New IVECO Daily Turbo – Ref. 53039880089
- 100% secure online payment
- Delivery to your garage or home, anywhere in Europe
- 12-month parts warranty
- Reconditioned and checked turbo
- Part
- Turbo
- Part type
- New turbo
- Make
- IVECO
- Model
- Daily
- Engine
- 2.3 TD 96 ch, 2.3 TD 110 ch, 2.3 TD 116 ch
- Fuel
- Diesel
- Equivalent references
- 53039880089, 504014911, 504071262
- Warranty
- 12 months
An expert is here to help
Not sure you've found the right part?
Why does the turbo on the IVECO Daily III 2.3 TD fail?
On the IVECO Daily III fitted with the 2.3 TD diesel engine, the turbocharger is put under considerable strain due to the demands of typical commercial use: frequent short urban runs, heavy delivery loads, and the engine being switched off immediately after motorway driving. These conditions promote carbon build-up (coking) in the turbo, particularly when oil changes are not carried out with a suitable quality oil or service intervals are not observed. A clogged air filter or a dirty intercooler can also disrupt airflow and accelerate wear on the turbo's bearings and shaft.
Compatibility of the turbo with your IVECO Daily
This new turbo is compatible with reference 53039880089, intended for IVECO Daily III models powered by the 2.3 TD engine, in 96 hp, 110 hp or 116 hp versions. Before ordering, it is strongly recommended that you check the reference number on your old turbo or on the vehicle's identification plate to confirm an exact match with your engine.
Exchange basis and warranty on this turbo
This new turbo for the IVECO Daily III is sold on an exchange basis: return of the old turbo is required, in accordance with our Terms and Conditions. It is only collected after the new turbo has been delivered and fitted, so your vehicle is not left off the road during the process. The part carries a 12-month parts warranty, subject to fitting being carried out by a qualified professional. Payment for your order can be spread over several instalments, in up to 10 instalments.
Fitting advice for your Daily turbo
Before installing the new turbo, check the condition of the oil circuit (hoses, feed and return lines) and ensure the air intake is clean, to prevent any premature contamination of the new component. Priming the turbo with oil before the engine is started for the first time is essential to ensure immediate lubrication of the bearings. Remember also to replace the oil filter and use an engine oil that meets the manufacturer's specifications — both are key to the longevity of your new turbo.
Why does the turbo on the IVECO Daily III 2.3 TD fail?
On the IVECO Daily III fitted with the 2.3 TD diesel engine, the turbocharger is put under considerable strain due to the demands of typical commercial use: frequent short urban runs, heavy delivery loads, and the engine being switched off immediately after motorway driving. These conditions promote carbon build-up (coking) in the turbo, particularly when oil changes are not carried out with a suitable quality oil or service intervals are not observed. A clogged air filter or a dirty intercooler can also disrupt airflow and accelerate wear on the turbo's bearings and shaft.
Compatibility of the turbo with your IVECO Daily
This new turbo is compatible with reference 53039880089, intended for IVECO Daily III models powered by the 2.3 TD engine, in 96 hp, 110 hp or 116 hp versions. Before ordering, it is strongly recommended that you check the reference number on your old turbo or on the vehicle's identification plate to confirm an exact match with your engine.
Exchange basis and warranty on this turbo
This new turbo for the IVECO Daily III is sold on an exchange basis: return of the old turbo is required, in accordance with our Terms and Conditions. It is only collected after the new turbo has been delivered and fitted, so your vehicle is not left off the road during the process. The part carries a 12-month parts warranty, subject to fitting being carried out by a qualified professional. Payment for your order can be spread over several instalments, in up to 10 instalments.
Fitting advice for your Daily turbo
Before installing the new turbo, check the condition of the oil circuit (hoses, feed and return lines) and ensure the air intake is clean, to prevent any premature contamination of the new component. Priming the turbo with oil before the engine is started for the first time is essential to ensure immediate lubrication of the bearings. Remember also to replace the oil filter and use an engine oil that meets the manufacturer's specifications — both are key to the longevity of your new turbo.
Frequently asked questions
Everything you need to know before ordering your part.