New Citroën Berlingo Turbo – Ref. 706976-5001S
- 100% secure online payment
- Delivery to your garage or home, anywhere in Europe
- 12-month parts warranty
- Reconditioned and checked turbo
- Part
- Turbo
- Part type
- New turbo
- Make
- Citroën
- Model
- Berlingo
- Engine
- 2.0 HDi 90
- Fuel
- Diesel
- Equivalent references
- 706976-5001S, 0375E0, 0375E3, 0375E9, 0375EO, 0375F0, 0375H7, 1651753380, 37500000000, 706976-5002S, 9632406680, 9633614180
- Warranty
- 12 months
An expert is here to help
Not sure you've found the right part?
Identifying the correct turbo reference for your Citroën Berlingo
Before placing any order, it is essential to check the reference printed on the label of your old turbocharger or in your vehicle's documents. This new turbo is compatible with the main reference 706976-5001S, a part found on the Citroën Berlingo 1 fitted with the 2.0 HDi diesel engine producing 90 hp. This light commercial and family vehicle made extensive use of this engine, which was valued for its robustness in both professional and everyday use.
Engine and engine code covered on the Berlingo
On this model, the new turbo fits the engine identified by the code RHY, corresponding to the technical designation DW10TD, a 1997 cm³ diesel unit. This engine block was fitted to a large number of Berlingo vehicles used for deliveries or family transport, often subjected to repeated demands in town and on the road alike. Before fitting, always check the number stamped on the casing of your original turbo to confirm exact compatibility with your vehicle.
Exchange basis and warranty for this new turbo
This new turbo is sold on an exchange basis: return of the old turbocharger is required, in accordance with our Terms and Conditions. It is only collected after the new turbo has been delivered and fitted, so that your Berlingo is not left off the road any longer than necessary. The part comes with a 12-month parts warranty, subject to fitting being carried out by a qualified professional. Payment can be spread over several instalments, in up to 10 instalments, to help manage your budget.
Common causes of failure on the Berlingo's RHY engine
On this DW10TD engine, premature turbo failure is most often caused by inadequate lubrication due to poor-quality oil or missed oil changes, a clogged air filter, or a cracked intercooler allowing contaminants to enter. Revving the engine hard immediately after a cold start also accelerates wear on the bearings.
Points to check before fitting the new turbo
Before fitting this new turbo to your Berlingo, check the condition of the oil circuit, the cleanliness of the intake hoses and air intake, and ensure there are no metal particles in the lubrication circuit. When starting up for the first time, pre-lubricating the turbo with oil is essential to prevent it running dry on first start.
This same turbo also fits
Identifying the correct turbo reference for your Citroën Berlingo
Before placing any order, it is essential to check the reference printed on the label of your old turbocharger or in your vehicle's documents. This new turbo is compatible with the main reference 706976-5001S, a part found on the Citroën Berlingo 1 fitted with the 2.0 HDi diesel engine producing 90 hp. This light commercial and family vehicle made extensive use of this engine, which was valued for its robustness in both professional and everyday use.
Engine and engine code covered on the Berlingo
On this model, the new turbo fits the engine identified by the code RHY, corresponding to the technical designation DW10TD, a 1997 cm³ diesel unit. This engine block was fitted to a large number of Berlingo vehicles used for deliveries or family transport, often subjected to repeated demands in town and on the road alike. Before fitting, always check the number stamped on the casing of your original turbo to confirm exact compatibility with your vehicle.
Exchange basis and warranty for this new turbo
This new turbo is sold on an exchange basis: return of the old turbocharger is required, in accordance with our Terms and Conditions. It is only collected after the new turbo has been delivered and fitted, so that your Berlingo is not left off the road any longer than necessary. The part comes with a 12-month parts warranty, subject to fitting being carried out by a qualified professional. Payment can be spread over several instalments, in up to 10 instalments, to help manage your budget.
Common causes of failure on the Berlingo's RHY engine
On this DW10TD engine, premature turbo failure is most often caused by inadequate lubrication due to poor-quality oil or missed oil changes, a clogged air filter, or a cracked intercooler allowing contaminants to enter. Revving the engine hard immediately after a cold start also accelerates wear on the bearings.
Points to check before fitting the new turbo
Before fitting this new turbo to your Berlingo, check the condition of the oil circuit, the cleanliness of the intake hoses and air intake, and ensure there are no metal particles in the lubrication circuit. When starting up for the first time, pre-lubricating the turbo with oil is essential to prevent it running dry on first start.
This same turbo also fits
Frequently asked questions
Everything you need to know before ordering your part.
