New BMW Série 3 Turbo – Ref. 758352-5026W
- 100% secure online payment
- Delivery to your garage or home, anywhere in Europe
- 12-month parts warranty
- Reconditioned and checked turbo
- Part
- Turbo
- Part type
- New turbo
- Make
- BMW
- Model
- Série 3
- Engine
- 325d, 330d, 330xd
- Fuel
- Diesel
- Equivalent references
- 758352-5026W, 11647796311108, 116557796311H07, 11657796311, 11657796311E, 11657796311J09, 11657796311K10, 11657796311M12, 11657796312, 11657796312M12, 7796311, 7796311108, 7796311E, 7796311H07, 7796311J09, 7796311K10, 7796311M12, 7796312, 7796312014, 7796312M12, 7796312P15
- Warranty
- 12 months
An expert is here to help
Not sure you've found the right part?
A new turbo built for the real-world demands of your BMW Série 3
Whether it is used for long motorway runs, regular business journeys or stop-start urban driving, the diesel BMW Série 3 puts its turbocharger under considerable strain. Repeated pressure spikes, idling after hard driving and constantly varying engine loads can all accelerate turbo wear, particularly if the oil circuit has not been serviced diligently. This new turbo is designed to restore factory-standard performance on this model.
Compatibility with BMW Série 3 engines
This new turbo is compatible with reference 758352-5026W, fitted to BMW Série 3 models (body styles E90, E91, E92, E93) equipped with the 325d, 330d and 330xd engines — 2993 cm³ diesel units corresponding to engine codes M57306D3 and N57N306D3. Before placing an order, we recommend checking the exact reference stamped on the old turbo or shown on the vehicle registration document, as certain body and power variants may share closely related references.
Exchange basis and warranty on this turbo
This turbo is sold on an exchange basis: return of the old turbo is required in accordance with our Terms and Conditions, and it is only collected after the new turbo has been delivered and fitted, so your BMW Série 3 is never left off the road unnecessarily. The part carries a 12-month parts warranty, subject to fitting by a qualified professional. Payment can be spread over up to 10 instalments.
Advice before and after fitting
On the 3.0 diesel units fitted to the Série 3, turbo longevity depends heavily on the quality and frequency of oil changes, the condition of the air filter and the integrity of the intercooler. Before fitting, it is essential to check the oil circuit (hoses and return lines) and the air intake to eliminate any risk of contamination or inadequate lubrication. On first start-up, the new turbo must be primed with oil to ensure immediate lubrication of the bearings and protect the long-term reliability of the part.
A new turbo built for the real-world demands of your BMW Série 3
Whether it is used for long motorway runs, regular business journeys or stop-start urban driving, the diesel BMW Série 3 puts its turbocharger under considerable strain. Repeated pressure spikes, idling after hard driving and constantly varying engine loads can all accelerate turbo wear, particularly if the oil circuit has not been serviced diligently. This new turbo is designed to restore factory-standard performance on this model.
Compatibility with BMW Série 3 engines
This new turbo is compatible with reference 758352-5026W, fitted to BMW Série 3 models (body styles E90, E91, E92, E93) equipped with the 325d, 330d and 330xd engines — 2993 cm³ diesel units corresponding to engine codes M57306D3 and N57N306D3. Before placing an order, we recommend checking the exact reference stamped on the old turbo or shown on the vehicle registration document, as certain body and power variants may share closely related references.
Exchange basis and warranty on this turbo
This turbo is sold on an exchange basis: return of the old turbo is required in accordance with our Terms and Conditions, and it is only collected after the new turbo has been delivered and fitted, so your BMW Série 3 is never left off the road unnecessarily. The part carries a 12-month parts warranty, subject to fitting by a qualified professional. Payment can be spread over up to 10 instalments.
Advice before and after fitting
On the 3.0 diesel units fitted to the Série 3, turbo longevity depends heavily on the quality and frequency of oil changes, the condition of the air filter and the integrity of the intercooler. Before fitting, it is essential to check the oil circuit (hoses and return lines) and the air intake to eliminate any risk of contamination or inadequate lubrication. On first start-up, the new turbo must be primed with oil to ensure immediate lubrication of the bearings and protect the long-term reliability of the part.
Frequently asked questions
Everything you need to know before ordering your part.
