New BMW Série 2 Turbo – Ref. 54409880024
- 100% secure online payment
- Delivery to your garage or home, anywhere in Europe
- 12-month parts warranty
- Reconditioned and checked turbo
- Part
- Turbo
- Part type
- New turbo
- Make
- BMW
- Model
- Série 2
- Engine
- 218d
- Fuel
- Diesel
- Equivalent references
- 54409880024, 11658513635, 11658513636, 54409880031, 54409880038, 54409880043, 8513635, 8513636
- Warranty
- 12 months
An expert is here to help
Not sure you've found the right part?
Diagnosing the turbo before replacing it on your BMW Série 2 218d
Before considering a turbocharger replacement on your BMW Série 2 218d, a thorough diagnosis is recommended. Loss of power under acceleration, an unusual whistling noise from under the bonnet, black or bluish exhaust smoke, or abnormal oil consumption can all point to the turbo – but equally to other components such as the EGR valve or a pressure sensor. A diagnostic scan and a visual inspection of the turbo (shaft play, oil traces, condition of the impeller wheel) will confirm the true cause of the fault before you order the part.
Overview of the turbo compatible with reference 54409880024 for the Série 2
This new turbo is compatible with reference 54409880024 and fits BMW Série 2 models (Active Tourer F45, Gran Tourer F46, Coupé/Cabriolet F22/F23) powered by the 218d, a diesel unit of 1995 cm3 identified by engine codes B47 C20 A and B47 C20 B. It provides the boost pressure required for correct engine operation and helps restore the vehicle's original performance and fuel economy.
Checking compatibility with the old turbo on your Série 2
Before placing an order, we recommend checking the reference number printed on your old turbo or on the vehicle registration document to ensure full compatibility with your BMW Série 2 218d.
Exchange basis and warranty for this Série 2 turbo
This new turbo is sold on an exchange basis: return of your old turbo is required in accordance with our Terms and Conditions, and it is only collected after the new part has been delivered and fitted, so your BMW Série 2 is not left off the road unnecessarily. The part is covered by a 12-month parts warranty, subject to fitting being carried out by a qualified professional. Payment can be spread over several instalments, in up to 10 instalments.
Fitting advice for the turbo on your BMW Série 2 218d
On this B47 engine, turbo service life is heavily dependent on the quality and frequency of oil changes, as well as the condition of the air filter and oil circuit. Before fitting, it is advisable to check the condition of the hoses between the turbo and the intake, the cleanliness of the intercooler, and that the oil passages are free from blockage. Allowing the engine to warm up gradually during driving reduces premature bearing wear. When starting up, priming the turbo with oil is essential to avoid dry running on first start.
- Check the oil circuit before fitting
- Inspect the hoses and air intake
- Prime with oil before the first start
This same turbo also fits
Diagnosing the turbo before replacing it on your BMW Série 2 218d
Before considering a turbocharger replacement on your BMW Série 2 218d, a thorough diagnosis is recommended. Loss of power under acceleration, an unusual whistling noise from under the bonnet, black or bluish exhaust smoke, or abnormal oil consumption can all point to the turbo – but equally to other components such as the EGR valve or a pressure sensor. A diagnostic scan and a visual inspection of the turbo (shaft play, oil traces, condition of the impeller wheel) will confirm the true cause of the fault before you order the part.
Overview of the turbo compatible with reference 54409880024 for the Série 2
This new turbo is compatible with reference 54409880024 and fits BMW Série 2 models (Active Tourer F45, Gran Tourer F46, Coupé/Cabriolet F22/F23) powered by the 218d, a diesel unit of 1995 cm3 identified by engine codes B47 C20 A and B47 C20 B. It provides the boost pressure required for correct engine operation and helps restore the vehicle's original performance and fuel economy.
Checking compatibility with the old turbo on your Série 2
Before placing an order, we recommend checking the reference number printed on your old turbo or on the vehicle registration document to ensure full compatibility with your BMW Série 2 218d.
Exchange basis and warranty for this Série 2 turbo
This new turbo is sold on an exchange basis: return of your old turbo is required in accordance with our Terms and Conditions, and it is only collected after the new part has been delivered and fitted, so your BMW Série 2 is not left off the road unnecessarily. The part is covered by a 12-month parts warranty, subject to fitting being carried out by a qualified professional. Payment can be spread over several instalments, in up to 10 instalments.
Fitting advice for the turbo on your BMW Série 2 218d
On this B47 engine, turbo service life is heavily dependent on the quality and frequency of oil changes, as well as the condition of the air filter and oil circuit. Before fitting, it is advisable to check the condition of the hoses between the turbo and the intake, the cleanliness of the intercooler, and that the oil passages are free from blockage. Allowing the engine to warm up gradually during driving reduces premature bearing wear. When starting up, priming the turbo with oil is essential to avoid dry running on first start.
- Check the oil circuit before fitting
- Inspect the hoses and air intake
- Prime with oil before the first start
This same turbo also fits
Frequently asked questions
Everything you need to know before ordering your part.
