New Kia Rio Turbo – Ref. 856652-5001S
- 100% secure online payment
- Delivery to your garage or home, anywhere in Europe
- 12-month parts warranty
- Reconditioned and checked turbo
- Part
- Turbo
- Part type
- New turbo
- Make
- Kia
- Model
- Rio
- Engine
- 1.0 T-GDI 100/120 ch
- Fuel
- Petrol
- Equivalent references
- 856652-5001S, 2523104500, 28231-04560, 2823104500
- Warranty
- 12 months
An expert is here to help
Not sure you've found the right part?
Signs of a worn turbo on the Kia Rio 1.0 T-GDI
On the Kia Rio fitted with the 1.0 T-GDI petrol engine, a turbo nearing the end of its life typically shows itself through a loss of power under acceleration, an unusual whistling noise from the engine bay, blue or black exhaust smoke, an illuminated engine warning light, or excessive oil consumption. These symptoms generally point to wear of the central bearing, an oil leak into the intake or exhaust, or excessive play in the turbine shaft. On this compact city car, frequently used in stop-start urban conditions, turbo lubrication is particularly sensitive to short warm-up cycles.
New turbo for the Kia Rio – Overview
This new turbo is compatible with reference 856652-5001S, designed for the 1.0 T-GDI petrol engines of the Kia Rio. It is a brand-new part, engineered to restore the original boost pressure and return the performance expected from this turbocharged three-cylinder engine.
Engine compatibility and reference check
This turbo covers the 1.0 T-GDI engines in 100 and 120 hp outputs, associated with engine codes G3LC, G3LE and G3LF depending on the variant. Before placing an order, we recommend checking the reference printed on the old turbo or on the engine plate to confirm exact compatibility with your vehicle.
Exchange basis and warranty
This part is sold on an exchange basis: return of the old turbo is required, in accordance with our Terms and Conditions. It is only collected after the new turbo has been delivered and fitted, so your vehicle is not left off the road. The new turbo is covered by a 12-month parts warranty, subject to fitting being carried out by a qualified professional.
Fitting advice for the Kia Rio 1.0 T-GDI
Before installation, several points deserve particular attention:
- Check the oil circuit (pressure and cleanliness) and replace the oil filter.
- Inspect the oil hoses and air intake to prevent any contamination.
- Check the intercooler and air filter, which are often responsible for premature failure if clogged.
- Pre-lubricate the turbo with oil before starting the engine for the first time.
- Drive gently after fitting, allowing the engine to warm up fully before any hard use.
Your order can be paid in instalments, in up to 10 instalments.
This same turbo also fits
Signs of a worn turbo on the Kia Rio 1.0 T-GDI
On the Kia Rio fitted with the 1.0 T-GDI petrol engine, a turbo nearing the end of its life typically shows itself through a loss of power under acceleration, an unusual whistling noise from the engine bay, blue or black exhaust smoke, an illuminated engine warning light, or excessive oil consumption. These symptoms generally point to wear of the central bearing, an oil leak into the intake or exhaust, or excessive play in the turbine shaft. On this compact city car, frequently used in stop-start urban conditions, turbo lubrication is particularly sensitive to short warm-up cycles.
New turbo for the Kia Rio – Overview
This new turbo is compatible with reference 856652-5001S, designed for the 1.0 T-GDI petrol engines of the Kia Rio. It is a brand-new part, engineered to restore the original boost pressure and return the performance expected from this turbocharged three-cylinder engine.
Engine compatibility and reference check
This turbo covers the 1.0 T-GDI engines in 100 and 120 hp outputs, associated with engine codes G3LC, G3LE and G3LF depending on the variant. Before placing an order, we recommend checking the reference printed on the old turbo or on the engine plate to confirm exact compatibility with your vehicle.
Exchange basis and warranty
This part is sold on an exchange basis: return of the old turbo is required, in accordance with our Terms and Conditions. It is only collected after the new turbo has been delivered and fitted, so your vehicle is not left off the road. The new turbo is covered by a 12-month parts warranty, subject to fitting being carried out by a qualified professional.
Fitting advice for the Kia Rio 1.0 T-GDI
Before installation, several points deserve particular attention:
- Check the oil circuit (pressure and cleanliness) and replace the oil filter.
- Inspect the oil hoses and air intake to prevent any contamination.
- Check the intercooler and air filter, which are often responsible for premature failure if clogged.
- Pre-lubricate the turbo with oil before starting the engine for the first time.
- Drive gently after fitting, allowing the engine to warm up fully before any hard use.
Your order can be paid in instalments, in up to 10 instalments.
This same turbo also fits
Frequently asked questions
Everything you need to know before ordering your part.
