New BMW Série 4 Turbo – Ref. 18539880007
- 100% secure online payment
- Delivery to your garage or home, anywhere in Europe
- 12-month parts warranty
- Reconditioned and checked turbo
- Part
- Turbo
- Part type
- New turbo
- Make
- BMW
- Model
- Série 4
- Engine
- 435i
- Fuel
- Petrol
- Equivalent references
- 18539880007, 11652470368, 11654577236, 11657588995, 11657636424, 2470368, 4577236, 7588995, 7636424
- Warranty
- 12 months
An expert is here to help
Not sure you've found the right part?
Symptoms of a failing turbo on a BMW Série 4 435i
On the BMW Série 4 435i fitted with the N55B30A petrol engine, a turbo nearing the end of its life typically shows itself through a gradual loss of power under acceleration, an unusual whistling noise on the intake side, an illuminated engine warning light, or blue smoke from the exhaust indicating abnormal oil consumption. A turbo stuck in limp mode or surging at boost pressure build-up should also alert the driver of a 435i – a performance-focused car that demands sharp engine response.
About the new turbo for the BMW Série 4 435i
This new turbo is compatible with reference 18539880007 and has been designed to restore the original performance of the N55B30A engine fitted to the BMW Série 4 435i. It delivers a crisp rev build-up, stable boost pressure and quiet operation, fully in keeping with the expectations of a performance-oriented model.
Engine compatibility and reference check
This new turbo is intended for BMW Série 4 435i models with the N55B30A petrol engine. Before placing an order, we recommend checking the reference number on the old turbo to ensure perfect compatibility with your vehicle, as certain variants within the range may share closely related components.
Exchange basis and warranty
This new turbo is sold on an exchange basis: return of the old turbo is required, in accordance with our Terms and Conditions. It is only collected after the new turbo has been delivered and fitted to the BMW Série 4 435i, so the vehicle is not left off the road unnecessarily. The part carries a 12-month parts warranty, subject to fitting by a qualified professional.
Fitting advice for the BMW Série 4 435i
Before installation, check the condition of the oil circuit, hoses and air intake to avoid any contamination of the new turbo. Oil priming before the first start-up is essential to ensure immediate lubrication of the bearings. On the N55B30A, the quality and frequency of engine oil changes, the condition of the air filter and intercooler, and avoiding high revs when the engine is cold are all key factors in preserving the life of the turbo. Payment for your order can be spread over several instalments, in up to 10 instalments.
This same turbo also fits
Symptoms of a failing turbo on a BMW Série 4 435i
On the BMW Série 4 435i fitted with the N55B30A petrol engine, a turbo nearing the end of its life typically shows itself through a gradual loss of power under acceleration, an unusual whistling noise on the intake side, an illuminated engine warning light, or blue smoke from the exhaust indicating abnormal oil consumption. A turbo stuck in limp mode or surging at boost pressure build-up should also alert the driver of a 435i – a performance-focused car that demands sharp engine response.
About the new turbo for the BMW Série 4 435i
This new turbo is compatible with reference 18539880007 and has been designed to restore the original performance of the N55B30A engine fitted to the BMW Série 4 435i. It delivers a crisp rev build-up, stable boost pressure and quiet operation, fully in keeping with the expectations of a performance-oriented model.
Engine compatibility and reference check
This new turbo is intended for BMW Série 4 435i models with the N55B30A petrol engine. Before placing an order, we recommend checking the reference number on the old turbo to ensure perfect compatibility with your vehicle, as certain variants within the range may share closely related components.
Exchange basis and warranty
This new turbo is sold on an exchange basis: return of the old turbo is required, in accordance with our Terms and Conditions. It is only collected after the new turbo has been delivered and fitted to the BMW Série 4 435i, so the vehicle is not left off the road unnecessarily. The part carries a 12-month parts warranty, subject to fitting by a qualified professional.
Fitting advice for the BMW Série 4 435i
Before installation, check the condition of the oil circuit, hoses and air intake to avoid any contamination of the new turbo. Oil priming before the first start-up is essential to ensure immediate lubrication of the bearings. On the N55B30A, the quality and frequency of engine oil changes, the condition of the air filter and intercooler, and avoiding high revs when the engine is cold are all key factors in preserving the life of the turbo. Payment for your order can be spread over several instalments, in up to 10 instalments.
This same turbo also fits
Frequently asked questions
Everything you need to know before ordering your part.
