New Audi A7 Turbo – Ref. 839077-5011S
- 100% secure online payment
- Delivery to your garage or home, anywhere in Europe
- 12-month parts warranty
- Reconditioned and checked turbo
- Part
- Turbo
- Part type
- New turbo
- Make
- Audi
- Model
- A7
- Engine
- 3.0 TDI 211, 3.0 TDI 218, 3.0 TDI 272
- Fuel
- Diesel
- Reference
- 839077-5011S
- Warranty
- 12 months
An expert is here to help
Not sure you've found the right part?
Why does the turbo fail on the Audi A7 3.0 TDI?
On the Audi A7 fitted with the 3.0 TDI engine, the variable-geometry turbo is put under considerable strain during hard acceleration and extended motorway driving — both typical of how this saloon is used. Insufficient lubrication, degraded engine oil or oil changes left too long overdue, and a clogged air filter are the most common causes of premature wear to the turbo's bearings and shaft. Driving that puts the engine under heavy load without allowing a cooling-down period at idle before switching off can also accelerate deterioration of the turbo on these V6 diesel units.
New turbo compatible with reference 839077-5011S
This new turbo is compatible with reference 839077-5011S, intended for Audi A7 models fitted with the 3.0 TDI engine. Before placing an order, we recommend checking the reference number on your old turbo to confirm exact compatibility with your vehicle.
Exchange basis and warranty for this Audi A7 turbo
This turbo is sold on an exchange basis: in accordance with our Terms and Conditions, return of the old turbo is required. It is only collected after the new turbo has been delivered and fitted, so your Audi A7 is not left off the road during the process. The turbo comes with a 12-month parts warranty, subject to fitting being carried out by a qualified professional. Payment can be spread over multiple instalments, in up to 10 instalments.
Fitting advice for the Audi A7 turbo
Before installing the new turbo, several checks must be carried out on the Audi A7's 3.0 TDI engine:
- Check the oil circuit and replace both the engine oil and oil filter to ensure clean lubrication from the moment the engine is restarted.
- Inspect the hoses and air intake to rule out any risk of contamination or leaks that could affect turbo performance.
- Check the condition of the intercooler, which may retain oil deposits if the turbo has previously failed.
- Prime the turbo with oil before the first start-up to ensure the bearings are immediately lubricated.
These precautions will help preserve the longevity of the new turbo fitted to your Audi A7 3.0 TDI.
This same turbo also fits
Why does the turbo fail on the Audi A7 3.0 TDI?
On the Audi A7 fitted with the 3.0 TDI engine, the variable-geometry turbo is put under considerable strain during hard acceleration and extended motorway driving — both typical of how this saloon is used. Insufficient lubrication, degraded engine oil or oil changes left too long overdue, and a clogged air filter are the most common causes of premature wear to the turbo's bearings and shaft. Driving that puts the engine under heavy load without allowing a cooling-down period at idle before switching off can also accelerate deterioration of the turbo on these V6 diesel units.
New turbo compatible with reference 839077-5011S
This new turbo is compatible with reference 839077-5011S, intended for Audi A7 models fitted with the 3.0 TDI engine. Before placing an order, we recommend checking the reference number on your old turbo to confirm exact compatibility with your vehicle.
Exchange basis and warranty for this Audi A7 turbo
This turbo is sold on an exchange basis: in accordance with our Terms and Conditions, return of the old turbo is required. It is only collected after the new turbo has been delivered and fitted, so your Audi A7 is not left off the road during the process. The turbo comes with a 12-month parts warranty, subject to fitting being carried out by a qualified professional. Payment can be spread over multiple instalments, in up to 10 instalments.
Fitting advice for the Audi A7 turbo
Before installing the new turbo, several checks must be carried out on the Audi A7's 3.0 TDI engine:
- Check the oil circuit and replace both the engine oil and oil filter to ensure clean lubrication from the moment the engine is restarted.
- Inspect the hoses and air intake to rule out any risk of contamination or leaks that could affect turbo performance.
- Check the condition of the intercooler, which may retain oil deposits if the turbo has previously failed.
- Prime the turbo with oil before the first start-up to ensure the bearings are immediately lubricated.
These precautions will help preserve the longevity of the new turbo fitted to your Audi A7 3.0 TDI.
This same turbo also fits
Frequently asked questions
Everything you need to know before ordering your part.
