New Fiat Ducato Turbo – Ref. 798128-5006S
- 100% secure online payment
- Delivery to your garage or home, anywhere in Europe
- 12-month parts warranty
- Reconditioned and checked turbo
- Part
- Turbo
- Part type
- New turbo
- Make
- Fiat
- Model
- Ducato
- Engine
- 2.2 HDi 110, 2.2 HDi 131, 2.2 HDi 150
- Fuel
- Diesel
- Reference
- 798128-5006S, 1651753180, 2361357, 798128-5009S, 9676934380, 9802446680, CU3Q6K682BA, CU3Q6K682BB, KK3Q-6K682-BA
- Warranty
- 12 months
An expert is here to help
Not sure you've found the right part?
Diagnosing a turbo fault on your Fiat Ducato 2.2 HDi before any replacement
Before ordering a new turbo for your Fiat Ducato, it is essential to confirm that the turbo is actually the cause of the problem. On the 2.2 HDi engines fitted to the Ducato III, a loss of power under acceleration, persistent blue or black exhaust smoke, an unusual whistling noise from under the bonnet, or an illuminated engine warning light are all characteristic signs. Checking the boost pressure and visually inspecting the turbo vanes, shaft end-float and oil condition will help rule out a simple sensor or hose fault before committing to a turbocharger replacement.
New turbo for the Fiat Ducato III 2.2 HDi
This new turbo is compatible with reference 798128-5006S and is intended for Fiat Ducato III vehicles fitted with the 2.2 HDi 110, 2.2 HDi 131 and 2.2 HDi 150 engines, associated with engine codes 4H03, 4HG, 4HH and 4HJ, in diesel, with an engine capacity of 2198 cm3. This panel van, widely used for goods transport or leisure vehicle conversions, places considerable demands on its turbocharger during loaded runs or intensive use, making this component particularly susceptible to wear.
Before confirming your order, we recommend checking the reference printed on your old turbo to confirm exact compatibility with your vehicle, as 798128 variants may differ depending on the exhaust manifold specification.
Equivalent references
- 1651753180
- 2361357
- 798128-5006S
- 798128-5009S
- 9676934380
- 9802446680
- CU3Q6K682BA
- CU3Q6K682BB
- KK3Q-6K682-BA
Exchange basis and warranty for this Ducato turbo
This new turbo is sold on an exchange basis: in accordance with our Terms and Conditions, return of the old turbo is required, but it is only collected after the new turbo has been delivered and fitted, so your Ducato is not left off the road. The part is covered by a 12-month parts warranty, subject to fitting being carried out by a qualified professional. Payment can be spread over several instalments, in up to 10 instalments.
Tips for protecting your new Fiat Ducato 2.2 HDi turbo
On these diesel engines, premature turbo failure is often caused by inadequate lubrication due to degraded oil or missed oil changes, a clogged air filter, or a damaged intercooler allowing contaminants through. Aggressive driving with immediate high-revving after a cold start also accelerates bearing wear.
- Check the oil circuit, intake hoses and air intake before fitting
- Ensure there are no blockages or deposits in the ducts
- Prime the turbo with oil before first start-up
- Allow the engine to warm up and cool down gradually to protect the bearings
Diagnosing a turbo fault on your Fiat Ducato 2.2 HDi before any replacement
Before ordering a new turbo for your Fiat Ducato, it is essential to confirm that the turbo is actually the cause of the problem. On the 2.2 HDi engines fitted to the Ducato III, a loss of power under acceleration, persistent blue or black exhaust smoke, an unusual whistling noise from under the bonnet, or an illuminated engine warning light are all characteristic signs. Checking the boost pressure and visually inspecting the turbo vanes, shaft end-float and oil condition will help rule out a simple sensor or hose fault before committing to a turbocharger replacement.
New turbo for the Fiat Ducato III 2.2 HDi
This new turbo is compatible with reference 798128-5006S and is intended for Fiat Ducato III vehicles fitted with the 2.2 HDi 110, 2.2 HDi 131 and 2.2 HDi 150 engines, associated with engine codes 4H03, 4HG, 4HH and 4HJ, in diesel, with an engine capacity of 2198 cm3. This panel van, widely used for goods transport or leisure vehicle conversions, places considerable demands on its turbocharger during loaded runs or intensive use, making this component particularly susceptible to wear.
Before confirming your order, we recommend checking the reference printed on your old turbo to confirm exact compatibility with your vehicle, as 798128 variants may differ depending on the exhaust manifold specification.
Equivalent references
- 1651753180
- 2361357
- 798128-5006S
- 798128-5009S
- 9676934380
- 9802446680
- CU3Q6K682BA
- CU3Q6K682BB
- KK3Q-6K682-BA
Exchange basis and warranty for this Ducato turbo
This new turbo is sold on an exchange basis: in accordance with our Terms and Conditions, return of the old turbo is required, but it is only collected after the new turbo has been delivered and fitted, so your Ducato is not left off the road. The part is covered by a 12-month parts warranty, subject to fitting being carried out by a qualified professional. Payment can be spread over several instalments, in up to 10 instalments.
Tips for protecting your new Fiat Ducato 2.2 HDi turbo
On these diesel engines, premature turbo failure is often caused by inadequate lubrication due to degraded oil or missed oil changes, a clogged air filter, or a damaged intercooler allowing contaminants through. Aggressive driving with immediate high-revving after a cold start also accelerates bearing wear.
- Check the oil circuit, intake hoses and air intake before fitting
- Ensure there are no blockages or deposits in the ducts
- Prime the turbo with oil before first start-up
- Allow the engine to warm up and cool down gradually to protect the bearings
Frequently asked questions
Everything you need to know before ordering your part.
