Reconditioned Mercedes Classe C Turbo – Ref. 826830-5004S
- 100% secure online payment
- Delivery to your garage or home, anywhere in Europe
- 12-month parts warranty
- Reconditioned and checked turbo
- Part
- Turbo
- Part type
- New turbo
- Make
- Mercedes
- Model
- Classe C
- Engine
- C 350 CDI 4-Matic
- Fuel
- Diesel
- Equivalent references
- 826830-5004S, 6420902486, 642090248680, A6420902486, A642090248680
- Warranty
- 12 months
An expert is here to help
Not sure you've found the right part?
A new turbo designed for the Mercedes Classe C 350 CDI
The Mercedes Classe C 350 CDI 4-Matic is a powerful saloon, frequently used for long road and motorway journeys, sometimes under demanding conditions linked to the all-wheel-drive system and the high torque of the V6 Diesel engine. The regular high-rev use of the engine, combined with sharp acceleration, places constant strain on the turbocharger — particularly in terms of air pressure management and turbine lubrication. A new, reliable turbo that is correctly fitted allows the original performance of this V6 engine to be maintained while reducing the risk of premature failure.
Compatibility with the Classe C 350 CDI engine
This new turbo is compatible with reference 826830-5004S, intended for the 3.0-litre V6 Diesel engines (2987 cm³) fitted to the Mercedes Classe C 350 CDI 4-Matic, corresponding to engine codes OM642.854 and OM642.858. Before placing an order, it is recommended that you check the reference printed on the old turbo as well as the engine code shown on the vehicle's identification plate, in order to confirm exact compatibility with your Classe C.
Exchange and warranty
This new turbo is sold on an exchange basis: return of the old turbo is required, in accordance with our Terms and Conditions. It is only collected after the new turbo has been delivered and fitted, so that the Classe C is not left off the road. The part carries a 12-month parts warranty, subject to fitting being carried out by a qualified professional. Payment can be spread over multiple instalments, in up to 10 instalments.
Fitting advice for the Classe C 350 CDI
Before fitting the new turbo, it is essential to check the condition of the oil circuit, the intake hoses and the air intake, as well as the cleanliness of the intercooler, which is put under particular strain on this V6 Diesel. Pre-lubricating the turbo with oil before the first start-up is recommended to ensure immediate lubrication of the bearings. A recent oil change, a clean air filter, and avoiding high revs when the engine is cold will all help to extend the service life of the new turbo on your Classe C.
This same turbo also fits
A new turbo designed for the Mercedes Classe C 350 CDI
The Mercedes Classe C 350 CDI 4-Matic is a powerful saloon, frequently used for long road and motorway journeys, sometimes under demanding conditions linked to the all-wheel-drive system and the high torque of the V6 Diesel engine. The regular high-rev use of the engine, combined with sharp acceleration, places constant strain on the turbocharger — particularly in terms of air pressure management and turbine lubrication. A new, reliable turbo that is correctly fitted allows the original performance of this V6 engine to be maintained while reducing the risk of premature failure.
Compatibility with the Classe C 350 CDI engine
This new turbo is compatible with reference 826830-5004S, intended for the 3.0-litre V6 Diesel engines (2987 cm³) fitted to the Mercedes Classe C 350 CDI 4-Matic, corresponding to engine codes OM642.854 and OM642.858. Before placing an order, it is recommended that you check the reference printed on the old turbo as well as the engine code shown on the vehicle's identification plate, in order to confirm exact compatibility with your Classe C.
Exchange and warranty
This new turbo is sold on an exchange basis: return of the old turbo is required, in accordance with our Terms and Conditions. It is only collected after the new turbo has been delivered and fitted, so that the Classe C is not left off the road. The part carries a 12-month parts warranty, subject to fitting being carried out by a qualified professional. Payment can be spread over multiple instalments, in up to 10 instalments.
Fitting advice for the Classe C 350 CDI
Before fitting the new turbo, it is essential to check the condition of the oil circuit, the intake hoses and the air intake, as well as the cleanliness of the intercooler, which is put under particular strain on this V6 Diesel. Pre-lubricating the turbo with oil before the first start-up is recommended to ensure immediate lubrication of the bearings. A recent oil change, a clean air filter, and avoiding high revs when the engine is cold will all help to extend the service life of the new turbo on your Classe C.
This same turbo also fits
Frequently asked questions
Everything you need to know before ordering your part.
