New SEAT Leon Turbo – Ref. IS38
- 100% secure online payment
- Delivery to your garage or home, anywhere in Europe
- 12-month parts warranty
- Reconditioned and checked turbo
- Part
- Turbo
- Part type
- New turbo
- Make
- SEAT
- Model
- Leon
- Engine
- 2.0 TSI Cupra 265 CV, 2.0 TSI Cupra 280 CV, 2.0 TSI Cupra 290 CV, 2.0 TSI Cupra 300 CV, 2.0 TSI Cupra R 310 CV
- Fuel
- Petrol
- Equivalent references
- IS38, 06K145702H, 06K145702HV, 06K145702HX, 06K145702J, 06K145702JV, 06K145702JX, 06K145702M, 06K145702MV, 06K145702MX, 06K145702N, 06K145702NV, 06K145702NX, 06K145722A, 06K145722AV, 06K145722AX, 06K145722H, 06K145722HV, 06K145722HX, 06K145722K, 06K145722P, 06K145722PV, 06K145722PX, 06K145722T, 06K145722TV, 06K145722TX, 06K145725S, 06K145874F, 06K145874FV, 06K145874FX, 06K145874N, 06K145874NV, 06K145874NX, 9VA04, F51CEG-SR023B
- Warranty
- 12 months
An expert is here to help
Not sure you've found the right part?
Why does the SEAT Leon Cupra 2.0 TSI turbo fail prematurely?
On the turbocharged petrol engines of the SEAT Leon Cupra, the turbocharger operates under high temperature and high pressure, making it particularly sensitive to lubrication quality. Using the wrong engine oil, extending oil change intervals beyond the manufacturer's recommendations, or fitting a poor-quality oil filter all accelerate wear on the turbo's bearings and shaft. The repeated spirited driving that is characteristic of this Cupra model places heavy demands on the unit without allowing a gradual warm-up, which speeds up fatigue of the internal components. A clogged air filter or a leaking intercooler can also disrupt turbo operation and cause accelerated wear.
Compatibility of the turbo for the SEAT Leon Cupra 2.0 TSI
This new turbo is compatible with the IS38 reference, intended for the SEAT Leon Cupra and Cupra R fitted with the 2.0 TSI petrol engine of 1984 cm³. The engine codes covered are CJXA, CJXB, CJXC, CJXE, CJXG, CJXH, CYFB, DJHA, DNUA, DNUC and DNUF. Before placing an order, we recommend checking the exact reference printed on the label of your old turbo to confirm compatibility with your vehicle.
Exchange basis and warranty for this new turbo
This new turbo is sold on an exchange basis: the old turbo from your SEAT Leon Cupra must be returned, in accordance with our Terms and Conditions. Return of the old unit is only requested after the new turbo has been delivered and fitted, so your vehicle is not left off the road. The part is covered by a 12-month parts warranty, provided fitting is carried out by a professional. Payment for your order can be spread over several instalments, in up to 10 instalments.
Fitting advice for your Leon Cupra turbo
Before fitting, check the oil circuit, the condition of the hoses and the cleanliness of the air intake to avoid any contamination of the new turbo. Always replace the oil and oil filter at the same time, and check the condition of the intercooler and air filter. On first start-up, prime the turbo with oil before starting the engine to ensure immediate lubrication of the bearings and protect the service life of the part.
This same turbo also fits
Why does the SEAT Leon Cupra 2.0 TSI turbo fail prematurely?
On the turbocharged petrol engines of the SEAT Leon Cupra, the turbocharger operates under high temperature and high pressure, making it particularly sensitive to lubrication quality. Using the wrong engine oil, extending oil change intervals beyond the manufacturer's recommendations, or fitting a poor-quality oil filter all accelerate wear on the turbo's bearings and shaft. The repeated spirited driving that is characteristic of this Cupra model places heavy demands on the unit without allowing a gradual warm-up, which speeds up fatigue of the internal components. A clogged air filter or a leaking intercooler can also disrupt turbo operation and cause accelerated wear.
Compatibility of the turbo for the SEAT Leon Cupra 2.0 TSI
This new turbo is compatible with the IS38 reference, intended for the SEAT Leon Cupra and Cupra R fitted with the 2.0 TSI petrol engine of 1984 cm³. The engine codes covered are CJXA, CJXB, CJXC, CJXE, CJXG, CJXH, CYFB, DJHA, DNUA, DNUC and DNUF. Before placing an order, we recommend checking the exact reference printed on the label of your old turbo to confirm compatibility with your vehicle.
Exchange basis and warranty for this new turbo
This new turbo is sold on an exchange basis: the old turbo from your SEAT Leon Cupra must be returned, in accordance with our Terms and Conditions. Return of the old unit is only requested after the new turbo has been delivered and fitted, so your vehicle is not left off the road. The part is covered by a 12-month parts warranty, provided fitting is carried out by a professional. Payment for your order can be spread over several instalments, in up to 10 instalments.
Fitting advice for your Leon Cupra turbo
Before fitting, check the oil circuit, the condition of the hoses and the cleanliness of the air intake to avoid any contamination of the new turbo. Always replace the oil and oil filter at the same time, and check the condition of the intercooler and air filter. On first start-up, prime the turbo with oil before starting the engine to ensure immediate lubrication of the bearings and protect the service life of the part.
This same turbo also fits
Frequently asked questions
Everything you need to know before ordering your part.
