Reconditioned Peugeot 308 1.6 HDi Gearbox – 6-Speed Manual – Ref. 20MB41

Reconditioned Peugeot 308 1.6 HDi Gearbox – Reference 20MB41

This reconditioned gearbox is designed for the Peugeot 308 fitted with the 1.6 HDi engine (1560 cm³), compatible with engine codes 9HZ, 9HR, 9HP and 9HD, and carries the reference 20MB41. Reconditioning involves a full strip-down, thorough cleaning and inspection of every component, replacement of gears, synchros, bearings and seals as required by wear found, followed by reassembly to manufacturer tolerances and a bench test before dispatch.

Signs that your 6-speed manual gearbox needs replacing

On the 308 1.6 HDi, a worn 6-speed manual gearbox often makes itself known through crunching or stiffness when selecting second or fifth gear, a lever that vibrates or becomes hard to engage, a whining noise under acceleration caused by bearing wear, or a judder felt when lifting off the throttle. An oil leak from the casing or a neutral that slips between gears are also warning signs that should not be ignored.

• Crunching or resistance when changing gear
• Lever that vibrates or is stiff to operate
• Whining or grinding under load
• Oil leak from the casing
• Neutral slipping between gears

Exchange basis: your garage is never left standing

This 20MB41 gearbox is sold on an exchange basis: it is rebuilt to 0 km and delivered before your old unit is collected. The original casing or block, kept intact, is only collected after the new gearbox has been delivered and fitted, so the workshop is never held up and can carry on working without delay. Return of the old unit is required, in accordance with our Terms and Conditions.

Compatibility with engine codes 9HZ, 9HR, 9HP, 9HD

Reference 20MB41 is compatible with the 1.6 HDi engines identified by engine codes 9HZ, 9HR, 9HP and 9HD as fitted to the Peugeot 308. Fitment should be confirmed against the vehicle's serial number before ordering.

Warranty and payment

This reconditioned gearbox is covered by a 24-month parts warranty, subject to fitting by a qualified professional. Payment can be spread over multiple instalments, in up to 10 instalments.

EDEN BOITES supports you from quote through to collection of the old unit.