Reconditioned Nissan Cabstar Turbo – Ref. 767851-5003S
- 100% secure online payment
- Delivery to your garage or home, anywhere in Europe
- 12-month parts warranty
- Reconditioned and checked turbo
- Part
- Turbo
- Part type
- New turbo
- Make
- Nissan
- Model
- Cabstar
- Engine
- 3.0 D 150 CV
- Fuel
- Diesel
- Reference
- 767851-5003S
- Warranty
- 12 months
An expert is here to help
Not sure you've found the right part?
Diagnose before replacing the turbo on your Nissan Cabstar 3.0 D
Before any replacement, a methodical diagnosis of the turbocharger assembly on your Nissan Cabstar is strongly recommended. Check the axial and radial play of the turbine shaft, the condition of the wastegate actuator, any traces of oil in the intake or exhaust, and the colour of the exhaust smoke. Monitoring the boost pressure and visually inspecting the hoses and air circuit will often confirm the source of the fault before committing to a parts replacement.
New Turbo for Nissan Cabstar 3.0 D 150 CV
This new turbo is compatible with reference 767851-5003S and is intended for Nissan Cabstar vehicles fitted with the 3.0 D 150 CV diesel engine, engine code ZD30DDTi, with an engine capacity of 2953 cm³. This diesel unit, widely used across light commercial vehicles in this range, places considerable demands on its turbocharger under load and towing conditions, making boost quality a particularly critical factor in engine reliability.
Compatibility and reference verification
Before placing an order, it is advisable to check the reference marked on the old turbo as well as the associated OEM references, in order to confirm exact compatibility with your Nissan Cabstar.
Exchange and warranty
This new turbo is sold on an exchange basis: the old turbocharger must be returned in accordance with the Terms and Conditions, and collection takes place after delivery and fitting of the new turbo, so that the commercial vehicle is not left off the road. The part carries a 12-month parts warranty, subject to fitting by a qualified professional. Payment can be spread over several instalments, in up to 10 instalments.
Tips for a lasting installation on the Cabstar
- Check and clean the oil circuit along with the feed and return hoses before fitting
- Inspect the air filter and intercooler to prevent any contamination of the new turbo
- Observe the correct oil quality and change intervals, as these are a key factor in turbo longevity
- Prime the turbo with oil before starting the engine
- Drive gently, in particular avoiding high revs immediately after a cold start
Diagnose before replacing the turbo on your Nissan Cabstar 3.0 D
Before any replacement, a methodical diagnosis of the turbocharger assembly on your Nissan Cabstar is strongly recommended. Check the axial and radial play of the turbine shaft, the condition of the wastegate actuator, any traces of oil in the intake or exhaust, and the colour of the exhaust smoke. Monitoring the boost pressure and visually inspecting the hoses and air circuit will often confirm the source of the fault before committing to a parts replacement.
New Turbo for Nissan Cabstar 3.0 D 150 CV
This new turbo is compatible with reference 767851-5003S and is intended for Nissan Cabstar vehicles fitted with the 3.0 D 150 CV diesel engine, engine code ZD30DDTi, with an engine capacity of 2953 cm³. This diesel unit, widely used across light commercial vehicles in this range, places considerable demands on its turbocharger under load and towing conditions, making boost quality a particularly critical factor in engine reliability.
Compatibility and reference verification
Before placing an order, it is advisable to check the reference marked on the old turbo as well as the associated OEM references, in order to confirm exact compatibility with your Nissan Cabstar.
Exchange and warranty
This new turbo is sold on an exchange basis: the old turbocharger must be returned in accordance with the Terms and Conditions, and collection takes place after delivery and fitting of the new turbo, so that the commercial vehicle is not left off the road. The part carries a 12-month parts warranty, subject to fitting by a qualified professional. Payment can be spread over several instalments, in up to 10 instalments.
Tips for a lasting installation on the Cabstar
- Check and clean the oil circuit along with the feed and return hoses before fitting
- Inspect the air filter and intercooler to prevent any contamination of the new turbo
- Observe the correct oil quality and change intervals, as these are a key factor in turbo longevity
- Prime the turbo with oil before starting the engine
- Drive gently, in particular avoiding high revs immediately after a cold start
Frequently asked questions
Everything you need to know before ordering your part.
