New Fiat Ducato Turbo – Ref. 796122-5010S
- 100% secure online payment
- Delivery to your garage or home, anywhere in Europe
- 12-month parts warranty
- Reconditioned and checked turbo
- Part
- Turbo
- Part type
- New turbo
- Make
- Fiat
- Model
- Ducato
- Engine
- 3.0 Multijet / 3.0 HDi
- Fuel
- Diesel
- Equivalent references
- 796122-5010S, 0375R8, 1616838080, 1651753680, 504373677, 5801894255, 71794936, 71794937, 71794946, 71795130, 71795131, 71795690
- Warranty
- 12 months
An expert is here to help
Not sure you've found the right part?
Identifying the correct turbo reference for your Fiat Ducato
Before placing an order, it is essential to check the reference printed on the identification plate of your original turbo or on the label affixed to the turbocharger body fitted to your Fiat Ducato. This new turbo is compatible with reference 796122-5010S, as well as all equivalent references listed on this page. A careful check avoids any ordering errors, particularly on a van like the Ducato, where several turbo variants may have been fitted across the range depending on power output and date of manufacture.
Compatible engines on the Ducato
This new turbo is intended for Fiat Ducato models fitted with the 3.0 Multijet / 3.0 HDi engine, a 2999 cm³ diesel unit used in the most powerful versions of this van. The engine codes concerned are F1C, F1CE0481D, F1CE3481E and F1CE3481N. We strongly recommend cross-checking these engine codes — typically stamped on the engine block — against those shown on your registration document or your old turbo before placing any order.
Exchange and warranty for your Ducato
This new turbo is sold on an exchange basis: return of the old unit is required, in accordance with our Terms and Conditions. The old unit is only collected after the new turbo has been delivered and fitted, so your Ducato is not off the road any longer than necessary — an important consideration for a commercial vehicle that is often in daily use. A 12-month parts warranty applies, subject to fitting being carried out by a qualified professional.
Advice before and after fitting
On a Ducato's 3.0 Multijet/HDi engine, turbo failure is frequently caused by a lubrication fault linked to poor-quality oil, missed oil changes, or a clogged air filter — the latter being a particularly common issue on a van exposed to dust and building-site conditions. Before fitting, check the oil circuit, the condition of the hoses, and the cleanliness of the air intake and intercooler, to prevent any contamination of the new turbo. On start-up, priming with oil is recommended to ensure immediate lubrication of the bearings. Drive gently for the first few kilometres, and always allow the engine to return to idle before switching off after hard use — a good habit that will help extend the life of the turbo on this type of vehicle.
Payment
Payment for your new Fiat Ducato turbo can be spread over several instalments, with up to 10 instalments available, to make your purchase more manageable.
Identifying the correct turbo reference for your Fiat Ducato
Before placing an order, it is essential to check the reference printed on the identification plate of your original turbo or on the label affixed to the turbocharger body fitted to your Fiat Ducato. This new turbo is compatible with reference 796122-5010S, as well as all equivalent references listed on this page. A careful check avoids any ordering errors, particularly on a van like the Ducato, where several turbo variants may have been fitted across the range depending on power output and date of manufacture.
Compatible engines on the Ducato
This new turbo is intended for Fiat Ducato models fitted with the 3.0 Multijet / 3.0 HDi engine, a 2999 cm³ diesel unit used in the most powerful versions of this van. The engine codes concerned are F1C, F1CE0481D, F1CE3481E and F1CE3481N. We strongly recommend cross-checking these engine codes — typically stamped on the engine block — against those shown on your registration document or your old turbo before placing any order.
Exchange and warranty for your Ducato
This new turbo is sold on an exchange basis: return of the old unit is required, in accordance with our Terms and Conditions. The old unit is only collected after the new turbo has been delivered and fitted, so your Ducato is not off the road any longer than necessary — an important consideration for a commercial vehicle that is often in daily use. A 12-month parts warranty applies, subject to fitting being carried out by a qualified professional.
Advice before and after fitting
On a Ducato's 3.0 Multijet/HDi engine, turbo failure is frequently caused by a lubrication fault linked to poor-quality oil, missed oil changes, or a clogged air filter — the latter being a particularly common issue on a van exposed to dust and building-site conditions. Before fitting, check the oil circuit, the condition of the hoses, and the cleanliness of the air intake and intercooler, to prevent any contamination of the new turbo. On start-up, priming with oil is recommended to ensure immediate lubrication of the bearings. Drive gently for the first few kilometres, and always allow the engine to return to idle before switching off after hard use — a good habit that will help extend the life of the turbo on this type of vehicle.
Payment
Payment for your new Fiat Ducato turbo can be spread over several instalments, with up to 10 instalments available, to make your purchase more manageable.
Frequently asked questions
Everything you need to know before ordering your part.