New Dacia Logan Turbo – Ref. 54359880033

Identifying the correct turbo reference for your Dacia Logan

Before placing any order, it is essential to check the reference printed on the label of your old turbo, directly on the compressor housing. On the Dacia Logan fitted with the 1.5 dCi engine, several references may have been fitted at the factory or during previous replacements, making this check indispensable before any purchase. This new turbo is compatible with reference 54359880033, a widely used reference on this generation of Logan.

Engine variants covered on the Logan 1.5 dCi

This new turbo is intended for Dacia Logan models fitted with the 1.5 dCi diesel engine, producing 65 or 68 hp depending on the version, with an engine capacity of 1461 cm3. These units are identified by the engine codes K9K, available in several variants (K9K 700, K9K 714, K9K 792, K9K 800, among others). Given the many variants of this engine, only a physical comparison of the reference on the old turbo can guarantee a perfect match for your vehicle.

Exchange basis and warranty for this Logan turbo

This turbo is sold on an exchange basis: return of your old turbo is required, in accordance with our Terms and Conditions. It is only collected after the new turbo has been delivered and fitted, so that your Logan is not left off the road during the process. This new turbo comes with a 12-month parts warranty, subject to fitting being carried out by a qualified professional. Payment can be spread over several instalments, in up to 10 instalments.

Symptoms and common causes of failure on the K9K engine

On the 1.5 dCi, a gradual loss of power, exhaust smoke, or an unusual whistling noise under acceleration are often the first signs of a failing turbo. The most common causes of failure on this unit include insufficient lubrication due to unsuitable oil quality or missed oil changes, a clogged air filter allowing impurities through, or a cracked intercooler. Driving too hard without allowing the engine to cool down before switching off also accelerates turbo wear.

Advice before and after fitting

Before fitting this new turbo to your Logan, carefully inspect the oil circuit (hoses, feed and return lines) as well as the air intake, to avoid any contamination of the new component. On first start-up, priming with oil is recommended to ensure immediate lubrication of the bearings and extend the service life of the turbo.

This same turbo also fits

• New Dacia Sandero Turbo – Ref. 54359880033
• New Renault Clio Turbo – Ref. 54359880033