New Turbo Audi A4 – Ref. 04L253124
- 100% secure online payment
- Delivery to your garage or home, anywhere in Europe
- 12-month parts warranty
- Reconditioned and checked turbo
- Part
- Turbo
- Part type
- New turbo
- Make
- Audi
- Model
- A4
- Engine
- 2.0 TDI 190
- Fuel
- Diesel
- Equivalent references
- 04L253124, 04L253010A, 04L253010AV, 04L253010AX, 04L253010L, 04L253010LV, 04L253010LX, 04L253010N, 04L253010NV, 04L253010NX, 04L253010S, 04L253010SV, 04L253010SX, 04L253056C, 04L253056CV, 04L253056CX, 04L253056E, 04L253056EV, 04L253056EX, 04L253056F, 04L253056FV, 04L253056FX, 04L253056G, 04L253056GV, 04L253056GV100, 04L253056GX, 04L253056H, 04L253056HV, 04L253056HX, 04L253056J, 04L253056JV, 04L253056JX, 04L253056L, 04L253056LV, 04L253056LX, 04L253056M, 04L253056MV, 04L253056MX, 04L253124AV, 04L253124AX
- Warranty
- 12 months
An expert is here to help
Not sure you've found the right part?
Signs of a worn turbo on your Audi A4 2.0 TDI 190
On the Audi A4 fitted with the 2.0 TDI 190 engine, a turbo nearing the end of its life typically shows itself through a loss of power under acceleration, a high-pitched whistling noise that worsens with engine speed, blue or black exhaust smoke, and unusually high oil consumption. An illuminated engine warning light accompanied by the vehicle entering limp mode can also point to a boost pressure fault caused by turbocharger wear.
New turbo for the Audi A4 – overview
This new turbo is compatible with reference 04L253124, designed for the Audi A4 with the 2.0 TDI 190 diesel engine of 1968 cm³. The engine codes covered are CNHA, CNHC, CZJA, DDDA, DESA, DETA, DETB and DFHA. Before ordering, we recommend checking the exact reference printed on your old turbo to ensure perfect compatibility with your vehicle.
Exchange basis and warranty on the Audi A4
This new turbo is sold on an exchange basis: the old turbo must be returned, in accordance with our Terms and Conditions, but it is only collected after the new turbo has been delivered and fitted, so your Audi A4 is never left off the road. The part carries a 12-month parts warranty, subject to fitting by a qualified professional. Payment can be spread over up to 10 instalments.
Fitting advice for the 2.0 TDI 190
Turbo longevity depends heavily on the quality and frequency of engine oil changes, as well as the condition of the air filter and intercooler – any blockage or leak in these components accelerates bearing wear. Before fitting, check the oil circuit, the cleanliness of the intake and exhaust hoses, and the air intake for any foreign objects. On first start-up, prime the turbo with oil to ensure immediate bearing lubrication and prevent premature failure. Avoiding sharp rev increases immediately after a cold start will also help preserve this turbocharger over the long term.
This same turbo also fits
Signs of a worn turbo on your Audi A4 2.0 TDI 190
On the Audi A4 fitted with the 2.0 TDI 190 engine, a turbo nearing the end of its life typically shows itself through a loss of power under acceleration, a high-pitched whistling noise that worsens with engine speed, blue or black exhaust smoke, and unusually high oil consumption. An illuminated engine warning light accompanied by the vehicle entering limp mode can also point to a boost pressure fault caused by turbocharger wear.
New turbo for the Audi A4 – overview
This new turbo is compatible with reference 04L253124, designed for the Audi A4 with the 2.0 TDI 190 diesel engine of 1968 cm³. The engine codes covered are CNHA, CNHC, CZJA, DDDA, DESA, DETA, DETB and DFHA. Before ordering, we recommend checking the exact reference printed on your old turbo to ensure perfect compatibility with your vehicle.
Exchange basis and warranty on the Audi A4
This new turbo is sold on an exchange basis: the old turbo must be returned, in accordance with our Terms and Conditions, but it is only collected after the new turbo has been delivered and fitted, so your Audi A4 is never left off the road. The part carries a 12-month parts warranty, subject to fitting by a qualified professional. Payment can be spread over up to 10 instalments.
Fitting advice for the 2.0 TDI 190
Turbo longevity depends heavily on the quality and frequency of engine oil changes, as well as the condition of the air filter and intercooler – any blockage or leak in these components accelerates bearing wear. Before fitting, check the oil circuit, the cleanliness of the intake and exhaust hoses, and the air intake for any foreign objects. On first start-up, prime the turbo with oil to ensure immediate bearing lubrication and prevent premature failure. Avoiding sharp rev increases immediately after a cold start will also help preserve this turbocharger over the long term.
This same turbo also fits
Frequently asked questions
Everything you need to know before ordering your part.
