New SEAT Exeo 2.0 TDI Turbo – Ref. 818988-5002S
- 100% secure online payment
- Delivery to your garage or home, anywhere in Europe
- 12-month parts warranty
- Reconditioned and checked turbo
- Part
- Turbo
- Part type
- New turbo
- Make
- SEAT
- Model
- Exeo
- Engine
- 2.0 TDI 120, 2.0 TDI 143
- Fuel
- Diesel
- Equivalent references
- 818988-5002S, 818988-5001S, 818989-5001S
- Warranty
- 12 months
An expert is here to help
Not sure you've found the right part?
Identifying the correct turbo reference for your SEAT Exeo
Before placing an order, it is essential to check the reference number stamped on your SEAT Exeo's original turbo, as several variants may have been fitted depending on the engine and year of manufacture. This new turbo is compatible with reference 818988-5002S, a part commonly fitted to diesel Exeo saloons and estates. Comparing the numbers engraved on the original turbo housing with the references listed on this page will help you avoid any ordering errors.
SEAT Exeo engines covered by this turbo
On the SEAT Exeo, this turbo is compatible with the 2.0 TDI 120 engines producing 120 hp and 143 hp, with an engine capacity of 1968 cm³. The associated engine codes are CGLE, CJCA, CJCB, CJCC, CJCD, CMFA and CMFB. These diesel units are fitted to both the Exeo saloon and the ST estate, and are known for their fuel efficiency as much as for their sensitivity to oil and air circuit maintenance.
Warranty and delivery for the Exeo turbo
This new turbo is sold as a straightforward purchase with no unit to return — delivery is made in a single shipment. The part carries a 12-month parts warranty, subject to fitting by a qualified professional. Payment can be spread over up to 10 instalments to make your purchase easier.
Common causes of turbo failure on the Exeo 2.0 TDI engines
Premature turbo failure on these diesel engines is most often caused by insufficient lubrication due to unsuitable oil quality or missed oil changes, a clogged air filter, or a damaged intercooler allowing contaminants through. Switching the engine off immediately after sustained use, without allowing it to cool down, can also accelerate wear on the turbo bearings.
Advice before fitting the turbo to your Exeo
Before installing this turbo, compatible with reference 818988-5002S, it is recommended that you check the oil circuit, the condition of the hoses, and the cleanliness of the engine air intake. Pre-lubricating the turbo with oil before the first engine start ensures immediate lubrication of the bearings and helps extend the life of the part.
This same turbo also fits
Identifying the correct turbo reference for your SEAT Exeo
Before placing an order, it is essential to check the reference number stamped on your SEAT Exeo's original turbo, as several variants may have been fitted depending on the engine and year of manufacture. This new turbo is compatible with reference 818988-5002S, a part commonly fitted to diesel Exeo saloons and estates. Comparing the numbers engraved on the original turbo housing with the references listed on this page will help you avoid any ordering errors.
SEAT Exeo engines covered by this turbo
On the SEAT Exeo, this turbo is compatible with the 2.0 TDI 120 engines producing 120 hp and 143 hp, with an engine capacity of 1968 cm³. The associated engine codes are CGLE, CJCA, CJCB, CJCC, CJCD, CMFA and CMFB. These diesel units are fitted to both the Exeo saloon and the ST estate, and are known for their fuel efficiency as much as for their sensitivity to oil and air circuit maintenance.
Warranty and delivery for the Exeo turbo
This new turbo is sold as a straightforward purchase with no unit to return — delivery is made in a single shipment. The part carries a 12-month parts warranty, subject to fitting by a qualified professional. Payment can be spread over up to 10 instalments to make your purchase easier.
Common causes of turbo failure on the Exeo 2.0 TDI engines
Premature turbo failure on these diesel engines is most often caused by insufficient lubrication due to unsuitable oil quality or missed oil changes, a clogged air filter, or a damaged intercooler allowing contaminants through. Switching the engine off immediately after sustained use, without allowing it to cool down, can also accelerate wear on the turbo bearings.
Advice before fitting the turbo to your Exeo
Before installing this turbo, compatible with reference 818988-5002S, it is recommended that you check the oil circuit, the condition of the hoses, and the cleanliness of the engine air intake. Pre-lubricating the turbo with oil before the first engine start ensures immediate lubrication of the bearings and helps extend the life of the part.
This same turbo also fits
Frequently asked questions
Everything you need to know before ordering your part.
