Reconditioned Peugeot 308 2.0 HDi Engine – Bare Engine – Ref. UBGA
- 100% secure online payment
- Delivery to your garage or home, anywhere in Europe
- 24-month parts warranty
- Reconditioned and bench-tested
- Part
- Engine
- Part type
- Bare Engine
- Make
- Peugeot
- Model
- 308
- Engine
- 2.0 HDi
- Fuel
- Diesel
- Reference
- UBGA
- Warranty
- 24 months
- Feature
- BARE ENGINE
An expert is here to help
Not sure you've found the right part?
Reconditioned Peugeot 308 2.0 HDi UBGA Engine
This reconditioned engine for the Peugeot 308 2.0 HDi, with an engine capacity of 1997 cm³, corresponds to engine code UBGA and reference UBGA. It is sold on an exchange basis to restore your vehicle's performance to factory standards at a fraction of the cost of a new engine. Reconditioning follows a rigorous process: the engine is fully stripped down, every component is cleaned and inspected, worn internal parts are replaced as required, and the unit is then reassembled to manufacturer tolerances and bench-tested before dispatch.
Signs That Your Engine Needs Replacing
Several warning signs should alert the owner of a 308 fitted with the 2.0 HDi: a noticeable loss of power under acceleration, abnormal exhaust smoke, unusual metallic noise at idle, an engine warning light that stays on, excessive fuel consumption, or difficulty starting from cold. Persistent knocking or a loss of compression may also indicate that the original block has reached the end of its serviceable life and that a full replacement is needed rather than a one-off repair.
Exchange Basis: Keeping Your Workshop Running
The reconditioned engine reference UBGA is supplied as a bare engine; the exact list of components included is specified on the quote. Under the deferred exchange arrangement, the old unit is not collected before delivery: the reconditioned engine is dispatched to you first, so your workshop is never left without a part and the vehicle is not left off the road. The old unit, block intact, is only collected after delivery and installation of the new engine; its return is required in accordance with the Terms and Conditions. This arrangement allows trade customers to meet the turnaround times promised to their own clients.
A deposit is required at the time of ordering; it is refunded after delivery, installation, and the return and receipt of the old unit.
Compatibility
This reconditioned engine, reference UBGA, corresponds to engine code UBGA as fitted to the Peugeot 308 2.0 HDi; please confirm the exact match with your vehicle before ordering.
Warranty and Payment
This engine carries a 24-month parts warranty, valid subject to fitting by a qualified professional. Payment can be spread over multiple instalments, in up to 10 instalments.
EDEN BOITES supports you from quote through to collection of the old unit.
Compatible Vehicles (Ref. UBGA)
This reference also fits:
Reconditioned Peugeot 308 2.0 HDi UBGA Engine
This reconditioned engine for the Peugeot 308 2.0 HDi, with an engine capacity of 1997 cm³, corresponds to engine code UBGA and reference UBGA. It is sold on an exchange basis to restore your vehicle's performance to factory standards at a fraction of the cost of a new engine. Reconditioning follows a rigorous process: the engine is fully stripped down, every component is cleaned and inspected, worn internal parts are replaced as required, and the unit is then reassembled to manufacturer tolerances and bench-tested before dispatch.
Signs That Your Engine Needs Replacing
Several warning signs should alert the owner of a 308 fitted with the 2.0 HDi: a noticeable loss of power under acceleration, abnormal exhaust smoke, unusual metallic noise at idle, an engine warning light that stays on, excessive fuel consumption, or difficulty starting from cold. Persistent knocking or a loss of compression may also indicate that the original block has reached the end of its serviceable life and that a full replacement is needed rather than a one-off repair.
Exchange Basis: Keeping Your Workshop Running
The reconditioned engine reference UBGA is supplied as a bare engine; the exact list of components included is specified on the quote. Under the deferred exchange arrangement, the old unit is not collected before delivery: the reconditioned engine is dispatched to you first, so your workshop is never left without a part and the vehicle is not left off the road. The old unit, block intact, is only collected after delivery and installation of the new engine; its return is required in accordance with the Terms and Conditions. This arrangement allows trade customers to meet the turnaround times promised to their own clients.
A deposit is required at the time of ordering; it is refunded after delivery, installation, and the return and receipt of the old unit.
Compatibility
This reconditioned engine, reference UBGA, corresponds to engine code UBGA as fitted to the Peugeot 308 2.0 HDi; please confirm the exact match with your vehicle before ordering.
Warranty and Payment
This engine carries a 24-month parts warranty, valid subject to fitting by a qualified professional. Payment can be spread over multiple instalments, in up to 10 instalments.
EDEN BOITES supports you from quote through to collection of the old unit.
Compatible Vehicles (Ref. UBGA)
This reference also fits:
Frequently asked questions
Everything you need to know before ordering your part.
3 options, 1 obvious choice
Compare what you really get for your money.
EDEN reconditioned
Up to 3× cheaper than new
- Rebuilt to 0 km
- Tested & certified
- Wear parts replaced with new
- Up to 24-month warranty
- Pay in up to 10 instalments
- Simple, fast exchange process
- Compatibility checked by an expert
- After-sales & advisers in France
- Fast delivery throughout France
- Circular economy, better for the planet
New part
€€€ · up to 3× more expensive
- Maximum reliability
- Manufacturer's warranty
- Full price, no discount
- Sometimes long lead times
- Rarely worth it on an older vehicle
- New manufacturing = heavy on the planet
Used
€ · a lottery
- Unknown mileage
- Not inspected
- No warranty
- Unpredictable price
- Risk of early failure
- Uncertain compatibility
- No after-sales, no follow-up
- Can end up costing twice as much