New SEAT Leon Turbo – Ref. 53039880207
- 100% secure online payment
- Delivery to your garage or home, anywhere in Europe
- 12-month parts warranty
- Reconditioned and checked turbo
- Part
- Turbo
- Part type
- New turbo
- Make
- SEAT
- Model
- Leon
- Engine
- 2.0 TDI 170 CV
- Fuel
- Diesel
- Equivalent references
- 53039880207, 03L253010D, 03L253010DV, 03L253010DX, 03L253016G, 03L253016GV, 03L253016GX, 03L253019C, 03L253019CV, 03L253019CX, 03L253019K, 03L253019KV, 03L253019KX, 03L253019M, 03L253019MV, 03L253019MX, 03L253056C, 03L253056CU, 03L253056CV, 03L253056CX
- Warranty
- 12 months
An expert is here to help
Not sure you've found the right part?
Diagnosing a failing turbo on a SEAT Leon 2.0 TDI 170 CV before replacement
Before considering a turbo replacement on your SEAT Leon 2.0 TDI 170 CV, an accurate diagnosis is essential. A diagnostic scan tool can detect any fault codes related to boost or boost pressure. You should also carry out a visual inspection of the turbo, checking for excessive shaft play, oil traces in the intake or exhaust hoses, and listening for unusual noises (whistling, rumbling) that often accompany worn bearings. A noticeable loss of power, blue smoke from the exhaust, or excessive oil consumption are common signs of failure on this engine.
Compatibility of the new turbo for the SEAT Leon 2.0 TDI 170 CV
This new turbo is compatible with reference 53039880207, intended for the SEAT Leon fitted with the 2.0 TDI engine producing 170 CV, with an engine capacity of 1968 cm3. It covers engines identified by the engine codes BMN, CEGA and CFJA. Before ordering, we recommend checking the reference on the data plate of the old turbo or on the vehicle's registration document, to ensure an exact match with your engine.
Exchange and warranty for this SEAT Leon turbo
This turbo is sold on an exchange basis: return of the old turbo is required, in accordance with our Terms and Conditions. It is only collected after the new turbo has been delivered and fitted, so your SEAT Leon is not left off the road during the process. A 12-month parts warranty applies, subject to fitting being carried out by a professional. Payment can be spread over several instalments, in up to 10 instalments.
Fitting and maintenance advice to protect your turbo
On the 2.0 TDI 170 CV, premature turbo failure is most often caused by a lubrication fault: poor-quality oil, missed oil changes, or a clogged oil filter. A blocked air filter or a damaged intercooler can also disrupt turbo operation and accelerate wear. Before fitting, check the oil circuit, the condition of the hoses, and that there are no air intake leaks. On first start-up, it is advisable to prime the turbo with oil to ensure immediate lubrication of the bearings, then drive gently for the first few kilometres.
This same turbo also fits
Diagnosing a failing turbo on a SEAT Leon 2.0 TDI 170 CV before replacement
Before considering a turbo replacement on your SEAT Leon 2.0 TDI 170 CV, an accurate diagnosis is essential. A diagnostic scan tool can detect any fault codes related to boost or boost pressure. You should also carry out a visual inspection of the turbo, checking for excessive shaft play, oil traces in the intake or exhaust hoses, and listening for unusual noises (whistling, rumbling) that often accompany worn bearings. A noticeable loss of power, blue smoke from the exhaust, or excessive oil consumption are common signs of failure on this engine.
Compatibility of the new turbo for the SEAT Leon 2.0 TDI 170 CV
This new turbo is compatible with reference 53039880207, intended for the SEAT Leon fitted with the 2.0 TDI engine producing 170 CV, with an engine capacity of 1968 cm3. It covers engines identified by the engine codes BMN, CEGA and CFJA. Before ordering, we recommend checking the reference on the data plate of the old turbo or on the vehicle's registration document, to ensure an exact match with your engine.
Exchange and warranty for this SEAT Leon turbo
This turbo is sold on an exchange basis: return of the old turbo is required, in accordance with our Terms and Conditions. It is only collected after the new turbo has been delivered and fitted, so your SEAT Leon is not left off the road during the process. A 12-month parts warranty applies, subject to fitting being carried out by a professional. Payment can be spread over several instalments, in up to 10 instalments.
Fitting and maintenance advice to protect your turbo
On the 2.0 TDI 170 CV, premature turbo failure is most often caused by a lubrication fault: poor-quality oil, missed oil changes, or a clogged oil filter. A blocked air filter or a damaged intercooler can also disrupt turbo operation and accelerate wear. Before fitting, check the oil circuit, the condition of the hoses, and that there are no air intake leaks. On first start-up, it is advisable to prime the turbo with oil to ensure immediate lubrication of the bearings, then drive gently for the first few kilometres.
This same turbo also fits
Frequently asked questions
Everything you need to know before ordering your part.
