The Fiat Panda Cross is a more sophisticated version of the PANDA 4×4. In addition to all-wheel drive and differential lock, it features a "Terrain Control" selector allowing you to choose between three driving modes depending on the terrain:
Impeccable service
Gearbox broken? We help you identify and order your model
with "on-demand" all-wheel drive and electronic differential lock as standard. Just the thing for urban explorers!
In principle, the reliability of this vehicle is rarely called into question. However, wear and tear or lack of maintenance can lead to multiple breakdowns. In this article, EDEN BOITES explains how to repair the gearbox of a Fiat Panda Cross, based on the signs of malfunction.
What's new in Fiat Panda Cross gearboxes?
Both rustic and resolutely robust, the first generation of the Fiat Panda was marketed from 1980 to 2003, before giving way to a more contemporary model. The latest CROSS version has been available since 2012, and is largely inspired by its predecessor. Its profile remains slightly cubic, with rounded corners.
From 1981 to 1986, Fiat equipped its Panda model with a BVM4. The evolution of the various engines developed by the brand led to the introduction of the 4×4 version. The Fiat Panda Cross gearbox featured a 6-speed system, including a short first gear.
This distinguishes the Cross from the Fiat Panda 0.9 turbo petrol, Fiat Panda 1.1 petrol, Fiat Panda 1.2 petrol and Fiat Panda II 1.2 petrol. Part numbers may vary from one model to another. In case of doubt, EDEN BOITES will be happy to help you.
How can you spot the signs of failure?
Operation of the Fiat Panda Cross 0.9 turbo petrol 4×4 gearbox is as simple as it gets. You press the clutch pedal to disengage the flywheel from the system, then, thanks to the linkage mechanism, you activate a new gear.
However, there are many parts that operate this device, and the malfunction of any one of them can lead to breakdowns of varying degrees of seriousness. Pay close attention to your vehicle's behavior and take note of anything unusual:
- The noisy gearbox;
- Reports that don't make the cut;
- A warning light that stays on on the dashboard;
- A squeak at every gear change;
- A smell of burning.
If you notice one or more of these signs, schedule a repair as soon as possible.
How to recondition the Fiat Panda Cross gearbox?
First, inspect the oil level. Too low a level can compromise :
- lubrication;
- heat dissipation;
- internal pressure;
- cleanliness of the transmission system.
It's crucial to follow the manufacturer's maintenance recommendations and carry out regular checks to avoid these problems.
If there's no sign of leakage or problems with the crankcase, make an appointment to see a qualified professional. Then explain what you've found and how long the problem has been there.
Your driving style may be the cause of the breakdown (aggressive acceleration, driving on unsuitable terrain, etc.). Finally, ask yourself how regularly your car is serviced.
All these details will be important for the essential diagnostic tests. The repairer will then visually inspect the components and check their state of wear. This will enable him to assess the need for gearbox removal. This is a particularly delicate process. The order in which fasteners and parts are removed must be scrupulously respected.
Should I replace my Fiat Panda Cross gearbox?
In some cases, the problem is too serious to be repaired. In such cases, your mechanic may suggest replacing or reconditioning your Fiat Panda Cross gearbox. These solutions are costly, but guarantee long-term reliability.
EDEN BOITES has a large stock of gearboxes, withused and exchange models all guaranteed. You can also opt for the reconditioning of your Fiat Panda Cross gearbox. It will be refurbished to 0 km before being shipped back to you.
A significanteconomic advantage: by having the gearbox delivered direct to you, you avoid the garage's commission charges. All the mechanic has to do is dismantle the gearbox so that it can be picked up by our carriers, and reassemble it as soon as he receives it.
Before making your choice, you need to identify the part number of the defective product. The manufacturer engraves a series of numbers and/or letters on the gearbox housing.
You need this code to place your order. If you can't find it, EDEN BOITES will advise you based on your model.
Contact us now in our online store!
