (such as metallic sounds or whistling);
• sensation of vibration orjerks ;
• feeling of skating ;
• gear shifting difficulty ;
• smell of burnt ;
• oil leak oil leakage.

If you experience any of these symptoms, don't hesitate to consult your mechanic or take a look at your gearbox yourself.

Some tips for repairing the Audi SQ2 gearbox

The repairing a gearbox is complex. The slightest error can lead to further failures, or even to complete stoppage or premature wear. The best solution is to to entrust this task to your garage who will give you the benefit of his expertise.

Nevertheless, you would like to repair your Audi SQ2 automatic gearbox yourself ? If so, be sure to ensure your safety by securing your vehicle in an upright position using stanchions. Then remove any obstructions blocking your access to the gearbox.

You can then disconnect all components noting the location of the various connections, then remove the gearbox. Finally, look for traces of wear or fluid leaks from the seals. Once you've located the faulty component, replace it with a new one.

If the operation is too difficult, take your car to a qualified garage to ensure a reliable long-lasting repair !

When to replace the entire Audi SQ2 gearbox?

In the event of general wear, repeated problems or major impact damage, it may be necessary to replace your your Audi SQ2 gearbox.. Here, too, professional advice is strongly recommended.

However, this leaves you with the option of purchase the new gearbox for your Audi SQ2 yourself. This way, you'll be able to find the best-priced equipment, and reduce your final cost.

Visit theEDEN BOITESyour trusted partner for gearbox supplies! We offer a wide range of Audi gearboxes Just check your original model number. Then ask us for a free, no-obligation quotation which will include the price of the gearbox and delivery charges.

Finally, don't forget to prepare your old gearbox for delivery, and we'll take care of its recovery!