New Peugeot Bipper Turbo – Ref. 54359880021
- 100% secure online payment
- Delivery to your garage or home, anywhere in Europe
- 12-month parts warranty
- Reconditioned and checked turbo
- Part
- Turbo
- Part type
- New turbo
- Make
- Peugeot
- Model
- Bipper
- Engine
- 1.4 HDi 68
- Fuel
- Diesel
- Reference
- 54359880021, 0375N6, 0375Q6, 9661557480, SU00100559
- Warranty
- 12 months
An expert is here to help
Not sure you've found the right part?
A new turbo designed for the Peugeot Bipper's working life
The Peugeot Bipper is first and foremost a commercial vehicle, used for delivery rounds, repeated urban journeys and daily professional use. This type of duty cycle — frequent stops, rapid acceleration and loads often close to the maximum payload — puts considerable strain on the 1.4 HDi turbocharger. On short, stop-start routes, the turbo does not always reach its optimum operating temperature before the engine is switched off, which encourages carbon build-up and accelerates bearing wear if servicing is not kept up to date. Fitting a new turbo restores correct boost pressure and eliminates the power loss felt under load or on inclines.
Compatibility with the Peugeot Bipper 1.4 HDi 68
This new turbo is compatible with reference 54359880021, intended for the Peugeot Bipper fitted with the 1.4 HDi 68 diesel engine with a capacity of approximately 1398 cm³. Before placing an order, it is essential to check the exact reference marked on the old turbo or on the vehicle's identification plate, as commercial designations may cover several technical variants depending on the version of the Bipper.
Equivalent references
- 0375N6
- 0375Q6
- 54359880021
- 9661557480
- SU00100559
Exchange basis and warranty on this turbo
This new turbo is sold on an exchange basis: return of the old turbo is required, in accordance with our Terms and Conditions, and takes place only after the new turbo has been delivered and fitted, so that the Bipper is not off the road any longer than necessary for a vehicle in professional use. The part is covered by a 12-month parts warranty, subject to fitting being carried out by a qualified professional. Payment can be spread over up to 10 instalments.
Advice before and after fitting the turbo
On the Bipper's 1.4 HDi, most turbo failures stem from insufficient lubrication caused by unsuitable oil, missed oil changes or a blocked oil filter. A clogged air filter or a damaged intercooler can also disrupt turbo operation and accelerate wear. Before fitting, it is recommended to check the oil circuit, the condition of the hoses and the cleanliness of the air intake, then to pre-lubricate the new turbo with oil before the first start-up to ensure immediate bearing lubrication.
This same turbo also fits
A new turbo designed for the Peugeot Bipper's working life
The Peugeot Bipper is first and foremost a commercial vehicle, used for delivery rounds, repeated urban journeys and daily professional use. This type of duty cycle — frequent stops, rapid acceleration and loads often close to the maximum payload — puts considerable strain on the 1.4 HDi turbocharger. On short, stop-start routes, the turbo does not always reach its optimum operating temperature before the engine is switched off, which encourages carbon build-up and accelerates bearing wear if servicing is not kept up to date. Fitting a new turbo restores correct boost pressure and eliminates the power loss felt under load or on inclines.
Compatibility with the Peugeot Bipper 1.4 HDi 68
This new turbo is compatible with reference 54359880021, intended for the Peugeot Bipper fitted with the 1.4 HDi 68 diesel engine with a capacity of approximately 1398 cm³. Before placing an order, it is essential to check the exact reference marked on the old turbo or on the vehicle's identification plate, as commercial designations may cover several technical variants depending on the version of the Bipper.
Equivalent references
- 0375N6
- 0375Q6
- 54359880021
- 9661557480
- SU00100559
Exchange basis and warranty on this turbo
This new turbo is sold on an exchange basis: return of the old turbo is required, in accordance with our Terms and Conditions, and takes place only after the new turbo has been delivered and fitted, so that the Bipper is not off the road any longer than necessary for a vehicle in professional use. The part is covered by a 12-month parts warranty, subject to fitting being carried out by a qualified professional. Payment can be spread over up to 10 instalments.
Advice before and after fitting the turbo
On the Bipper's 1.4 HDi, most turbo failures stem from insufficient lubrication caused by unsuitable oil, missed oil changes or a blocked oil filter. A clogged air filter or a damaged intercooler can also disrupt turbo operation and accelerate wear. Before fitting, it is recommended to check the oil circuit, the condition of the hoses and the cleanliness of the air intake, then to pre-lubricate the new turbo with oil before the first start-up to ensure immediate bearing lubrication.
This same turbo also fits
Frequently asked questions
Everything you need to know before ordering your part.
