New Isuzu Rodeo Turbo – Ref. VIDZ
- 100% secure online payment
- Delivery to your garage or home, anywhere in Europe
- 12-month parts warranty
- Reconditioned and checked turbo
- Part
- Turbo
- Part type
- New turbo
- Make
- Isuzu
- Model
- Rodeo
- Engine
- 2.8 TD
- Fuel
- Diesel
- Equivalent references
- VIDZ, 8973311850, 8973311851, 8973311852, VB420076, VB420076-VIDZ, 1118010802
- Warranty
- 12 months
An expert is here to help
Not sure you've found the right part?
The new turbo built for the Isuzu Rodeo 2.8 TD
The Isuzu Rodeo Pickup fitted with the 4JB1TC 2.8 TD engine is frequently used for mixed driving, sometimes with a load in the bed or while towing, which puts considerable strain on the turbocharger during hard acceleration and extended periods under load. This kind of professional or utility use — with frequent cold starts and short runs interspersed with more demanding stints — accelerates turbo wear if maintenance is not kept on top of. Fitting a new turbo compatible with the VIDZ reference restores reliable performance on this demanding vehicle.
Compatibility of the new turbo for the Isuzu Rodeo
This new turbo is compatible with the 2.8 TD engine fitted with the 4JB1TC unit on the Isuzu Rodeo Pickup. Before placing an order, it is essential to check the reference number on the old turbo to confirm exact compatibility with your vehicle.
Exchange basis and warranty for this Isuzu Rodeo turbo
This new turbo is sold on an exchange basis: return of the old turbo is required, in accordance with our Terms and Conditions. The return only takes place after the new turbo has been delivered and fitted, so the vehicle is not left off the road any longer than necessary. A 12-month parts warranty applies, subject to fitting being carried out by a qualified professional. Payment can be spread over up to 10 instalments.
Advice before fitting on the 4JB1TC engine
On this diesel engine, premature turbo failure is most commonly caused by insufficient lubrication due to poor-quality oil or missed oil changes, a clogged air filter allowing contaminants through, or a damaged intercooler upsetting the air pressure balance. Hard acceleration without allowing the engine to cool down can also weaken the turbo bearings. Before installation, check the oil circuit, the condition of the hoses, and the cleanliness of the air intake. When starting up for the first time, it is recommended to prime the new turbo with oil to ensure the bearings are lubricated immediately from the very first start.
This same turbo also fits
The new turbo built for the Isuzu Rodeo 2.8 TD
The Isuzu Rodeo Pickup fitted with the 4JB1TC 2.8 TD engine is frequently used for mixed driving, sometimes with a load in the bed or while towing, which puts considerable strain on the turbocharger during hard acceleration and extended periods under load. This kind of professional or utility use — with frequent cold starts and short runs interspersed with more demanding stints — accelerates turbo wear if maintenance is not kept on top of. Fitting a new turbo compatible with the VIDZ reference restores reliable performance on this demanding vehicle.
Compatibility of the new turbo for the Isuzu Rodeo
This new turbo is compatible with the 2.8 TD engine fitted with the 4JB1TC unit on the Isuzu Rodeo Pickup. Before placing an order, it is essential to check the reference number on the old turbo to confirm exact compatibility with your vehicle.
Exchange basis and warranty for this Isuzu Rodeo turbo
This new turbo is sold on an exchange basis: return of the old turbo is required, in accordance with our Terms and Conditions. The return only takes place after the new turbo has been delivered and fitted, so the vehicle is not left off the road any longer than necessary. A 12-month parts warranty applies, subject to fitting being carried out by a qualified professional. Payment can be spread over up to 10 instalments.
Advice before fitting on the 4JB1TC engine
On this diesel engine, premature turbo failure is most commonly caused by insufficient lubrication due to poor-quality oil or missed oil changes, a clogged air filter allowing contaminants through, or a damaged intercooler upsetting the air pressure balance. Hard acceleration without allowing the engine to cool down can also weaken the turbo bearings. Before installation, check the oil circuit, the condition of the hoses, and the cleanliness of the air intake. When starting up for the first time, it is recommended to prime the new turbo with oil to ensure the bearings are lubricated immediately from the very first start.
This same turbo also fits
Frequently asked questions
Everything you need to know before ordering your part.
