New SEAT Leon Turbo – Ref. 720855-5007S
- 100% secure online payment
- Delivery to your garage or home, anywhere in Europe
- 12-month parts warranty
- Reconditioned and checked turbo
- Part
- Turbo
- Part type
- New turbo
- Make
- SEAT
- Model
- Leon
- Engine
- 1.9 TDI 130
- Fuel
- Diesel
- Reference
- 720855-5007S, 038253016F, 038253016FU, 038253016FV, 038253016FV115, 038253016FV500, 038253016FV510, 038253016FX, 03G253016Q, 03G253016QU, 03G253016QV, 03G253016QX, 716216-5001S
- Warranty
- 12 months
An expert is here to help
Not sure you've found the right part?
Diagnosing the turbo on your SEAT Leon before replacing it
Before any replacement, it is essential to confirm that the fault lies with the turbocharger itself and not with a peripheral component. On the SEAT Leon fitted with the 1.9 TDI 130 hp engine (code ASZ), a thorough diagnosis involves checking the boost pressure, visually inspecting the compressor wheel blades (axial play, oil traces), verifying that the variable-geometry actuator is functioning correctly, and examining the intake circuit. Excessive exhaust smoke, a noticeable loss of power, an unusual whistling noise under acceleration, or an illuminated engine warning light are all signs that should prompt investigation before considering turbo removal.
Overview of the turbo compatible with reference 720855-5007S
This new turbo is compatible with reference 720855-5007S and has been selected to provide reliable boost on the SEAT Leon (1M1) fitted with the 1.9 TDI 130 hp engine, engine code ASZ, with an engine capacity of 1896 cm³. It meets the technical specifications required for the correct operation of this model's diesel engine, including boost pressure management via variable geometry.
Engine compatibility on the SEAT Leon
This new turbo is intended for the 1.9 TDI 130 hp engine, engine code ASZ, on the SEAT Leon. Before ordering, it is recommended that you check the reference marked on the old turbo removed from the vehicle to ensure perfect compatibility with your specific unit.
Equivalent references
- 038253016F
- 038253016FU
- 038253016FV
- 038253016FV115
- 038253016FV500
- 038253016FV510
- 038253016FX
- 03G253016Q
- 03G253016QU
- 03G253016QV
- 03G253016QX
- 716216-5001S
- 720855-5007S
Exchange basis and warranty for your Leon
This new turbo is sold on an exchange basis: in accordance with our Terms and Conditions, return of your old turbo is required. It is only collected after the new turbo has been delivered and fitted to your SEAT Leon, so your vehicle is never off the road unnecessarily. A 12-month parts warranty applies, subject to fitting being carried out by a qualified professional. Payment can be spread over several instalments, in up to 10 instalments.
Fitting advice for the ASZ engine
On the 1.9 TDI 130, turbo longevity is closely linked to the quality and frequency of engine oil changes, as well as the condition of the air filter and intercooler. Before fitting the new turbo, check the oil circuit (feed and return hoses), ensure there is no carbon build-up in the ducts, and verify the integrity of the air intake. When starting the engine for the first time, it is essential to prime the turbo with oil to prevent dry running on initial start-up, which will help protect the life of the new part.
This same turbo also fits
Diagnosing the turbo on your SEAT Leon before replacing it
Before any replacement, it is essential to confirm that the fault lies with the turbocharger itself and not with a peripheral component. On the SEAT Leon fitted with the 1.9 TDI 130 hp engine (code ASZ), a thorough diagnosis involves checking the boost pressure, visually inspecting the compressor wheel blades (axial play, oil traces), verifying that the variable-geometry actuator is functioning correctly, and examining the intake circuit. Excessive exhaust smoke, a noticeable loss of power, an unusual whistling noise under acceleration, or an illuminated engine warning light are all signs that should prompt investigation before considering turbo removal.
Overview of the turbo compatible with reference 720855-5007S
This new turbo is compatible with reference 720855-5007S and has been selected to provide reliable boost on the SEAT Leon (1M1) fitted with the 1.9 TDI 130 hp engine, engine code ASZ, with an engine capacity of 1896 cm³. It meets the technical specifications required for the correct operation of this model's diesel engine, including boost pressure management via variable geometry.
Engine compatibility on the SEAT Leon
This new turbo is intended for the 1.9 TDI 130 hp engine, engine code ASZ, on the SEAT Leon. Before ordering, it is recommended that you check the reference marked on the old turbo removed from the vehicle to ensure perfect compatibility with your specific unit.
Equivalent references
- 038253016F
- 038253016FU
- 038253016FV
- 038253016FV115
- 038253016FV500
- 038253016FV510
- 038253016FX
- 03G253016Q
- 03G253016QU
- 03G253016QV
- 03G253016QX
- 716216-5001S
- 720855-5007S
Exchange basis and warranty for your Leon
This new turbo is sold on an exchange basis: in accordance with our Terms and Conditions, return of your old turbo is required. It is only collected after the new turbo has been delivered and fitted to your SEAT Leon, so your vehicle is never off the road unnecessarily. A 12-month parts warranty applies, subject to fitting being carried out by a qualified professional. Payment can be spread over several instalments, in up to 10 instalments.
Fitting advice for the ASZ engine
On the 1.9 TDI 130, turbo longevity is closely linked to the quality and frequency of engine oil changes, as well as the condition of the air filter and intercooler. Before fitting the new turbo, check the oil circuit (feed and return hoses), ensure there is no carbon build-up in the ducts, and verify the integrity of the air intake. When starting the engine for the first time, it is essential to prime the turbo with oil to prevent dry running on initial start-up, which will help protect the life of the new part.
This same turbo also fits
Frequently asked questions
Everything you need to know before ordering your part.
