New SEAT Leon Turbo – Ref. 54409880036
- 100% secure online payment
- Delivery to your garage or home, anywhere in Europe
- 12-month parts warranty
- Reconditioned and checked turbo
- Part
- Turbo
- Part type
- New turbo
- Make
- SEAT
- Model
- Leon
- Engine
- 2.0 TDI 140
- Fuel
- Diesel
- Equivalent references
- 54409880036, 03L253010G, 03L253010GU, 03L253010GV, 03L253010GX, 03L253019P, 03L253019PV, 03L253019PX, 03L253056G, 03L253056GU, 03L253056GV, 03L253056GX, 03L253056P, 03L253056PV, 03L253056PX, 03L253056T, 03L253056TV, 03L253056TX
- Warranty
- 12 months
An expert is here to help
Not sure you've found the right part?
Why does the turbo on your SEAT Leon 2.0 TDI 140 fail?
On the SEAT Leon fitted with the 2.0 TDI 140 engine, the CFFB and CJAA units place considerable strain on the turbocharger — particularly during repeated short journeys or rapid acceleration from a cold start. Engine oil that has degraded, not been changed at the recommended interval, or is of an unsuitable grade will gradually clog the lubrication channels of the central shaft, causing excessive play, whistling noises and ultimately a failure. A blocked air filter or a cracked intercooler allows impurities through or upsets the air pressure balance, accelerating wear on the turbine blades. Switching the engine off immediately after sustained hard driving, without allowing it to cool down, also causes premature wear to the turbo bearings.
Compatibility of the new turbo with the SEAT Leon 2.0 TDI 140
This new turbo is compatible with reference 54409880036, fitted to the SEAT Leon equipped with the 2.0 TDI 140 engine, engine codes CFFB and CJAA. Before placing an order, it is essential to check the reference marked on the old turbo or on the vehicle's identification plate, as certain engine variants may use different turbos depending on the year of manufacture.
Exchange basis and warranty for this new turbo
This turbo is sold on an exchange basis: return of the old turbo is required, in accordance with our Terms and Conditions. It is only collected after the new turbo has been delivered and fitted, so your SEAT Leon is not left off the road during the process. The part is covered by a 12-month parts warranty, subject to fitting being carried out by a qualified professional. Payment for your order can be spread over multiple instalments, in up to 10 instalments.
Advice before fitting the new turbo to your Leon
- Check the oil circuit: clean or replace the oil filter and check for any metal particles in the sump.
- Inspect the intake hoses, boost hoses and intercooler to rule out any leaks or cracks.
- Check the cleanliness of the air intake and the condition of the air filter.
- Prime the new turbo with oil before the first start-up to ensure immediate lubrication of the bearings.
- Drive gently during the first few kilometres and allow the engine to cool down before switching off after hard use.
This same turbo also fits
Why does the turbo on your SEAT Leon 2.0 TDI 140 fail?
On the SEAT Leon fitted with the 2.0 TDI 140 engine, the CFFB and CJAA units place considerable strain on the turbocharger — particularly during repeated short journeys or rapid acceleration from a cold start. Engine oil that has degraded, not been changed at the recommended interval, or is of an unsuitable grade will gradually clog the lubrication channels of the central shaft, causing excessive play, whistling noises and ultimately a failure. A blocked air filter or a cracked intercooler allows impurities through or upsets the air pressure balance, accelerating wear on the turbine blades. Switching the engine off immediately after sustained hard driving, without allowing it to cool down, also causes premature wear to the turbo bearings.
Compatibility of the new turbo with the SEAT Leon 2.0 TDI 140
This new turbo is compatible with reference 54409880036, fitted to the SEAT Leon equipped with the 2.0 TDI 140 engine, engine codes CFFB and CJAA. Before placing an order, it is essential to check the reference marked on the old turbo or on the vehicle's identification plate, as certain engine variants may use different turbos depending on the year of manufacture.
Exchange basis and warranty for this new turbo
This turbo is sold on an exchange basis: return of the old turbo is required, in accordance with our Terms and Conditions. It is only collected after the new turbo has been delivered and fitted, so your SEAT Leon is not left off the road during the process. The part is covered by a 12-month parts warranty, subject to fitting being carried out by a qualified professional. Payment for your order can be spread over multiple instalments, in up to 10 instalments.
Advice before fitting the new turbo to your Leon
- Check the oil circuit: clean or replace the oil filter and check for any metal particles in the sump.
- Inspect the intake hoses, boost hoses and intercooler to rule out any leaks or cracks.
- Check the cleanliness of the air intake and the condition of the air filter.
- Prime the new turbo with oil before the first start-up to ensure immediate lubrication of the bearings.
- Drive gently during the first few kilometres and allow the engine to cool down before switching off after hard use.
This same turbo also fits
Frequently asked questions
Everything you need to know before ordering your part.
