Reconditioned Mercedes Classe G 3.0 D Engine – Bare Engine – Ref. 617931
- 100% secure online payment
- Delivery to your garage or home, anywhere in Europe
- 12-month parts warranty
- Reconditioned and bench-tested
- Part
- Engine
- Part type
- Bare Engine
- Make
- Mercedes
- Model
- Classe G
- Engine
- 3.0 D
- Fuel
- Diesel
- Reference
- 617931
- Warranty
- 12 months
- Features
- BARE ENGINE
- REBUILD OF YOUR OWN UNIT
An expert is here to help
Not sure you've found the right part?
Reconditioned Mercedes Classe G 3.0 D Engine – Ref. 617931
This Mercedes Classe G 3.0 D engine, reference 617931, has been reconditioned to restore performance close to original factory levels. With an engine capacity of 2998 cm³, it corresponds to the diesel unit identified under engine code OM 617.931, specific to this model. Before placing an order, we recommend verifying the exact compatibility of reference 617931 with your vehicle, in particular via the engine plate or serial number. The reconditioning follows a comprehensive process: the engine is fully stripped down, every component is cleaned and precisely inspected, internal wear parts are replaced according to their condition, and the whole unit is then reassembled to manufacturer tolerances before a final bench test, ensuring reliability and longevity.
Signs That Your Engine Needs Replacing or Rebuilding
Several symptoms point to engine failure that warrants attention: a noticeable loss of power under acceleration, abnormal exhaust smoke, excessive oil or fuel consumption, unusual mechanical noises at idle or under load, excessive vibrations, or a persistent engine warning light on the dashboard. These signs generally indicate advanced wear of internal components; left too long, they can lead to more serious and costly damage. In such cases, a full rebuild is the right course of action rather than a one-off repair that fails to address the root cause of the problem.
Rebuilding Your Own Unit, Ready to Refit
This service applies to your own engine: the unit bearing reference 617931 is entrusted to us, fully reconditioned using the process described above, bench-tested, and then returned to you ready to be refitted to the vehicle. It is supplied as a bare engine, and the exact details of what is included in the service are set out in the quote drawn up for your engine; certain components may be retained or replaced depending on their condition at the time of strip-down.
Warranty and Payment
This rebuilt engine comes with a 12-month parts warranty, subject to fitting being carried out by a qualified professional. Payment for your order can be spread over several instalments, in up to 10 instalments, to help manage your budget.
Reconditioned Mercedes Classe G 3.0 D Engine – Ref. 617931
This Mercedes Classe G 3.0 D engine, reference 617931, has been reconditioned to restore performance close to original factory levels. With an engine capacity of 2998 cm³, it corresponds to the diesel unit identified under engine code OM 617.931, specific to this model. Before placing an order, we recommend verifying the exact compatibility of reference 617931 with your vehicle, in particular via the engine plate or serial number. The reconditioning follows a comprehensive process: the engine is fully stripped down, every component is cleaned and precisely inspected, internal wear parts are replaced according to their condition, and the whole unit is then reassembled to manufacturer tolerances before a final bench test, ensuring reliability and longevity.
Signs That Your Engine Needs Replacing or Rebuilding
Several symptoms point to engine failure that warrants attention: a noticeable loss of power under acceleration, abnormal exhaust smoke, excessive oil or fuel consumption, unusual mechanical noises at idle or under load, excessive vibrations, or a persistent engine warning light on the dashboard. These signs generally indicate advanced wear of internal components; left too long, they can lead to more serious and costly damage. In such cases, a full rebuild is the right course of action rather than a one-off repair that fails to address the root cause of the problem.
Rebuilding Your Own Unit, Ready to Refit
This service applies to your own engine: the unit bearing reference 617931 is entrusted to us, fully reconditioned using the process described above, bench-tested, and then returned to you ready to be refitted to the vehicle. It is supplied as a bare engine, and the exact details of what is included in the service are set out in the quote drawn up for your engine; certain components may be retained or replaced depending on their condition at the time of strip-down.
Warranty and Payment
This rebuilt engine comes with a 12-month parts warranty, subject to fitting being carried out by a qualified professional. Payment for your order can be spread over several instalments, in up to 10 instalments, to help manage your budget.
Frequently asked questions
Everything you need to know before ordering your part.
3 options, 1 obvious choice
Compare what you really get for your money.
EDEN reconditioned
Up to 3× cheaper than new
- Rebuilt to 0 km
- Tested & certified
- Wear parts replaced with new
- Up to 24-month warranty
- Pay in up to 10 instalments
- Simple, fast exchange process
- Compatibility checked by an expert
- After-sales & advisers in France
- Fast delivery throughout France
- Circular economy, better for the planet
New part
€€€ · up to 3× more expensive
- Maximum reliability
- Manufacturer's warranty
- Full price, no discount
- Sometimes long lead times
- Rarely worth it on an older vehicle
- New manufacturing = heavy on the planet
Used
€ · a lottery
- Unknown mileage
- Not inspected
- No warranty
- Unpredictable price
- Risk of early failure
- Uncertain compatibility
- No after-sales, no follow-up
- Can end up costing twice as much
