Reconditioned Peugeot Boxer 2.8 HDi Gearbox – 5-Speed Manual – Ref. 20KM54
- 100% secure online payment
- Delivery to your garage or home, anywhere in Europe
- 24-month parts warranty
- Reconditioned and bench-tested
- Part
- Gearbox
- Part type
- 5-Speed Manual
- Make
- Peugeot
- Model
- Boxer
- Engine
- 2.8 HDi
- Fuel
- Diesel
- Reference
- 20KM54
- Warranty
- 24 months
- Feature
- REBUILD OF YOUR OWN UNIT
An expert is here to help
Not sure you've found the right part?
Reconditioned Peugeot Boxer 2.8 HDi Gearbox – Reference 20KM54
This reconditioned gearbox for the Peugeot Boxer 2.8 HDi is compatible with the 8140.43S and F28DTCR engines with an engine capacity of 2800 cm³, and corresponds to reference 20KM54. A 5-speed manual unit, it is fitted to a large number of Boxer vans used for heavy-load transport – work that places considerable strain on the synchromesh rings and internal bearings over time. This commercial vehicle, widely used by transport and logistics professionals, subjects the entire drivetrain to intense mechanical stress.
On a Boxer 2.8 HDi, several signs point to a worn gearbox: difficult or crunching gear changes between second and third, gear jumping under load, a metallic background noise at idle with the clutch depressed, vibrations in neutral, or oil leaking from the casing. These symptoms often worsen when towing a trailer or carrying a heavy load – typical use for this van.
- Stiff or grinding gear changes
- Gear jumping whilst driving, particularly under load
- Abnormal noise in neutral
- Vibrations or judder during gear changes
- Oil leak from the gearbox casing
Rebuild of Your Own Unit – Ready to Fit
With this service, you send us your own gearbox referenced 20KM54: it is fully stripped down, every component is cleaned and inspected, and any worn gears, synchromesh rings, bearings and seals are replaced. The gearbox is then reassembled to manufacturer specifications and bench-tested before being returned to you. This service does not include the mechatronic unit: this electronic component remains the original one from your vehicle and must be reused as-is, with no inspection or replacement carried out on it.
Compatibility
This rebuilt gearbox is intended for Peugeot Boxer vehicles fitted with the 8140.43S and F28DTCR engines – 2.8 HDi diesel with an engine capacity of 2800 cm³. It is suitable for both panel van versions and cab-chassis variants equipped with this diesel engine. Please check that reference 20KM54 appears on your original unit before dispatch to confirm exact compatibility with your vehicle.
Warranty and Payment
The rebuild of your gearbox is covered by a 24-month parts warranty, valid subject to fitting being carried out by a qualified professional. Payment for this service can be spread over multiple instalments, up to 10 instalments.
EDEN BOITES supports you from the initial quote through to the return of your rebuilt unit.
Compatible Vehicles (Ref. 20KM54)
This reference also fits:
Reconditioned Peugeot Boxer 2.8 HDi Gearbox – Reference 20KM54
This reconditioned gearbox for the Peugeot Boxer 2.8 HDi is compatible with the 8140.43S and F28DTCR engines with an engine capacity of 2800 cm³, and corresponds to reference 20KM54. A 5-speed manual unit, it is fitted to a large number of Boxer vans used for heavy-load transport – work that places considerable strain on the synchromesh rings and internal bearings over time. This commercial vehicle, widely used by transport and logistics professionals, subjects the entire drivetrain to intense mechanical stress.
On a Boxer 2.8 HDi, several signs point to a worn gearbox: difficult or crunching gear changes between second and third, gear jumping under load, a metallic background noise at idle with the clutch depressed, vibrations in neutral, or oil leaking from the casing. These symptoms often worsen when towing a trailer or carrying a heavy load – typical use for this van.
- Stiff or grinding gear changes
- Gear jumping whilst driving, particularly under load
- Abnormal noise in neutral
- Vibrations or judder during gear changes
- Oil leak from the gearbox casing
Rebuild of Your Own Unit – Ready to Fit
With this service, you send us your own gearbox referenced 20KM54: it is fully stripped down, every component is cleaned and inspected, and any worn gears, synchromesh rings, bearings and seals are replaced. The gearbox is then reassembled to manufacturer specifications and bench-tested before being returned to you. This service does not include the mechatronic unit: this electronic component remains the original one from your vehicle and must be reused as-is, with no inspection or replacement carried out on it.
Compatibility
This rebuilt gearbox is intended for Peugeot Boxer vehicles fitted with the 8140.43S and F28DTCR engines – 2.8 HDi diesel with an engine capacity of 2800 cm³. It is suitable for both panel van versions and cab-chassis variants equipped with this diesel engine. Please check that reference 20KM54 appears on your original unit before dispatch to confirm exact compatibility with your vehicle.
Warranty and Payment
The rebuild of your gearbox is covered by a 24-month parts warranty, valid subject to fitting being carried out by a qualified professional. Payment for this service can be spread over multiple instalments, up to 10 instalments.
EDEN BOITES supports you from the initial quote through to the return of your rebuilt unit.
Compatible Vehicles (Ref. 20KM54)
This reference also fits:
Frequently asked questions
Everything you need to know before ordering your part.
3 options, 1 obvious choice
Compare what you really get for your money.
EDEN reconditioned
Up to 3× cheaper than new
- Rebuilt to 0 km
- Tested & certified
- Wear parts replaced with new
- Up to 24-month warranty
- Pay in up to 10 instalments
- Simple, fast exchange process
- Compatibility checked by an expert
- After-sales & advisers in France
- Fast delivery throughout France
- Circular economy, better for the planet
New part
€€€ · up to 3× more expensive
- Maximum reliability
- Manufacturer's warranty
- Full price, no discount
- Sometimes long lead times
- Rarely worth it on an older vehicle
- New manufacturing = heavy on the planet
Used
€ · a lottery
- Unknown mileage
- Not inspected
- No warranty
- Unpredictable price
- Risk of early failure
- Uncertain compatibility
- No after-sales, no follow-up
- Can end up costing twice as much