Reconditioned Peugeot 2008 1.6 HDi Gearbox – 5-Speed Manual – Ref. 20ET16
- 100% secure online payment
- Delivery to your garage or home, anywhere in Europe
- 24-month parts warranty
- Reconditioned and bench-tested
- Part
- Gearbox
- Part type
- 5-Speed Manual
- Make
- Peugeot
- Model
- 2008
- Engine
- 1.6 HDi
- Fuel
- Diesel
- Reference
- 20ET16
- Warranty
- 24 months
An expert is here to help
Not sure you've found the right part?
Reconditioned Peugeot 2008 1.6 HDi Gearbox – Reference 20ET16
This reconditioned gearbox fits the Peugeot 2008 equipped with the 1.6 HDi engine of 1560 cm³, compatible with engine codes 9HP (DV6DTED) and 9H06, and corresponds to reference 20ET16. It is designed to restore the original gear-change quality on this diesel model, which is well regarded for its reliability but whose 5-speed manual gearbox can wear prematurely depending on urban or motorway use. The reconditioning of reference 20ET16 involves a full strip-down, thorough cleaning and inspection of every component, replacement of internal wear parts such as gears, synchros, bearings and seals, followed by reassembly to manufacturer tolerances and a bench test to confirm correct operation before dispatch.
Signs that your manual gearbox needs replacing
Several warning signs can indicate that the 5-speed manual gearbox on the Peugeot 2008 1.6 HDi is failing: stiff or crunching gear changes, clunking when downshifting, juddering under acceleration, vibrations felt in neutral, abnormal resistance when selecting reverse, or an oil leak from the casing. Difficulty engaging reverse when cold, or a neutral that does not release cleanly, can also point to a worn synchro inside the casing. A persistent low rumble while driving, particularly under load or on hills, often signals advanced internal wear that warrants replacing the unit rather than attempting a repair.
Exchange basis: the reconditioned unit is dispatched before the old one is collected
This gearbox, rebuilt to 0 km, is sold on an exchange basis: the old unit is not collected before delivery. The reconditioned gearbox is dispatched first so that the garage is never left without a part and the vehicle is not left on the ramp. The old gearbox, with its casing intact, is only collected after the 20ET16 has been delivered and fitted. Return of the old unit is required, in accordance with our Terms and Conditions.
Compatibility
This gearbox, referenced 20ET16, is compatible with Peugeot 2008 1.6 HDi engines identified by engine codes 9HP (DV6DTED) and 9H06.
Warranty and payment
This gearbox is sold with a 24-month parts warranty, subject to fitting by a qualified professional. Payment can be spread over several instalments, with up to 10 instalments available.
EDEN BOITES supports you from quote through to collection of the old unit.
Compatible vehicles (ref. 20ET16)
This reference also fits:
Reconditioned Peugeot 2008 1.6 HDi Gearbox – Reference 20ET16
This reconditioned gearbox fits the Peugeot 2008 equipped with the 1.6 HDi engine of 1560 cm³, compatible with engine codes 9HP (DV6DTED) and 9H06, and corresponds to reference 20ET16. It is designed to restore the original gear-change quality on this diesel model, which is well regarded for its reliability but whose 5-speed manual gearbox can wear prematurely depending on urban or motorway use. The reconditioning of reference 20ET16 involves a full strip-down, thorough cleaning and inspection of every component, replacement of internal wear parts such as gears, synchros, bearings and seals, followed by reassembly to manufacturer tolerances and a bench test to confirm correct operation before dispatch.
Signs that your manual gearbox needs replacing
Several warning signs can indicate that the 5-speed manual gearbox on the Peugeot 2008 1.6 HDi is failing: stiff or crunching gear changes, clunking when downshifting, juddering under acceleration, vibrations felt in neutral, abnormal resistance when selecting reverse, or an oil leak from the casing. Difficulty engaging reverse when cold, or a neutral that does not release cleanly, can also point to a worn synchro inside the casing. A persistent low rumble while driving, particularly under load or on hills, often signals advanced internal wear that warrants replacing the unit rather than attempting a repair.
Exchange basis: the reconditioned unit is dispatched before the old one is collected
This gearbox, rebuilt to 0 km, is sold on an exchange basis: the old unit is not collected before delivery. The reconditioned gearbox is dispatched first so that the garage is never left without a part and the vehicle is not left on the ramp. The old gearbox, with its casing intact, is only collected after the 20ET16 has been delivered and fitted. Return of the old unit is required, in accordance with our Terms and Conditions.
Compatibility
This gearbox, referenced 20ET16, is compatible with Peugeot 2008 1.6 HDi engines identified by engine codes 9HP (DV6DTED) and 9H06.
Warranty and payment
This gearbox is sold with a 24-month parts warranty, subject to fitting by a qualified professional. Payment can be spread over several instalments, with up to 10 instalments available.
EDEN BOITES supports you from quote through to collection of the old unit.
Compatible vehicles (ref. 20ET16)
This reference also fits:
Frequently asked questions
Everything you need to know before ordering your part.
3 options, 1 obvious choice
Compare what you really get for your money.
EDEN reconditioned
Up to 3× cheaper than new
- Rebuilt to 0 km
- Tested & certified
- Wear parts replaced with new
- Up to 24-month warranty
- Pay in up to 10 instalments
- Simple, fast exchange process
- Compatibility checked by an expert
- After-sales & advisers in France
- Fast delivery throughout France
- Circular economy, better for the planet
New part
€€€ · up to 3× more expensive
- Maximum reliability
- Manufacturer's warranty
- Full price, no discount
- Sometimes long lead times
- Rarely worth it on an older vehicle
- New manufacturing = heavy on the planet
Used
€ · a lottery
- Unknown mileage
- Not inspected
- No warranty
- Unpredictable price
- Risk of early failure
- Uncertain compatibility
- No after-sales, no follow-up
- Can end up costing twice as much