New Audi A6 Turbo – Ref. 717858-5010S
- 100% secure online payment
- Delivery to your garage or home, anywhere in Europe
- 12-month parts warranty
- Reconditioned and checked turbo
- Part
- Turbo
- Part type
- New turbo
- Make
- Audi
- Model
- A6
- Engine
- 1.9 TDI 130, 2.0 TDI 140
- Fuel
- Diesel
- Reference
- 717858-5010S, 038145702, 038145702E, 038145702EV, 038145702EX, 038145702G, 038145702GU, 038145702GV, 038145702GV505, 038145702GV550, 038145702GX, 038145702J, 038145702JU, 038145702JV, 038145702JX, 038145702N, 038145702NU, 038145702NV, 038145702NX, 038145702V, 038145702X, 57439880012
- Warranty
- 12 months
An expert is here to help
Not sure you've found the right part?
Diagnosing a turbo fault on the Audi A6 before replacement
On an Audi A6 fitted with a 1.9 TDI or 2.0 TDI diesel engine, a loss of power, an engine warning light or an unusual whistling noise under acceleration do not automatically point to the turbocharger. Before any replacement, it is recommended to read fault codes with a diagnostic tool, check the boost pressure, inspect the condition of the air mass meter, the EGR valve and the vacuum hoses, and confirm there is no excessive play or metallic noise from the turbo shaft. Only once these other possible causes have been ruled out does replacing the turbo become the right course of action.
About this Audi A6 turbo
This new turbo is compatible with reference 717858-5010S and is designed for the Audi A6 fitted with a 1.9 TDI 130 or 2.0 TDI 140 engine. It is built to restore the boost pressure required for these diesel engines to run correctly, without affecting the vehicle's original settings.
Engine compatibility
On the Audi A6, this turbo covers the 1.9 TDI 130 (engine codes AVF, AWX) and 2.0 TDI 140 (engine codes BLB, BPW, BRE). Before ordering, it is essential to check the exact reference marked on the old turbo or on the vehicle registration document, as commercial designations can cover several technical variants.
Equivalent references
- 038145702
- 038145702E
- 038145702EV
- 038145702EX
- 038145702G
- 038145702GU
- 038145702GV
- 038145702GV505
- 038145702GV550
- 038145702GX
- 038145702J
- 038145702JU
- 038145702JV
- 038145702JX
- 038145702N
- 038145702NU
- 038145702NV
- 038145702NX
- 038145702V
- 038145702X
- 57439880012
- 717858-5010S
Exchange basis and warranty on this Audi A6 turbo
This new turbo is sold on an exchange basis: return of the old turbo is required, in accordance with our Terms and Conditions. The old unit is only collected after the new turbo has been delivered and fitted, so your vehicle is not left off the road. The part carries a 12-month parts warranty, subject to fitting by a qualified professional. Payment can be spread over multiple instalments, up to 10 instalments.
Fitting advice for the Audi A6
The most common causes of turbo failure on these engines are inadequate lubrication, poor-quality oil or oil that has not been changed at the prescribed intervals, a clogged air filter, or a damaged air intake. Before fitting, check the oil circuit, the intake hoses and the intercooler, and make sure there are no foreign bodies in the inlet tract. When starting up, the turbo must be primed with oil before the first engine start to ensure the bearings are immediately lubricated.
This same turbo also fits
Diagnosing a turbo fault on the Audi A6 before replacement
On an Audi A6 fitted with a 1.9 TDI or 2.0 TDI diesel engine, a loss of power, an engine warning light or an unusual whistling noise under acceleration do not automatically point to the turbocharger. Before any replacement, it is recommended to read fault codes with a diagnostic tool, check the boost pressure, inspect the condition of the air mass meter, the EGR valve and the vacuum hoses, and confirm there is no excessive play or metallic noise from the turbo shaft. Only once these other possible causes have been ruled out does replacing the turbo become the right course of action.
About this Audi A6 turbo
This new turbo is compatible with reference 717858-5010S and is designed for the Audi A6 fitted with a 1.9 TDI 130 or 2.0 TDI 140 engine. It is built to restore the boost pressure required for these diesel engines to run correctly, without affecting the vehicle's original settings.
Engine compatibility
On the Audi A6, this turbo covers the 1.9 TDI 130 (engine codes AVF, AWX) and 2.0 TDI 140 (engine codes BLB, BPW, BRE). Before ordering, it is essential to check the exact reference marked on the old turbo or on the vehicle registration document, as commercial designations can cover several technical variants.
Equivalent references
- 038145702
- 038145702E
- 038145702EV
- 038145702EX
- 038145702G
- 038145702GU
- 038145702GV
- 038145702GV505
- 038145702GV550
- 038145702GX
- 038145702J
- 038145702JU
- 038145702JV
- 038145702JX
- 038145702N
- 038145702NU
- 038145702NV
- 038145702NX
- 038145702V
- 038145702X
- 57439880012
- 717858-5010S
Exchange basis and warranty on this Audi A6 turbo
This new turbo is sold on an exchange basis: return of the old turbo is required, in accordance with our Terms and Conditions. The old unit is only collected after the new turbo has been delivered and fitted, so your vehicle is not left off the road. The part carries a 12-month parts warranty, subject to fitting by a qualified professional. Payment can be spread over multiple instalments, up to 10 instalments.
Fitting advice for the Audi A6
The most common causes of turbo failure on these engines are inadequate lubrication, poor-quality oil or oil that has not been changed at the prescribed intervals, a clogged air filter, or a damaged air intake. Before fitting, check the oil circuit, the intake hoses and the intercooler, and make sure there are no foreign bodies in the inlet tract. When starting up, the turbo must be primed with oil before the first engine start to ensure the bearings are immediately lubricated.
This same turbo also fits
Frequently asked questions
Everything you need to know before ordering your part.
