Lancia Ypsilon: Managing gearbox failures

The Lancia Ypsilon enters its third generation in 2024 under the aegis of Stellantis, and benefits from a strong influence from the Peugeot 208 produced by this group.

The Lancia Ypsilon gearbox is designed to last the life of the vehicle, but unfortunately you're not immune to breakdowns: EDEN BOITES will help you repair it.

How to recognize a Lancia Ypsilon gearbox failure?

Ypsilon gearbox features

From launch, the Lancia Ypsilon is available with either a diesel or petrol engine. The five-speed manual gearbox is available on all first-generation models. On the 1.3 JTD Multijet Argento or the 1.3 JTD Platino, it can be replaced by Lancia's signature DFN robotized gearbox. The latter has the advantage of offering semi-automatic or fully automatic mode, depending on the driving mood of the moment.

Transmission is by front-wheel drive .

Signs of gearbox failure

Signs of failure of the Ypsilon gearbox may be as follows:

• Whistling sounds indicate a lack of gearbox oil or worn bearings;
• Clattering is the result of a mechanical malfunction caused by excessive play between gearbox parts;
• Squeaking noises indicate deterioration of synchronizers or sprockets;
• Cracking sounds may indicate damage to the synchronizer rings;
• Resistance to shifting is usually due to incorrectly adjusted control cables, deterioration of shift forks, clutch problems or premature wear of synchronizers;
• When the vehicle seems to skip a gear, the sprockets are not locking properly due to wear or a mechanical problem.

How to repair the Lancia Ypsilon gearbox?

Change gearbox oil

Transmission oil is a lubricant that helps prevent friction between the parts that make up the gearbox. Insufficient or damaged oil levels lead to premature wear and, in the long term, irreversible damage to the transmission system. 

The oil change is recommended every 60,000 kilometers for the automatic gearbox, and from 250,000 kilometers for the manual version. However, if you hear unusual noises when shifting gears or starting the engine, it may be advisable to change the oil earlier than planned.

Changing gearbox oil is more complicated than changing engine oil. It requires sound technical knowledge and the right tools. To do so, you must first identify the oil recommended by Lancia for your Ypsilon model. 

To change the oil, first raise the car flat, position the drip tray under the crankcase, unscrew the drain plug and allow the oil to drain into the tray. Next, locate the filler plug, usually on the top or side of the crankcase, and position the hose topped by a funnel to fill the tank with new gearbox oil.

Ask for expert advice

If you have the slightest doubt about a fault with your Ypsilon gearbox, don't delay in contacting a mechanic, who will be able to identify the problem and make a precise diagnosis. Don't hesitate to describe any symptoms you may have observed when shifting gears or driving: this information will help the expert in his research.

The solution EDEN BOITES

Your mechanic confirms that your Lancia Ypsilon gearbox needs to be completely replaced, but his estimate is higher than you had imagined: you can buy a new gearbox on your own and have it installed by your mechanic. 

Are you looking for a top-quality item without breaking the bank? EDEN BOITES has the solution: we offer refurbished boxes from our specialists at attractive prices. Each product has undergone a series of quality controls , after being meticulously dismantled, cleaned and defective parts replaced. In fact, all our boxes come with a one-year warranty!

If you'd like to replace your old Lancia Ypsilon 1.2 petrol gearbox, take the reference number engraved on it and check that it matches the gearbox code of the product you've selected online.

Is the gearbox you're looking for out of stock? Don't panic! EDEN BOITES can recondition your own gearbox.

Don't hesitate: request a online quote and we'll get back to you as soon as possible!