Reconditioned BMW X5 3.0d Transfer Case – Transfer – Ref. ATC450
- 100% secure online payment
- Delivery to your garage or home, anywhere in Europe
- 24-month parts warranty
- Reconditioned and bench-tested
- Part
- Transfer Case
- Part type
- Transfer Case
- Make
- BMW
- Model
- X5
- Engine
- 3.0d
- Fuel
- Diesel
- Reference
- ATC450
- Warranty
- 24 months
- Feature
- TRANSFER CASE SOLD WITHOUT ELECTRONICS
An expert is here to help
Not sure you've found the right part?
Reconditioned BMW X5 3.0d Transfer Case – Reference ATC450
This reconditioned transfer case for the BMW X5 3.0d, compatible with M57D30 (306D1/306D2), M57N2 (306D3) and N57D30 engines with a 2 993 cm³ capacity, is supplied under reference ATC450. The reconditioning process involves a full strip-down of the unit, thorough cleaning and inspection of every component, replacement of internal wear parts such as gears, bearings and seals, followed by reassembly to manufacturer tolerances and a bench test prior to dispatch.
Signs That Your Transfer Case Needs Replacing
- Unusual noise when torque is distributed between the axles
- Vibrations or juddering felt during tight cornering or on slippery surfaces
- xDrive warning light or all-wheel-drive system warning illuminated on the dashboard
- Difficulty engaging four-wheel-drive mode
- Oil leak detected at the transfer case housing
Exchange Basis: No Downtime for Your Garage
This ATC450 transfer case is dispatched immediately on an exchange basis: the reconditioned unit is sent out before the old one is collected. The old housing, whether intact casing or complete unit, is only taken back after delivery and fitting, so the axle is never left off the road unnecessarily. Return of the old unit is required, in accordance with our Terms and Conditions.
Exclusion: Electronics Not Included
This ATC450 transfer case is sold without the associated electronics: the electronic control unit is not supplied or included in the sale, it is neither reconditioned nor tested, and it remains the vehicle's original unit, to be reused by the customer during fitting.
Compatibility
Reference ATC450 is suitable for BMW X5 3.0d vehicles fitted with M57D30 (306D1/306D2), M57N2 (306D3) and N57D30 engines, with a capacity of 2 993 cm³.
Warranty and Payment
This transfer case comes with a 24-month parts warranty, subject to fitting by a qualified professional. Payment can be spread over up to 10 instalments.
EDEN BOITES supports you from quote through to collection of the old unit.
Compatible Vehicles (Ref. ATC450)
This reference also fits:
Reconditioned BMW X5 3.0d Transfer Case – Reference ATC450
This reconditioned transfer case for the BMW X5 3.0d, compatible with M57D30 (306D1/306D2), M57N2 (306D3) and N57D30 engines with a 2 993 cm³ capacity, is supplied under reference ATC450. The reconditioning process involves a full strip-down of the unit, thorough cleaning and inspection of every component, replacement of internal wear parts such as gears, bearings and seals, followed by reassembly to manufacturer tolerances and a bench test prior to dispatch.
Signs That Your Transfer Case Needs Replacing
- Unusual noise when torque is distributed between the axles
- Vibrations or juddering felt during tight cornering or on slippery surfaces
- xDrive warning light or all-wheel-drive system warning illuminated on the dashboard
- Difficulty engaging four-wheel-drive mode
- Oil leak detected at the transfer case housing
Exchange Basis: No Downtime for Your Garage
This ATC450 transfer case is dispatched immediately on an exchange basis: the reconditioned unit is sent out before the old one is collected. The old housing, whether intact casing or complete unit, is only taken back after delivery and fitting, so the axle is never left off the road unnecessarily. Return of the old unit is required, in accordance with our Terms and Conditions.
Exclusion: Electronics Not Included
This ATC450 transfer case is sold without the associated electronics: the electronic control unit is not supplied or included in the sale, it is neither reconditioned nor tested, and it remains the vehicle's original unit, to be reused by the customer during fitting.
Compatibility
Reference ATC450 is suitable for BMW X5 3.0d vehicles fitted with M57D30 (306D1/306D2), M57N2 (306D3) and N57D30 engines, with a capacity of 2 993 cm³.
Warranty and Payment
This transfer case comes with a 24-month parts warranty, subject to fitting by a qualified professional. Payment can be spread over up to 10 instalments.
EDEN BOITES supports you from quote through to collection of the old unit.
Compatible Vehicles (Ref. ATC450)
This reference also fits:
Frequently asked questions
Everything you need to know before ordering your part.
3 options, 1 obvious choice
Compare what you really get for your money.
EDEN reconditioned
Up to 3× cheaper than new
- Rebuilt to 0 km
- Tested & certified
- Wear parts replaced with new
- Up to 24-month warranty
- Pay in up to 10 instalments
- Simple, fast exchange process
- Compatibility checked by an expert
- After-sales & advisers in France
- Fast delivery throughout France
- Circular economy, better for the planet
New part
€€€ · up to 3× more expensive
- Maximum reliability
- Manufacturer's warranty
- Full price, no discount
- Sometimes long lead times
- Rarely worth it on an older vehicle
- New manufacturing = heavy on the planet
Used
€ · a lottery
- Unknown mileage
- Not inspected
- No warranty
- Unpredictable price
- Risk of early failure
- Uncertain compatibility
- No after-sales, no follow-up
- Can end up costing twice as much
