New Fiat Panda 1.3 Multijet Turbo – Ref. 55266961
- 100% secure online payment
- Delivery to your garage or home, anywhere in Europe
- 12-month parts warranty
- Reconditioned and checked turbo
- Part
- Turbo
- Part type
- New turbo
- Make
- Fiat
- Model
- Panda
- Engine
- 1.3 Multijet 78 hp, 1.3 Multijet 95 hp
- Fuel
- Diesel
- Equivalent references
- 55266961, 55278597, 71797247, 828578-5004S
- Warranty
- 12 months
An expert is here to help
Not sure you've found the right part?
New Turbo 55266961 – Fiat Panda 1.3 Multijet
The new turbo 55266961 is designed to fit the Fiat Panda with the 1.3 Multijet Diesel engine. This turbocharger manages the engine's boost pressure and plays a direct role in the correct operation of the drivetrain on this Italian city car, which is heavily used in urban and suburban driving where the turbo is subject to frequent thermal stress.
On the Panda's 1.3 Multijet, turbo failures most commonly stem from inadequate lubrication caused by degraded engine oil or missed oil changes, leading to premature wear of the bearings and shaft end-float. A clogged air filter, a cracked intake hose or a punctured intercooler can also allow particles to enter or cause a pressure drop that weakens the turbine. Driving habits that involve sharp acceleration immediately after a cold start – before the oil has had time to circulate properly – also accelerate wear on this component in this model.
Compatibility of the New Turbo with the Fiat Panda
This new turbo is compatible with reference 55266961, as well as with the equivalent OEM and aftermarket references associated with this model. Before placing an order, it is recommended that you check the reference number on the old turbo or on the vehicle's identification plate to confirm an exact match with the 1.3 Multijet engine fitted to the Panda.
Warranty and Delivery of the New Turbo
This new turbo is sold as a straightforward purchase: no old part needs to be returned, no collection of the old turbo is required, and a single delivery is all it takes to receive the part. It comes with a 12-month parts warranty, subject to fitting by a qualified professional. Payment can be spread over up to 10 instalments.
Fitting Advice for the Fiat Panda
Before fitting this new turbo to the Panda, you should check the oil circuit, replace the oil filter, and inspect the condition of the intake hoses and air intake to prevent premature contamination. Pre-lubricating the turbo with oil before the first start is also recommended to ensure immediate bearing lubrication and protect the longevity of the new part.
- Check the reference on the old turbo before ordering
- Inspect the oil circuit and hoses before fitting
- Pre-lubricate with oil before starting the engine
- Monitor the air filter and intercooler condition
New Turbo 55266961 – Fiat Panda 1.3 Multijet
The new turbo 55266961 is designed to fit the Fiat Panda with the 1.3 Multijet Diesel engine. This turbocharger manages the engine's boost pressure and plays a direct role in the correct operation of the drivetrain on this Italian city car, which is heavily used in urban and suburban driving where the turbo is subject to frequent thermal stress.
On the Panda's 1.3 Multijet, turbo failures most commonly stem from inadequate lubrication caused by degraded engine oil or missed oil changes, leading to premature wear of the bearings and shaft end-float. A clogged air filter, a cracked intake hose or a punctured intercooler can also allow particles to enter or cause a pressure drop that weakens the turbine. Driving habits that involve sharp acceleration immediately after a cold start – before the oil has had time to circulate properly – also accelerate wear on this component in this model.
Compatibility of the New Turbo with the Fiat Panda
This new turbo is compatible with reference 55266961, as well as with the equivalent OEM and aftermarket references associated with this model. Before placing an order, it is recommended that you check the reference number on the old turbo or on the vehicle's identification plate to confirm an exact match with the 1.3 Multijet engine fitted to the Panda.
Warranty and Delivery of the New Turbo
This new turbo is sold as a straightforward purchase: no old part needs to be returned, no collection of the old turbo is required, and a single delivery is all it takes to receive the part. It comes with a 12-month parts warranty, subject to fitting by a qualified professional. Payment can be spread over up to 10 instalments.
Fitting Advice for the Fiat Panda
Before fitting this new turbo to the Panda, you should check the oil circuit, replace the oil filter, and inspect the condition of the intake hoses and air intake to prevent premature contamination. Pre-lubricating the turbo with oil before the first start is also recommended to ensure immediate bearing lubrication and protect the longevity of the new part.
- Check the reference on the old turbo before ordering
- Inspect the oil circuit and hoses before fitting
- Pre-lubricate with oil before starting the engine
- Monitor the air filter and intercooler condition
Frequently asked questions
Everything you need to know before ordering your part.
