New Audi S3 2.0 TFSI Turbo – Ref. 06F145702C
- 100% secure online payment
- Delivery to your garage or home, anywhere in Europe
- 12-month parts warranty
- Reconditioned and checked turbo
- Part
- Turbo
- Part type
- New turbo
- Make
- Audi
- Model
- S3
- Engine
- 2.0 TFSI
- Fuel
- Petrol
- Equivalent references
- 06F145702C, 06F145702CV, 06F145702CX, 53049880064
- Warranty
- 12 months
An expert is here to help
Not sure you've found the right part?
Signs of a worn turbo on your Audi S3 2.0 TFSI
On the Audi S3 2.0 TFSI fitted with the BHZ engine, a turbo nearing the end of its life typically shows itself through a loss of power on acceleration, an unusual whistling noise under throttle, blue smoke from the exhaust indicating abnormal oil consumption, or an engine warning light accompanied by the vehicle entering limp mode. On this turbocharged petrol unit, these symptoms generally point to worn bearings, excessive play in the turbine shaft, or a leak at the internal seals.
A new turbo compatible with reference 06F145702C
This new turbo is compatible with reference 06F145702C and its equivalents, and fits Audi S3 models equipped with the 2.0 TFSI engine, engine code BHZ. Before ordering, it is strongly recommended that you check the reference number on your old turbo to confirm exact compatibility with your vehicle.
Straightforward sale – no unit to return
This new turbo is sold as a straightforward sale: there is no unit to return, no collection to arrange and no deposit required. A single delivery is all it takes to receive your new turbo, ready to be fitted by a professional.
Warranty and payment options
The turbo is covered by a 12-month parts warranty, subject to fitting being carried out by a professional. You can pay for your order in instalments – pay in up to 10 instalments for greater flexibility.
Advice before and during fitting
- Check the condition of the oil circuit (pressure and cleanliness) before installing the new turbo.
- Inspect the intake and boost hoses as well as the air intake to rule out any leaks.
- Prime the turbo with oil before the first start-up to ensure immediate lubrication of the bearings.
- Replace the engine oil and oil filter at the time of fitting, and check the condition of the air filter and intercooler.
- Drive considerately to protect the turbo: avoid high revs when the engine is cold, and allow the engine to cool down before switching off after hard use.
Regular attention to lubrication, oil quality and the cleanliness of the air circuits will help extend the life of your new turbo on your Audi S3 2.0 TFSI.
Signs of a worn turbo on your Audi S3 2.0 TFSI
On the Audi S3 2.0 TFSI fitted with the BHZ engine, a turbo nearing the end of its life typically shows itself through a loss of power on acceleration, an unusual whistling noise under throttle, blue smoke from the exhaust indicating abnormal oil consumption, or an engine warning light accompanied by the vehicle entering limp mode. On this turbocharged petrol unit, these symptoms generally point to worn bearings, excessive play in the turbine shaft, or a leak at the internal seals.
A new turbo compatible with reference 06F145702C
This new turbo is compatible with reference 06F145702C and its equivalents, and fits Audi S3 models equipped with the 2.0 TFSI engine, engine code BHZ. Before ordering, it is strongly recommended that you check the reference number on your old turbo to confirm exact compatibility with your vehicle.
Straightforward sale – no unit to return
This new turbo is sold as a straightforward sale: there is no unit to return, no collection to arrange and no deposit required. A single delivery is all it takes to receive your new turbo, ready to be fitted by a professional.
Warranty and payment options
The turbo is covered by a 12-month parts warranty, subject to fitting being carried out by a professional. You can pay for your order in instalments – pay in up to 10 instalments for greater flexibility.
Advice before and during fitting
- Check the condition of the oil circuit (pressure and cleanliness) before installing the new turbo.
- Inspect the intake and boost hoses as well as the air intake to rule out any leaks.
- Prime the turbo with oil before the first start-up to ensure immediate lubrication of the bearings.
- Replace the engine oil and oil filter at the time of fitting, and check the condition of the air filter and intercooler.
- Drive considerately to protect the turbo: avoid high revs when the engine is cold, and allow the engine to cool down before switching off after hard use.
Regular attention to lubrication, oil quality and the cleanliness of the air circuits will help extend the life of your new turbo on your Audi S3 2.0 TFSI.
Frequently asked questions
Everything you need to know before ordering your part.
